(UL)
-
Influence of contact parameters on the tribological behaviour of various graphite/graphite sliding electrical contactsPoljanec, Dejan ; Kalin, Mitjan ; Kumar, LudvikSliding electrical contacts are used in devices for the conduction of electrical power or the electrical signals between stationary and moving parts. The most widely used electrical-sliding system is ... still the conventional slip ring and brush assembly. In the last decade, the lifetime of ring-brush contacts was extended through the use of better contact-material combinations and design improvements. However, the extremely rapid electrification of many more components has put severe demands on this extended lifetime. This paper presents a novel, patented design for two sliding discs that allows the use of advantageous graphite/graphite contacts. In the literature there is a serious lack of understanding the performance of sliding electrical contacts with graphite/graphite pairs, which depends on the key contact parameters, as well as the influence and potential of the different available graphite materials. The normal load, the contact velocity, the electric current, and the three self-mated graphite contacts, i.e., hard carbon, electrographite and polymer-bonded graphite, were investigated. The results indicate that the contact conditions influence the performance, which is also very dependent on the graphite materials. The polymer-bonded graphite showed the best results in this study.Vir: Wear. - ISSN 0043-1648 (Vol. 406-407, Jul. 2018, str. 75-83)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2018Jezik - angleškiCOBISS.SI-ID - 16085019
Avtor
Poljanec, Dejan |
Kalin, Mitjan |
Kumar, Ludvik
Teme
sliding electrical contacts |
slip-ring |
graphite |
friction |
wear |
electric current |
drsni električni kontakti |
drsni obroči |
grafit |
trenje |
obraba |
električni tok
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Poljanec, Dejan | 35245 |
Kalin, Mitjan | 14556 |
Kumar, Ludvik | 21019 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: