Nanoporous gold can be exploited as plasmonic material for enhanced spectroscopy both in the visible and in the near infrared spectral regions. In particular, with respect to bulk metal it presents ...interesting optical properties in the infrared where it presents a significantly higher field confinement with respect to conventional materials. This latter can be exploited to achieve extremely high sensitivity to the environment conditions, hence realizing interesting sensors. Here we compare the sensitivity of a plasmonic resonators made of nanoporous gold with a similar structures made of bulk metal. The experimental test of the enhanced sensitivity was performed by depositing the same stoichiometric quantity of dielectric material onto the two considered structures. The result, also confirmed by the biosensing of a short peptide, can be ascribed to the better field confinement and enhancement in porous metal. This suggests an application of nanoporous 3D structures as sensor platform in the near-infrared with sensitivity over 4.000 nm/RIU.
Surface Plasmon Resonance sensors are a well-established class of sensors which includes a very large variety of materials and detection schemes. However, the development of portable devices is still ...challenging as due to the intrinsic complexity of the optical excitation/detection schemes. In this work we show that Nanoporous gold (NPG) films may overcome these limitations by providing excellent sensitivity without the need of sophisticated fabrication approaches and/or optical setup. The sensing mechanism is related the co-localization of optical energy and analytes into the pores that promote an enhanced light-matter coupling. As result, when molecules are adsorbed into the pores, the NPG film shows a significant spectral shift of the effective plasma frequency and then an abrupt change of the reflectivity. By monitoring the reflectivity in the spectral region close to the plasma frequency (namely the plasma edge) is then possible to detect the analyte. Through a set of experiments we demonstrated a sensitivity exceeding 15.000 nm/RIU in the Near Infrared Range that is comparable with the state of the art of plasmonic metamaterials.
We investigate local heat generation by molecules at the apex of polymer-embedded vertical antennas excited at resonant mid-infrared wavelengths, exploiting the surface enhanced infrared absorption ...(SEIRA) effect. The embedding of vertical nanoantennas in a non-absorbing polymer creates thermal isolation between the apical hotspot, the locus of heat generation, and the heat sink represented by the substrate. Vibrational mid-infrared absorption by strongly absorbing molecules located at the antenna apex then generates nanoscale temperature gradients at the surface. We imaged the thermal gradients by using a nano-photothermal expansion microscope, and we found values up to 10 K/microm in conditions where the radiation wavelength resonates with both the molecule vibrations and the plasmonic mode of the antennas. Values up to 1000 K/microm can be foreseen at maximum quantum cascade laser power. The presented system provides a promising thermoplasmonic platform for antenna-assisted thermophoresis and resonant mid-infrared photocatalysis.
A robust and reproducible preparation of self-standing nanoporous gold leaves (NPGL) is presented, with optical characterization and plasmonic behaviour analysis. Nanoporous gold (NPG) layers are ...tipically prepared as thin films on a bulk substrate. Here we present an alternative approach consisting in the preparation of NPGL in the form of a self-standing film. This solution leads to a perfectly symmetric configuration where the metal is immersed in a homogeneous medium and in addition can support the propagation of symmetric and antisymmetric plasmonic modes. With respect to bulk gold, NPG shows metallic behaviour at higher wavelengths, suggesting possible plasmonic applications in the near / medium infrared range. In this work the plasmonic properties in the wide wavelength range from the ultraviolet up to the mid-infrared range have been investigated.
In this work, we show that modulating the fractal dimension of nanoporous gold allows its effective dielectric response to be tailored over a wide spectral range of infrared wavelengths. In ...particular, the plasma edge and effective plasma frequency depend linearly on the fractal dimension, which can be controlled by varying the pore and ligament sizes. Importantly, the fractal porous metal exhibits superior plasmonic properties compared to its bulk counterpart. These properties, combined with a longer skin depth on the order of 100-200 nm, enables the penetration of optical energy deep into the nanopores where molecules can be loaded, thus achieving more effective light-matter coupling. These findings may open new pathways to engineering the optical response of fractal-like or self-similar metamaterials without the need for sophisticated lithographic patterning.
The temperature increase and temperature gradients induced by mid-infrared laser illumination of vertical gold nanoantenna arrays embedded into polymer layers was measured directly with a ...photothermal expansion nanoscope. Nanoscale thermal hotspot images and local temperature increase spectra were both obtained, the latter by broadly tuning the emission wavelength of a quantum cascade laser. The spectral analysis indicates that plasmon-enhanced mid-infrared vibrations of molecules located in the antenna hotspots are responsible for some of the thermoplasmonic resonances, while Joule heating in gold is responsible for the remaining resonances. In particular, plasmonic dark modes with low scattering cross-section mostly produce surface-enhanced infrared absorption (SEIRA), while bright modes with strong radiation coupling produce Joule heating. The dark modes do not modify the molecular absorption lineshape and the related temperature increase is chemically triggered by the presence of molecules with vibrational fingerprints resonant with the plasmonic dark modes. The bright modes, instead, are prone to Fano interference, display an asymmetric molecular absorption lineshape and generate heat also at frequencies far from molecular vibrations, insofar lacking chemical specificity. For focused mid-infrared laser power of 50 mW, the measured nanoscale temperature increases are in the range of 10 K and temperature gradients reach 5 K/\(\mu\)m in the case of dark modes resonating with strong infrared vibrations such as the C=O bond of poly-methylmethacrylate at 1730 cm\(^{-1}\).
Multiphonon anharmonicity in MgO an ionic binary compound Giura, Paola; Paulatto, Lorenzo; He, Fei ...
2019 44th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz),
2019-Sept.
Conference Proceeding
The anharmonic lattice dynamics of MgO has been studied at ambient conditions and at high temperatures by infrared spectroscopy combined with density functional perturbation theory calculations. The ...agreement between the measured phonon energies and widths with ab-initio calculated values provides a direct and pertinent test of the validity of advanced theoretical methods. Long observed anharmonic features in the infrared reflectivity find a clear explanation in terms of well-defined multiphonons scattering processes and lattice dynamics peculiarities, also responsible of a significant and sharp reduction of the longitudinal optical phonon lifetime at critical finite wave vectors. Our work highlights the importance of multi-phonons scattering processes on collective dynamics and related materials properties.
The detection and amplification of molecular absorption lines from a chemical weapons simulant is demonstrated using plasmonic antennas fabricated from n-Ge epitaxially grown on Si. A free-standing ...Si 0.25 Ge 0.75 microbolometer detector with n-Ge plasmonic antenna is demonstrated as an integrated mid-infrared plasmonic sensor.
We report the first preparation of nanoporous Al-Mg alloy films by selective dissolution of Mg from a Mg-rich AlxMg1-x alloy. We show how to tune the stoichiometry, the porosity and the oxide ...contents in the final film by modulating the starting ratio between Al and Mg and the dealloying procedure. The obtained porous metal can be exploited for enhanced UV spectroscopy. In this respect, we experimentally demonstrate its efficacy in enhancing fluorescence and surface Raman scattering for excitation wavelengths of 360 nm and 257 nm respectively. Finally, we numerically show the superior performance of the nanoporous Al-Mg alloy in the UV range when compared to equivalent porous gold structures. The large area to surface ratio provided by this material make it a promising platform for a wide range of applications in UV/deep-UV plasmonics.
The n-type Ge-on-Si epitaxial material platform enables a novel paradigm for plasmonics in the mid-infrared, prompting the future development of lab-on-a-chip and subwavelength vibrational ...spectroscopic sensors. In order to exploit this material, through proper electrodynamic design, it is mandatory to retrieve the dielectric constants of the thin Ge epilayers with high precision due to the difference from bulk Ge crystals. Here we discuss the procedure we have employed to extract the real and imaginary part of the dielectric constants from normal incidence reflectance measurements, by combining the standard multilayer fitting procedure based on the Drude model with Kramers-Kronig transformations of absolute reflectance data in the zero-transmission range of the thin film.
PDF
