-
Performance study of EDM process parameters using ▫$TiC/ZrSiO_4$▫ particulate-reinforced copper composite electrodeSaminatharaja, Duraisivam ...Electrical discharge machines (EDM) are widely employed in machining components containing complex profiles of hard-to-cut and machining materials. However, the fabrication-of-tool time for the EDM ... process is excessively high in the traditional machining method, which significantly affects the machining rate. Therefore, in this paper, a powder metallurgy (PM) technique is employed to fabricate the tool electrode using copper (Cu), titanium carbide (TiC), and zirconium silicate (ZrSiO4) for different combinations. An L18 orthogonal array (OA) is planned using the following input parameters: three types of tools (Cu, Cu90, Cu80), peak current (PC) [A], pulse on time (PT) [µs], and gap voltage (GV) [V]. The performance of EDM is evaluated through the material removal rate (MRR), tool wear rate (TWR), and surface roughness (SR). The process parameters are optimized using two different techniques: the technique for order of preference by similarity to the ideal solution (TOPSIS) and grey relational analysis (GRA). TOPSIS and GRA optimization techniques produce the same optimal parametric solution for less TWR, SR, and higher MRR with the combination of the Cu90 tool, E8 APC, 15 µs pulse PT, and 75 V GV. Based on the ANOVA table of TOPSIS, pulse on time plays a major role, contributing 46.8 % of the machining performance; peak current shows the most significant contribution of 39.3 % of the machining performance using GRA values. Furthermore, the scanning electron microscope (SEM) image analyses are carried out on the machined workpiece surface to understand the effect of tools on machining quality.Source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 67, no. 11, Nov. 2021, str. 547-556)Type of material - article, component partPublish date - 2021Language - englishCOBISS.SI-ID - 87277827
Author
Saminatharaja, Duraisivam |
Suresh, Periyakgounder |
Selvaraj, Mahalingam |
Elangandhi, Jamuna
Topics
powder metallurgy |
composite tool |
copper |
electrical discharge machine |
technique for order of preference by similarity to ideal solution |
grey relational analysis |
prašna metalurgija |
kompozitno orodje |
baker |
EDM |
TOPSIS |
GRA
![loading ... loading ...](themes/default/img/ajax-loading.gif)
source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 67, no. 11, Nov. 2021, str. 547-556)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Saminatharaja, Duraisivam | ![]() |
Suresh, Periyakgounder | ![]() |
Selvaraj, Mahalingam | ![]() |
Elangandhi, Jamuna | ![]() |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.