In spite of the clinical need, there is a major gap in rapid diagnostics for identification and quantitation of E. coli and other pathogens, also regarded as the biggest bottleneck in the fight ...against the spread of antimicrobial resistant bacterial strains. This study reports for the first time an optical, smartphone-based microfluidic fluorescence sandwich immunoassay capable of quantifying E. coli in buffer and synthetic urine in less than 25 min without sample preparation nor concentration. A limit of detection (LoD) up to 240 CFU/mL, comensurate with cut-off for UTIs (103–105 CFUs/mL) was achieved. Replicas of full response curves performed with 100–107 CFUs/mL of E. coli K12 in synthetic urine yielded recovery values in the range 80–120%, assay reproducibility below 30% and precision below 20%, therefore similar to high-performance automated immunoassays. The unrivalled LoD was mainly linked to the ‘open fluidics’ nature of the 10-bore microfluidic strips used that enabled passing a large volume of sample through the microcapillaries coated with capture antibody. The new smartphone based test has the potential of being as a rapid, point-of-care test for rule-in of E. coli infections that are responsible for around 80% of UTIs, helping to stop the over-prescription of antibiotics and the monitoring of patients with other symptomatic communicable diseases caused by E. coli at global scale.
•Smartphone quantitation of E. coli in synthetic urine using FEP microfluidic strips.•Fluorescence, ELISA detection in less than 25 min without sample preparation.•A limit of detection, LoD of 240 CFU/mL, compatible with cut-off for UTIs.•Recovery, reproducibility and precision comparable to high-performance immunoassays.
The lipid composition of cellular membranes and the balance between the different lipid components can be impacted by aging, certain pathologies, specific diets and other factors. This is the case in ...a subgroup of individuals with psychiatric disorders, such as schizophrenia, where cell membranes of patients have been shown to be deprived in polyunsaturated fatty acids (PUFAs), not only in brain areas where the target receptors are expressed but also in peripheral tissues. This PUFA deprivation thus represents a biomarker of such disorders that might impact not only the interaction of antipsychotic medications with these membranes but also the activation and signaling of the targeted receptors embedded in the lipid membrane. Therefore, it is crucial to understand how PUFAs levels alterations modulate the different physical properties of membranes.
In this paper, several biophysical approaches were combined (Laurdan fluorescence spectroscopy, atomic force microscopy, differential scanning calorimetry, molecular modeling) to characterize membrane properties such as fluidity, elasticity and thickness in PUFA-enriched cell membranes and lipid model systems reflecting the PUFA imbalance observed in some diseases. The impact of both the number of unsaturations and their position along the chain on the above properties was investigated. Briefly, data revealed that PUFA presence in membranes increases membrane fluidity, elasticity and flexibility and decreases its thickness and order parameter. Both the level of unsaturation and their position affect these membrane properties.
Display omitted
•Psychiatric disorders are associated with altered PUFA levels in cell membranes.•PUFA impacts on membrane physical and mechanical properties were investigated.•Cellular and model membranes were studied in a multimodal biophysical approach.•Changes in membrane elasticity, flexibility, fluidity, thickness and ordering were observed.•Both the degree and position of unsaturation affect the membrane properties.
G protein coupled receptors (GPCRs) are a class of membrane proteins that sense extracellular signals ranging from light to odorants and small molecules and activate intracellular signaling pathways ...that control important physiological responses. Being composed of 7 transmembrane helices linked by extracellular and intracellular loops, the great majority of the sequence of these receptors is embedded in the lipid membrane. Therefore, it is expected GPCR structure and function to be impacted by the surrounding lipid environment and the lipid membrane physico-chemical and mechanical properties. A large number of examples from the literature is provided to highlight the role of the lipid nature (lipid headgroup, membrane polyunsaturation and cholesterol) and membrane physical and mechanical properties (curvature elastic stress, membrane thickness and hydrophobic mismatch, fluidity) in the activity of different GPCRs. In addition, lipids are important co-factors being identified in very specific locations in several GPCR structures. GPCRs and G proteins can also be lipid post-translationally modified and such events can significantly impact membrane binding, trafficking and signaling. These aspects are all treated in this review. Understanding how the lipid can modulate GPCR activity is important not only from a fundamental point of view but also due to the fact that certain pathologies, where GPCRs are central targets, have been associated with important lipid imbalance. Establishing a link between the lipid pathological imbalance and the receptor functioning in such environment is thus essential as it can open avenues to potentially innovative therapeutic strategies.
Display omitted
•G-protein coupled receptors (GPCRs) are inserted in lipid membranes.•Lipids regulate membrane physico-chemical and mechanical properties of membranes.•GPCRs are impacted by the lipid environment.•Lipids are GPCR co-factors.•GPCRs and effectors are lipidated.
Conspectus Here we describe an experimental technique, termed plasmon waveguide resonance (PWR) spectroscopy that enables the characterization of molecular interactions occurring at the level of ...anisotropic thin films as lipid membranes and therein inserted or interacting molecules. PWR allows one to characterize such molecular interactions at different levels: (1) acquire binding curves and calculate dissociation constants; (2) obtain kinetic information; (3) obtain information about associated anisotropy changes and changes in membrane thickness; (4) obtain insight about lateral homogeneity (formation of domains). Points 1, 2, and 4 can be directly obtained from the data. Point 3 requires spectral fitting procedures so that the different optical parameters characterizing thin films as proteolipid membranes, namely refractive index and extinction coefficient for both p- (TM component of light that is parallel to the incident light) and s- (TE component of light that is perpendicular to the incident light) polarizations and thickness, can be determined. When applied to membrane proteins as the G-protein coupled receptor (GPCR) family, both ligand-induced conformational changes of the receptor can be followed as well as interactions with effectors (e.g., G-proteins). Additionally, by either altering the lipid composition in cellular membranes or specifically controlling its composition in the case of lipid model membranes with reconstituted proteins, the role of the lipid environment in receptor activation and signaling can be determined. Additionally, the eventual partition of receptors in different lipid microdomains (e.g., lipid rafts) can be followed. Such information can be obtained ex cellulo with mammalian cell membrane fragments expressing the protein of interest and/or in vitro with lipid model systems where the protein under investigation has been reconstituted. Moreover, PWR can also be applied to directly follow the reconstitution of membrane proteins in lipid model membranes. The measurements are performed directly (no labeling of molecular partners), in real time and with very high sensitivity. Here we will discuss different aspects of GPCR activation and signaling where PWR brought important information in parallel with other approaches. The utility of PWR is not limited to GPCRs but can be applied to any membrane protein. PWR is also an excellent tool to characterize the interaction of membrane active molecules (as cell penetrating, antimicrobial, viral and amyloid peptides) with lipids. A brief section is dedicated to such applications, with particular emphasis on amyloid peptides. To finalize, as PWR is a homemade technology, ongoing instrument developments aiming at breaking current experimental limitations are briefly discussed, namely, the coupling of PWR with electrochemical measurements and the expansion of measurements from the visible to the infrared region.
Plasmon waveguide resonance (PWR) sensors exhibit narrow resonances at the two orthogonal polarizations, transverse electric (TE) and transverse magnetic (TM), which are narrower by almost an order ...of a magnitude than the standard surface plasmon resonance (SPR), and thus the figure of merit is enhanced. This fact is useful for measuring optical anisotropy of materials on the surface and determining the orientation of molecules with high resolution. Using the diverging beam approach and a liquid crystal retarder, we present experimental results by simultaneous detection of TE and TM polarized resonances as well as using fast higher contrast serial detection with a variable liquid crystal retarder. While simultaneous detection makes the system simpler, a serial one has the advantage of obtaining a larger contrast of the resonances and thus an improved signal-to-noise ratio. Although the sensitivity of the PWR resonances is smaller than the standard SPR, the angular width is much smaller, and thus the figure of merit is improved. When the measurement methodology has a high enough angular resolution, as is the one presented here, the PWR becomes advantageous over other SPR modes. The possibility of carrying out exact numerical simulations for anisotropic molecules using the 4 × 4 matrix approach brings another advantage of the PWR over SPR on the possibility of extracting the orientation of molecules adsorbed to the surface. High sensitivity of the TE and TM signals to the anisotropic molecules orientation is found here, and comparison to the experimental data allowed detection of the orientation of lipids on the sensor surface. The molecular orientations cannot be fully determined from the TM polarization alone as in standard SPR, which underlines the additional advantage of the PWR technique.
The study of G-protein-coupled receptor (GPCR ) mechanisms of activation and signaling often the isolation, purification, and reconstitution of GPCRs in model lipid membranes. GPCR reconstitution ...from a detergent-micelle system into model membranes is usually a laborious process whose success is tested after the whole process is over by rather indirect methods such as SDS-PAGE and western blotting or by biophysical approaches. Following that, protein activity is measured in yet a different experimental setup. Overall, the whole procedure is tedious, long, and often requires high quantities of material and the use of labeled proteins. Herein, a protocol is described to follow, in a single experimental setup, both GPCR reconstitution from detergent micelles into planar lipid bilayers and its ligand-binding activity using plasmon waveguide resonance. Alternatively, receptor/ligand interactions can also be investigated from cell membrane fragments overexpressing the receptor of interest, bypassing isolation and reconstitution procedures. The method is direct, sensitive, and does not rely on the use of any labeled material.
Penetratin is a positively charged cell-penetrating peptide (CPP) that has the ability to bind negatively charged membrane components, such as glycosaminoglycans and anionic lipids. Whether this ...primary interaction of penetratin with these cell surface components implies that the peptide will be further internalized is not clear.
Using mass spectrometry, the amount of internalized and membrane bound penetratin remaining after washings, were quantified in three different cell lines: wild type (WT), glycosaminoglycans- (GAG(neg)) and sialic acid-deficient (SA(neg)) cells. Additionally, the affinity and kinetics of the interaction of penetratin to membrane models composed of pure lipids and membrane fragments from the referred cell lines was investigated, as well as the thermodynamics of such interactions using plasmon resonance and calorimetry.
Penetratin internalized with the same efficacy in the three cell lines at 1 µM, but was better internalized at 10 µM in SA(neg)>WT>GAG(neg). The heat released by the interaction of penetratin with these cells followed the ranking order of internalization efficiency. Penetratin had an affinity of 10 nM for WT cells and µM for SA(neg) and GAG(neg) cells and model membrane of phospholipids. The remaining membrane-bound penetratin after cells washings was similar in WT and GAG(neg) cells, which suggested that these binding sites relied on membrane phospholipids. The interaction of penetratin with carbohydrates was more superficial and reversible while it was stronger with phospholipids, likely because the peptide can intercalate between the fatty acid chains.
These results show that accumulation and high-affinity binding of penetratin at the cell-surface do not reflect the internalization efficacy of the peptide. Altogether, these data further support translocation (membrane phospholipids interaction) as being the internalization pathway used by penetratin at low micromolecular concentration, while endocytosis is activated at higher concentration and requires accumulation of the peptide on GAG and GAG clustering.
Cell-penetrating peptides (CPPs) share the property of cellular internalization. The question of how these peptides reach the cytoplasm of cells is still widely debated. Herein, we have used a mass ...spectrometry-based method that enables quantification of internalized and membrane-bound peptides. Internalization of the most used CPP was studied at 37 °C (endocytosis and translocation) and 4 °C (translocation) in wild type and proteoglycan-deficient Chinese hamster ovary cells. Both translocation and endocytosis are internalization pathways used by CPP. The choice of one pathway versus the other depends on the peptide sequence (not the number of positive changes), the extracellular peptide concentration, and the membrane components. There is no relationship between the high affinity of these peptides for the cell membrane and their internalization efficacy. Translocation occurs at low extracellular peptide concentration, whereas endocytosis, a saturable and cooperative phenomenon, is activated at higher concentrations. Translocation operates in a narrow time window, which implies a specific lipid/peptide co-import in cells.
This paper describes a simple procedure to determine the local thickness of a thin anisotropic layer. It also discriminates between isotropic and anisotropic regions, provided a smoothness hypothesis ...on the refractive index distribution is satisfied. The procedure is based on the analysis of surface plasmon resonance (SPR) data acquired in an imaging mode. The general arrangement of the setup is the Kretschmann configuration. We show, on an azobenzene modified polymer layer, good agreement between atomic force microscopy and optical measurements of thickness variation.