An overview of the recent operations and the main results of cesium injection in the Source for the Production of Ions of Deuterium Extracted from Rf plasma (SPIDER) negative ion source are described ...in this contribution. In experiments without cesium injection, all SPIDER plants were tested to verify the basic expectations on the operational parameters (e.g., electron cooling effectiveness of magnetic filter field) and to determine its operational region. For beam properties, it was shown that the current density varies across the beam in the vertical direction. In preliminary cesium experiments, the expected increase of negative ion current and simultaneous decrease of co-extracted electrons were found, along with the influence of the control parameters (polarization of the plasma electrodes, magnetic filter field) on the SPIDER beam uniformity in the horizontal and vertical directions. It was shown that non-Gaussian tails can be identified in the angular distribution on the plane perpendicular to the beam propagation direction. Stray particles, nonhomogeneous beam and large divergence might result in unexpected heat and particle loads over ITER neutral beam injector (NBI) accelerator grids; it is the goal of SPIDER to assess and possibly to identify suitable methods for controlling these beam features. A major shutdown, planned for late 2021, to solve the issues identified during the operation and to carry out scheduled modifications, is outlined. Such improvements are expected to allow SPIDER to pursue the ITER requirements in terms of negative ion current, electron-to-ion ratio, and beam duration.
Determining the epidemiology of dementia among the population as a whole in specific jurisdictions - including the long-term care population-is essential to providing appropriate care. The objectives ...of this study were to use linked administrative databases in the province of Saskatchewan to determine the 12-month incidence and prevalence of dementia for the 2012/13 period (1) among individuals aged 45 and older in the province of Saskatchewan, (2) according to age group and sex, and (3) according to diagnosis code and other case definition criteria.
We used a population-based retrospective cohort study design and extracted data from 10 provincial health databases linked by a unique health services number. The cohort included individuals 45 years and older at first identification of dementia between April 1, 2001 and March 31, 2013 based on case definitions met within any one of four administrative health databases (Hospital Discharge Abstracts, Physician Service Claims, Prescription Drug, and RAI-MDS, i.e., Long-term Care).
A total of 3,270 incident cases of dementia (7.28 per 1,000 PAR) and 13,012 prevalent cases (28.16 per 1,000 PAR) were identified during 2012/13. This study found the incidence rate increased by 2.8 to 5.1 times and the prevalence rate increased by 2.6 to 4.6 times every 10 years after 45 years of age. Overall, the age-standardised incidence rate was significantly lower among females than males (7.04 vs. 7.65 per 1,000 PAR) and the age-standardised prevalence rate was significantly higher among females than males (28.92 vs. 26.53 per 1,000 PAR). Over one-quarter (28 %) of all incident cases were admitted to long-term care before a diagnosis was formally recorded in physician or hospital data, and nearly two-thirds of these cases were identified at admission with impairment at the moderate to very severe level or a disease category of Alzheimer's disease/other dementia.
Linking multiple sources of registry data contributes to our understanding of the epidemiology of dementia across multiple segments of the population, inclusive of individuals residing in long-term care. This information is foundational for public awareness and policy recommendations, health promotion and prevention strategies, appropriate health resource planning, and research priorities.
Medico-legal conflicts arise when it is difficult to prove the cause of nosocomial infections.
To report an outbreak of patient-to-patient transmission of hepatitis C virus (HCV) through the repeated ...use of a multi-dose saline flask during the rinsing of central venous catheters.
Blood samples were taken from each patient for the comparative analysis of their HCV RNA strains. No samples were available for one patient who died before the investigation started. Despite the known lability of HCV RNA, the body was exhumed four months after burial and postmortem samples were collected. HCV RNA was extracted successfully from liver and spleen samples. Genotyping of all the HCV strains was performed by sequence analysis of the 5′NC untranslated region, the E1 core conserved region and the E1/E2 hypervariable region.
Forensic investigators retraced the route used by two ward nurses, when saline catheter flushes were given to 14 patients with each nurse administering to seven patients. The comparative phylogenetic analysis of all case strains identified the deceased patient as the source of contamination to five patients.
This study highlights the value of sequence analysis as a tool for solving medico-legal conflicts. The High Court of Justice found that a health worker's re-use of a contaminated needle resulted in the nosocomial transmission of HCV.
•SPIDER Beam Source manufacturing and assembly completed in October 2017.•Visual inspection, pressure/leak tests, electric and magnetic tests performed on site.•Some issues were discovered and fixed, ...on site.•The installation of the Beam Source inside the vessel was completed in February’18.•Final tests after installation were passed, commissioning started in May’18.
The SPIDER Beam Source (BS), the first prototype of a full scale ion source for the ITER Heating Neutral Beam injector, was delivered to the Neutral Beam Test Facility (NBTF) site in Padova (Italy) after about five years procurement phase.
A huge effort was devoted during the procurement for quality controls and testing at the supplier’s workshops. Several activities were also carried out on NBTF site for verification/adjustment of interfaces, solution of still open issues, as well as final tests before and after installation inside the vacuum vessel.
The NBTF Team undertook the BS site acceptance tests including: pressure and leak tests of the hydraulic circuits; electrical tests; measurement of magnetic field profiles; functionality tests of diagnostics installed on the BS; checks of grids alignment by means of laser tracker.
Accurate positioning of the BS inside the vacuum vessel was performed and various service lines were connected in a tight space. Several improvements were undertaken in order to guarantee reliability and reduce the risks during the commissioning and experimental campaign in 2018.
After installation, the integrated commissioning phase was initiated, powering the RF and high voltage circuits, followed by the first operation in vacuum.
ITER envisages the use of two heating neutral beam injectors plus an optional one as part of the auxiliary heating and current drive system, to reach the desired performances during its various ...phases of operation. The 16.5 MW expected neutral beam power per injector is several notches higher than worldwide existing facilities.
In order to enable such development, a Neutral Beam Test Facility (NBTF) was established at Consorzio RFX, exploiting the synergy of two test beds, called SPIDER and MITICA. SPIDER is dedicated developing and characterizing large efficient negative ion sources at relevant parameters in ITER-like conditions: source and accelerator located in the same vacuum where the beam propagates, immunity to electromagnetic interferences of multiple radio-frequency (RF) antennas, avoidance of RF-induced discharges on the outside of the source. Three years of experiments on SPIDER have addressed to the necessary design modifications to enable full performances. The source is presently under a long shut-down phase to incorporate learnings from the experimental campaign, in particular events/issues occurred during operation, which led to the identification of improvement opportunities/necessities (e.g. RF discharges, local burns, water leaks, other damages, configuration/design upgrades to maximize chances/margin to quest target parameters).
Parallelly, developments on MITICA, the full-scale prototype of the ITER Neutral Beam Injector (NBI) featuring a 1 MV accelerator and ion neutralization, are underway including manufacturing of the beam source, accelerator and the beam line components, while power supplies and auxiliary plants, already installed, are under final testing and commissioning.
Integration, commissioning and tests of the 1 MV power supplies are essential for this first-of-kind system, unparalleled both in research and industry field. 1.2 MV dc insulating tests of high voltage components were successfully completed. The integrated test to confirm 1 MV output by combining invertor systems, DC generators and transmission lines extracted errors/accidents in some components. To realize a concrete system for ITER, said events have been addressed and solutions for the repair and the improvement of the system were developed.
Hence, NBTF is emerging as a necessary facility, due to the large gap with existing injectors, effectively dedicated to identify issues and find solutions to enable successful ITER NBI operations in a time bound fashion. The lessons learned during the implementation on NBTF and future perspectives are here discussed.
Anthracnose of tomato (Lycopersicon esculentum Mill. var. pyriforme (Dunal) L.H. Bailey) was observed on ripe fruits of pear-shaped tomato in the postharvest phase during September 1998 to February ...1999. Anthracnose causes a rot of ripe fruit that can cause significant losses in the field and during storage. Symptoms occurred on fruits of several cultivars grown in commercial fields at La Plata, Buenos Aires Province, Argentina. Fruit rot began as small, round (1 to 2 mm diameter), grayish, sunken, watersoaked lesions. The center of the spots became tan and flecked with small black specks. Individual spots enlarged concentrically to approximately 2 cm in diameter and became covered with numerous, submerged, black acervuli that formed in concentric rings and, under wet conditions, produced a mass of slimy salmon-colored spores. In time, total fruit rot often occurred due to coalescence of multiple lesions. Symptoms developed during storage, resulting in diminished fruit quality and marketable value. Colletotrichum dematium (Pers.) Grove was isolated consistently by plating surface-disinfected lesion margins on acidified potato dextrose agar (PDA). Colonies on PDA were gray, olivaceous to black, with abundant acervuli. Conidia were one-celled, hyaline, and falcate, with acute apices measuring 17 to 28 × 2 to 4 μm, consistent with the description of C. dematium (1). Acervuli were superficial, black, and setose. A fungal isolate was selected to complete Koch's postulates. Surface-disinfected ripe fruits of tomato cvs. Perita and Larga Vida were punctured with a sterile needle containing conidia from sporulating cultures. Inoculated fruits were incubated at 25°C for 48 h in a moist chamber. After 3 to 5 days, soft, watery spots developed at the inoculation point on the fruit, and C. dematium was reisolated from the lesions. Fruits that were punctured but not inoculated did not develop symptoms or yield C. dematium. To confirm pathogenicity on leaves, disease-free tomato plants were sprayed with a conidial suspension (2 × 10
spores per ml) of the pathogen. Control plants were sprayed with sterile water. Inoculated plants and controls were left bagged for 48 h and placed in a greenhouse at 20 to 25°C. After 1 week, necrotic leaf spots developed on inoculated plants. Leaf spots were small, circular, and brown. Yellow rings often surrounded the spots. C. dematium was reisolated from lesions on these leaves. This is the first report of C. dematium on tomato in Argentina. Reference: (1) B. C. Sutton. 1980. The Coelomycetes: Fungi Imperfecti with Pycnidia, Acervuli and Stromata. Commonwealth Mycological Institute, Kew, England.
PDF
