Electric fields are commonly used to trap and separate micro- and nanoparticles near channel constrictions in microfluidic devices. The trapping mechanism is attributed to the electrical forces ...arising from the nonhomogeneous electric field caused by the constrictions, and the phenomenon is known as insulator-based-dielectrophoresis (iDEP). In this paper, we describe stationary electroosmotic flows of electrolytes around insulating constrictions induced by low frequency AC electric fields (below 10 kHz). Experimental characterization of the flows is described for two different channel heights (50 and 10 μm), together with numerical simulations based on an electrokinetic model that considers the modification of the local ionic concentration due to surface conductance on charged insulating walls. We term this phenomenon concentration–polarization electroosmosis (CPEO). The observed flow characteristics are in qualitative agreement with the predictions of this model. However, for shallow channels (10 μm), trapping of the particles on both sides of the constrictions is also observed. This particle and fluid behavior could play a major role in iDEP and could be easily misinterpreted as a dielectrophoretic force.
Electrophoresis describes the motion of charged particles suspended in electrolytes when subjected to an external electric field. Previous experiments have shown that particles undergoing ...electrophoresis are repelled from nearby channel walls, contrary to the standard description of electrophoresis that predicts no hydrodynamic repulsion. Dielectrophoretic (DEP) repulsive forces have been commonly invoked as the cause of this wall repulsion. We show that DEP forces can only account for this wall repulsion at high frequencies of applied electric field. In the presence of a low-frequency field, quadrupolar electro-osmotic flows are observed around the particles. We experimentally demonstrate that these hydrodynamic flows are the cause of the widely observed particle-wall interaction. This hydrodynamic wall repulsion should be considered in the design and application of electric-field-driven manipulation of particles in microfluidic devices.
Full text
Available for:
CMK, CTK, FMFMET, NUK, UL
Deterministic Lateral Displacement (DLD) exploits periodic arrays of pillars inside microfluidic channels for high-precision sorting of micro- and nano-particles. Previously we demonstrated how DLD ...separation can be significantly improved by the addition of AC electrokinetic forces, increasing the tunability of the technique and expanding the range of applications. At high frequencies of the electric field (>1 kHz) the behaviour of such systems is dominated by Dielectrophoresis (DEP), whereas at low frequencies the particle behaviour is much richer and more complex. In this article, we present a detailed numerical analysis of the mechanisms governing particle motion in a DLD micropillar array in the presence of a low-frequency AC electric field. We show how a combination of Electrophoresis (EP) and Concentration-Polarisation Electroosmosis (CPEO) driven wall-particle repulsion account for the observed experimental behaviour of particles, and demonstrate how this complete model can predict conditions that lead to electrically induced deviation of particles much smaller than the critical size of the DLD array.
•Low frequency electrokinetics improves Deterministic Lateral Displacement separation.•CPEO driven wall-repulsion plays a major role in this mechanism.•Combination of Electrophoresis and CPEO fully explains the low frequency separation.•The mechanism of Electrokinetic biased DLD separation has been fully characterized.•This model enables numerical optimization of future electrokinetic DLD devices.
We experimentally demonstrate quadrupolar electro-osmotic flows around charged dielectric microspheres immersed in an electrolyte when subjected to an alternating current electric field. We present ...an electrokinetic model that predicts the flow characteristics based on the phenomena of surface conductance and polarization of the electrolyte concentration around the particles. We refer to these flows as concentration polarization electro-osmosis. We anticipate that these flows may play a major role in the electric-field-induced assembly of colloids and on the electrokinetic manipulation of dielectric micro- and nanoparticles.
We describe a user-friendly, open source software for single-particle detection/counting in a continuous-flow. The tool automatically processes video images of particles, including pre-conditioning, ...followed by size-based discrimination for independent detection of fluorescent and non-fluorescent particles of different sizes. This is done by interactive tuning of a reduced set of parameters that can be checked with a robust, real-time quality control of the original video files. The software provides a concentration distribution of the particles in the transverse direction of the fluid flow. The software is a versatile tool for many microfluidic applications and does not require expertise in image analysis.
We describe an improved method for determining the electroosmotic mobility and zeta potential of surfaces based on a current‐monitoring method. This technique eliminates the requirement for ...measurements of channel dimensions and sample conductivities, leading to a simple high precision measurement. The zeta potential of PDMS is measured for native surfaces and surfaces treated with a nonionic surfactant in low‐conductivity electrolytes.
We describe a novel particle separation technique that combines deterministic lateral displacement (DLD) with orthogonal electrokinetic forces. DLD is a microfluidic technique for continuous flow ...particle separation based on size. We describe new tunable devices that use a combination of AC electric fields with DLD to separate particles below the critical diameter. Planar electrodes were integrated into a classical DLD device to produce a force orthogonal to the fluid flow direction. Experiments with 3.0 μm, 1.0 μm and 500 nm diameter microspheres show that at low frequencies (up to 500 Hz) particles oscillate in the direction of the field due to electrophoretic (EP)/electroosmotic (EO) forces. As the frequency of the field increases, the amplitude of these oscillations vanishes and, eventually dielectrophoresis (DEP) becomes the dominant electrokinetic force on the particles (DEP arises from electric field inhomogeneities caused by the presence of the DLD posts). Both mechanisms alter the paths of the particles inside the DLD devices leading to enhanced sorting of particles below the critical diameter of the device.
We describe a novel particle separation technique that combines deterministic lateral displacement (DLD) with orthogonal electrokinetic forces to separate particles below the critical diameter.
Reliable in-vitro digestion models that are able to successfully replicate the conditions found in the human gastrointestinal tract are key to assess the fate and efficiency of new formulations aimed ...for oral consumption. However, current in-vitro models either lack the capability to replicate crucial dynamics of digestion or require large volumes of sample/reagents, which can be scarce when working with nanomaterials under development. Here, we propose a miniaturised digestion system, a digestion-chip, based on incubation chambers integrated on a polymethylmethacrylate device. The digestion-chip incorporates key dynamic features of human digestion, such as gradual acidification and gradual addition of enzymes and simulated fluids in the gastric phase, and controlled gastric emptying, while maintaining low complexity and using small volumes of sample and reagents. In addition, the new approach integrates real-time automated closed-loop control of two key parameters, pH and temperature, during the two main phases of digestion (gastric and intestinal) with an accuracy down to ± 0.1 °C and ± 0.2 pH points. The experimental results demonstrate that the digestion-chip successfully replicates the gold standard static digestion INFOGEST protocol and that the semi-dynamic digestion kinetics can be reliably fitted to a first kinetic order model. These devices can be easily adapted to dynamic features in an automated, sensorised, and inexpensive platform and will enable reliable, low-cost and efficient assessment of the bioaccessibility of new and expensive drugs, bioactive ingredients or nanoengineered materials aimed for oral consumption, thereby avoiding unnecessary animal testing.
Polydimethylsiloxane (PDMS) is ubiquitously used in microfluidics. However, PDMS is porous and hydrophobic, potentially leading to small molecule partitioning. Although many studies addressed this ...issue and suggested surface/bulk modifications to overcome it, most were not quantitative, did not address which variables besides hydrophobicity governed molecule absorption, and no modification has been shown to completely obviate it. We evaluated qualitatively (confocal microscopy) and quantitatively (fluorescence spectroscopy) the effects of solute/solvent pairings, concentration, and residence time on molecule partitioning into PDMS. Additionally, we tested previously reported surface/bulk modifications, aiming to determine whether reduced PDMS hydrophobicity was stable and hindered molecule partitioning. Partitioning was more significant at lower concentrations, with the relative concentration of rhodamine-B at 20 µM remaining around 90% vs. 10% at 1 µM. Solute/solvent pairings were demonstrated to be determinant by the dramatically higher partitioning of Nile-red in a PBS-based solvent as opposed to ethanol. A paraffin coating slightly decreased the partitioning of Nile-red, and a sol-gel modification hindered the rhodamine-B diffusion into the PDMS bulk. However, there was no direct correlation between reduced surface hydrophobicity and molecule partitioning. This work highlighted the need for pre-assessing the absorption of test molecules into the microfluidic substrates and considering alternative materials for fabrication.