(UM)
-
Technological parameters optimization by GA and influence on the quality of laser cuttingČuš, Franc, 1953- ; Milfelner, Matjaž ; Balič, JožeThe paper discusses the use of the laser system in production and the influence of laser cutting parameters on the quality of manufacture. In order to reach high accuracies of laser cutting it is ... necessary to introduce new machining technologies, to automate the cutting process and to adapt the cutting process to different sizes and shapes of workpieces and to other requirements in machining. In the final stage the quality of the cutting is analyzed and the laser cutting parameters are optimized. Therefore it is very important to describe adequately the cut with various quality characteristics (cut shape, waviness and/or roughness of the cut surface and presence of burr on the workpiece lower edge). The paper describes the influence of various technological parameters on the quality of laser cutting for the C02 laser system. Initially, the cutting parameters (cutting speed, output power of laser beam, frequency, working mode, gas pressure, etc.) are important for the programmer of the laser system and in the second stage for the machine operator. Presentation of applicability is based on a practical example of optimization from production by genetic algorithm. The benefits of use of laser systems are savings of material, possibility of machining different materials of different thickness, high quality and productivity and the fact that the tool change is not necessary and reduction of production costs.Vrsta gradiva - prispevek na konferenciLeto - 2006Jezik - angleškiCOBISS.SI-ID - 10615830
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Čuš, Franc, 1953- | 08634 |
Milfelner, Matjaž | 19093 |
Balič, Jože | 04011 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: