Optimization of the drilling parameters for the cutting forces in B4C-reinforced Al-7XXX-series alloys based on the Taguchi method = Optimiranje parametrov vrtanja za sile vrtanja pri zlitinah Al-7XXX, ojačanih z B4C s Taguchijevo metodo
Taşkesen, Ahmet ; Kütükde, Kenan
In this study, drilling tests of aluminum-based composites produced with the powder-metallurgy (PM) technique and reinforced with boron-carbide (B4C) particles were carried out with three different ...types of drills under dry cutting conditions. In order to determine the mechanical properties of the produced composites, hardness and tensile tests were performed. Moreover, the effects of the machining parameters such as cutting speed, feed rate, particle fraction and cutting-tool material, and of their interactions on the thrust force and cutting torque were determined with the Taguchi experimental design. Drilling parameters were optimized in terms of cutting forces (thrust force and torque). Furthermore, an analysis of variance (ANOVA) was conducted to obtain the degree of the effect of the parameters. The most influential control factors for the cutting forces were found to be the particle fraction and feed rate. According to the experimental results, the thrust force and cutting torque increased significantly as the feed rate or the particle content increased. On the other hand, the influence of the drill-bit material and the interactions of the factors for the cutting forces were quite low.
Bibliografsko gradivo je bilo uspešno dodano na polico.
Dodajanje bibliografskega gradiva na polico ni uspelo.
Gradivo je že na polici.
Trajna povezava
URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto
Faktor vpliva
Izdaja
Kategorija
Razvrstitev
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Izberite knjižnično izkaznico:
Baze podatkov,
v katerih je revija indeksirana
Ime baze podatkov
Področje
Leto
Povezave do osebnih bibliografij avtorjev
Povezave do podatkov o raziskovalcih v sistemu SICRIS
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Citiranje
Funkcionalnost trenutno ni na voljo. Prosimo, poskusite kasneje.
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi