The main purpose of this work is to provide a comprehensive overview on the preparation of multifunctional epoxies, with improved antimicrobial activity and enhanced mechanical properties through ...nanomodification. In the first section, we focus on the approaches to achieve antimicrobial activity, as well as on the methods used to evaluate their efficacy against bacteria and fungi. Relevant application examples are also discussed, with particular reference to antifouling and anticorrosion coatings for marine environments, dental applications, antimicrobial fibers and fabrics, and others. Subsequently, we discuss the mechanical behaviors of nanomodified epoxies with improved antimicrobial properties, analyzing the typical damage mechanisms leading to the significant toughening effect of nanomodification. Some examples of mechanical properties of nanomodified polymers are provided. Eventually, the possibility of achieving, at the same time, antimicrobial and mechanical improvement capabilities by nanomodification with nanoclay is discussed, with reference to both nanomodified epoxies and glass/epoxy composite laminates. According to the literature, a nanomodified epoxy can successfully exhibit antibacterial properties, while increasing its fracture toughness, even though its tensile strength may decrease. As for laminates—obtaining antibacterial properties is not followed by improved interlaminar properties.
Cyclic and polyphosphazenes are extremely interesting and versatile substrates characterized by the presence of -P=N- repeating units. The chlorine atoms on the P atoms in the starting materials can ...be easily substituted with a variety of organic substituents, thus giving rise to a huge number of new materials for industrial applications. Their properties can be designed considering the number of repetitive units and the nature of the substituent groups, opening up to a number of peculiar properties, including the ability to give rise to supramolecular arrangements. We focused our attention on the extensive scientific literature concerning their biomedical applications: as antimicrobial agents in drug delivery, as immunoadjuvants in tissue engineering, in innovative anticancer therapies, and treatments for cardiovascular diseases. The promising perspectives for their biomedical use rise from the opportunity to combine the benefits of the inorganic backbone and the wide variety of organic side groups that can lead to the formation of nanoparticles, polymersomes, or scaffolds for cell proliferation. In this review, some aspects of the preparation of phosphazene-based systems and their characterization, together with some of the most relevant chemical strategies to obtain biomaterials, have been described.
Vegetable oils are bio-based and sustainable starting materials that can be used to develop chemicals for industrial processes. In this study, the functionalization of three vegetable oils (grape, ...hemp, and linseed) with maleic anhydride was carried out either by conventional heating or microwave activation to obtain products that, after further reactions, can enhance the water dispersion of oils for industrial applications. To identify the most abundant derivatives formed, trans-3-octene, methyl oleate, and ethyl linoleate were reacted as reference systems. A detailed NMR study, supported by computational evidence, allowed for the identification of the species formed in the reaction of trans-3-octene with maleic anhydride. The signals in the
H NMR spectra of the alkenyl succinic anhydride (ASA) moieties bound to the organic chains were clearly identified. The reactions achieved by conventional heating were carried out for 5 h at 200 °C, resulting in similar or lower amounts of ASA units/g of oil with respect to the reactions performed by microwave activation, which, however, induced a higher viscosity of the samples.
Biochar is a porous material obtained by biomass thermal degradation in oxygen-starved conditions. It is nowadays applied in many fields. For instance, it is used to synthesize new materials for ...environmental remediation, catalysis, animal feeding, adsorbent for smells, etc. In the last decades, biochar has been applied also to soils due to its beneficial effects on soil structure, pH, soil organic carbon content, and stability, and, therefore, soil fertility. In addition, this carbonaceous material shows high chemical stability. Once applied to soil it maintains its nature for centuries. Consequently, it can be considered a sink to store atmospheric carbon dioxide in soils, thereby mitigating the effects of global climatic changes. The literature contains plenty of papers dealing with biochar’s environmental effects. However, a discrepancy exists between studies dealing with biochar applications and those dealing with the physical-chemistry behind biochar behavior. On the one hand, the impression is that most of the papers where biochar is tested in soils are based on trial-and-error procedures. Sometimes these give positive results, sometimes not. Consequently, it appears that the scientific world is divided into two factions: either supporters or detractors. On the other hand, studies dealing with biochar’s physical-chemistry do not appear helpful in settling the factions’ problem. This review paper aims at collecting all the information on physical-chemistry of biochar and to use it to explain biochar’s role in different fields of application.
A novel binuclear palladium(II) complex (AsPh3)2ClPd(L)PdCl (LPd2) has been synthesized by reacting 2-oxo-1,2-dihydroquinoline-3-carbaldehyde-4(N,N)-dimethylthiosemicarbazone (HL) with PdCl2(AsPh3)2, ...and the molecular structure was confirmed by single crystal X-ray diffraction studies. The DNA interactions of the free ligand and of the complex have been evaluated by absorption and ethidium bromide (EB) competitive studies which revealed that the complex could interact with calf thymus DNA (CT-DNA) through intercalation. In addition, the interactions with bovine serum albumin (BSA) were also studied showing that the new binuclear palladium complex had a strong binding affinity with BSA.
A new binuclear 2-oxo-1,2-dihydroquinoline-3-carbaldehyde-4(N,N)-dimethylthiosemicabazone palladium(II) complex has been synthesized and characterized by the X-ray structure. Its binding properties towards calf thymus DNA and bovine serum albumin (BSA) have been evaluated. Display omitted
•Syntheses of new binuclear Pd(II) complex with thiosemicarbazone.•The new Pd(II) complex interacts with calf thymus DNA via intercalation.•The complex binds with bovine serum albumin more strongly than the free ligand.
Two nanomicas of similar composition, containing muscovite and quartz, but with different particle size distributions, have been used to prepare transparent epoxy nanocomposites. Their homogeneous ...dispersion, due to the nano-size, was achieved even without being organically modified, and no aggregation of the nanoparticles was observed, thus maximizing the specific interface between matrix and nanofiller. No exfoliation or intercalation has been observed by XRD, despite the significant dispersion of the filler in the matrix which produced nanocomposites with a loss in transparency in the visible domain of less than 10% in the presence of 1% wt and 3% wt of mica fillers. The presence of micas does not affect the thermal behavior of the nanocomposites, which remains similar to that of the neat epoxy resin. The mechanical characterization of the epoxy resin composites revealed an increased Young's modulus, whereas tensile strength was reduced. A peridynamics-based representative volume element approach has been implemented to estimate the effective Young's modulus of the nanomodified materials. The results obtained through this homogenization procedure have been used as input for the analysis of the nanocomposite fracture toughness, which has been carried out by a classical continuum mechanics-peridynamics coupling approach. Comparison with the experimental data confirms the capability of the peridynamics-based strategies to properly model the effective Young's modulus and fracture toughness of epoxy-resin nanocomposites. Finally, the new mica-based composites exhibit high values of volume resistivity, thus being excellent candidates as insulating materials.
A reactor with two interchangeable plasma sources was developed and tested in water decontamination experiments using phenol as model organic pollutant. The two configurations were characterized and ...compared by determining the reactive species produced in the aqueous phase (concentration of ozone and of hydrogen peroxide as a function of input energy and rate of OH radical production) and the efficiency in phenol degradation. The streamer discharge performed significantly better than the dielectric barrier discharge: the rate of OH radicals production was ten times faster and the efficiency of phenol degradation, as measured by the G50 parameter, was more than twice as large. Moreover, the streamer discharge induced process was kinetically faster and achieved better mineralization yields in shorter times.
A new atmospheric plasma reactor for water treatment is developed and tested, with two interchangeable electrode configurations to implement DBD or streamer regimes. The performance is evaluated in terms of production of reactive species (O3, H2O2, and OH radicals) and by monitoring the degradation of phenol, a model organic pollutant, and its mineralization to CO2.
A cleaner alternative to the current inefficient oxidation of cyclohexane to adipic acid is presented. Direct oxidation of neat cyclohexene by aq. hydrogen peroxide to adipic acid is selectively ...achieved in good yield (46%), in the presence of the recyclable C-homoscorpionate iron(II) complex FeCl2{κ3-HC(pz)3} (pz = pyrazol-1-yl) and microwave irradiation, by a nitrous oxide-free protocol.
Ferrofluids are nanomaterials consisting of magnetic nanoparticles that are dispersed in a carrier fluid. Their physical properties, and hence their field of application are determined by intertwined ...compositional, structural, and magnetic characteristics, including interparticle magnetic interactions. Magnetic nanoparticles were prepared by thermal decomposition of iron(III) chloride hexahydrate (FeCl₃·6H₂O) in 2-pyrrolidone, and were then dispersed in two different fluids, water and polyethylene glycol 400 (PEG). A number of experimental techniques (especially, transmission electron microscopy, Mössbauer spectroscopy and superconducting quantum interference device (SQUID) magnetometry) were employed to study both the as-prepared nanoparticles and the ferrofluids. We show that, with the adopted synthesis parameters of temperature and FeCl₃ relative concentration, nanoparticles are obtained that mainly consist of maghemite and present a high degree of structural disorder and strong spin canting, resulting in a low saturation magnetization (~45 emu/g). A remarkable feature is that the nanoparticles, ultimately due to the presence of 2-pyrrolidone at their surface, are arranged in nanoflower-shape structures, which are substantially stable in water and tend to disaggregate in PEG. The different arrangement of the nanoparticles in the two fluids implies a different strength of dipolar magnetic interactions, as revealed by the analysis of their magnetothermal behavior. The comparison between the magnetic heating capacities of the two ferrofluids demonstrates the possibility of tailoring the performances of the produced nanoparticles by exploiting the interplay with the carrier fluid.
In the framework of the circular economy, spent coffee grounds were converted into powdered activated carbon by means of pyrolysis, using potassium hydroxide as the activating agent. Its adsorption ...capacity on a panel of phenolic compounds was compared with those of two commercial powdered activated carbons, after preliminary studies on organic dyes with different ionic properties, to assess the affinity between adsorbates and adsorbents. Pseudo-first-order and pseudo-second-order kinetic models were carried out, together with Freundlich and Langmuir isotherms. They were useful to calculate the breakthrough at 5%, 10%, and 50% of adsorption and the partition coefficients for the comparison of performance between different sorbent systems in a less biased manner (e.g., reducing bias associated with operational settings like sorbate concentration and sorbents dosage). The results showed that the removal efficiency for SCGs-AC was comparable with that of the commercial activated carbons with the highest partition coefficients for methylene blue (12,455 mg/g/μM, adsorption capacity = 179 mg/g) and 3-chlorophenol (81.53 mg/g/μM, adsorption capacity = 3765 mg/g). The lower efficiency in bromothymol blue and bisphenol-A adsorption was due to its different morphology and surface properties.
PDF
