ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
Ductile crack growth initiation in welded joints - micromechanical approach
Rakin, M. ...
The integrity of welded structures depends on the load-carrying capacities of their welded joints. Having in mind that welding process produces a large microstructural gradient through the weld, ...resulting in variation of mechanical properties, micromechanical analysis that correlates the local stresses and strains with fracture toughness seems to be appropriate to ensure integrity. In this paper, a micromechanical model for ductile fracture has been applied for assessment of the crack growth onset in the strength-mismatched welded joints of various widths. High-strength low-alloyed (HSLA) steel is used as the base metal in quenched and tempered condition. The flux-cored arcwelding process in shielding gas is used. Two different fillers are selected to obtain over- and undermatched weld metal. Precracked (single-edged notch bend - SENB) specimens are experimentally and numerically analysed in static conditions of external loading. Computations of the void volume fraction ahead of the crack tip are performed using the FE method. Volume fraction of non-metallic inclusions in the materials forming the joint was determined using the quantitative microstructural analysis. Based on the critical value ▫$f_c$▫, determined on round tensile specimens, CTOD at ductile crack growth initiation on SENB specimens is determined. It has been found that the micromechanical model enables determination of the constraint effect induced by different widths of the welded joints at the onset of the crack growth in tested specimens.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
