DIKUL - logo
Institute of Metals and Technology, Ljubljana (IMTLJ)
Spoštovane uporabnike knjižnice IMT obveščamo, da je zaradi urejanja knjižnične zbirke moten prost dostop do gradiva,
zato vas vljudno prosimo, da nas glede knjižničnega gradiva predhodno kontaktirate na e-mail:
knjiznica@imt.si

Hvala za razumevanje!
Knjižnica IMT
  • Temperature behaviour of the boride layer of a low-carbon microalloyed steel = Temperaturno vedenje boridnega sloja na maloogljičnem mikrolegiranem jeklu
    Ucar, Nazim ; Aytar, Omer Baris ; Calik, Adnan
    In this work, the boronizing of low-carbon microalloyed steels was carried out in a solid medium using the powder-pack method. After boronizing, a boride layer and the presence of both FeB and Fe2B ... phases in the boride layer were revealed with classic metallographic techniques and X-ray diffraction (XRD) analysis. The presence and distribution of alloying elements on the boride phases was measured using glow-discharge optical emission spectrometry (GDOES) and the distance between the surface and the substrate was taken as the layer thickness. It was found that higher boronizing temperatures resulted in an increase in the layer thickness, from 7 [mu]m to 105 [mu]m. In addition, microhardness tests of the boronized steel samples showed a significant increase in the surface hardness caused by the increased boronizing temperature. The boride layer had a hardness of over 910 HV0.1 and 1320 HV0.1 for 973 K and 1273 K, respectively, while the substrate's hardness was approximately 145 HV0.1. Kinetic studies showed that the diffusion process is thermally activated, with the mean value of the activation energy being close to 194 kJ/mol.
    Source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 46, št. 6, 2012, str. 621-625)
    Type of material - article, component part
    Publish date - 2012
    Language - english
    COBISS.SI-ID - 956330

    Link(s):

    http://www.imt.si/Revija/
    Digitalna knjižnica Slovenije - dLib.si

Shelf entry