Aim
To evaluate the characteristic artefact patterns associated with teeth root filled with Gutta‐percha when scanned with four cone‐beam CT devices.
Methodology
Whilst using soft tissue simulation, ...ten root filled human premolars were placed in empty sockets in a dry human skull. Subsequently, the skull was scanned using 3D Accuitomo 170®, WhiteFox®, Cranex 3D® and Scanora 3D® following clinical protocols with the highest resolution and artefact reduction. After proper image registration in OnDemand3D® software (Cybermed, Seoul, Korea), each image slice was evaluated by three trained and calibrated dentomaxillofacial radiologists, which scored absence (0) and presence (1) of cupping artefact, hypodense halos and streak artefacts. Kappa test was performed for intra‐ and interobserver agreement.
Results
A moderate to perfect agreement for each observer (intra‐observer κ = 0.5–1.0) was found. Agreement between the different observers was moderate to almost perfect for the different artefact patterns (interobserver κ = 0.55–0.9). Cupping artefact was the most prevalent (70%), followed by a hypodense halo (35%) and streak artefacts (16%). The Chi‐squared test revealed significantly more streaks in axial slices (P < 0.0001), with some CBCT systems yielding significantly inferior results to others (P < 0.05). The dedicated EndoMode and artefact reduction did not improve the result significantly.
Conclusions
The variation of artefact expression was significantly different amongst CBCT machines for root filled teeth. Continuous efforts are needed to improve CBCT reconstruction algorithms, with a specific focus on reducing artefacts induced by dense dental materials, whilst striving for enhanced image quality at low‐radiation doses.
Aim
To compare the anaesthetic efficacy of inferior alveolar nerve blocks (IANB) with 1.8 mL of 2% lidocaine (LI) to a buccal infiltration (BI) with 1.8 mL of 4% articaine (AR), both with 1 : 100 000 ...epinephrine, in patients with symptomatic irreversible pulpits in a randomized controlled trial.
Methodology
Volunteers presenting at the Emergency Centre (FOP‐UNICAMP) were randomly divided into two groups (30 for AR and 20 for LI). Operator and patient were not blinded. Success was recorded when complete pain‐free treatment was achieved after a single injection (IANB or BI) or when one supplemental injection was needed for emergency endodontic procedures. Success rate of supplemental injection was evaluated between and within groups using Fisher's exact test and chi‐square test.
Results
A higher success rate (P = 0.03/Fisher's exact test) was observed with AR (40%) than with LI (10%). No significant difference was found when a single injection plus one supplemental injection was compared between groups (P = 1.0; AR = 70%; LI = 80%). However, supplemental injection increased the anaesthetic success rates (AR, P = 0.04; LI, P = 0.0001) within groups.
Conclusions
Single anaesthesia techniques (IANB or BI) were not able to achieve pain‐free emergency endodontic treatment. Supplemental anaesthetic techniques should be considered prior to treatment procedures in order to increase success rate (consort: registration number – NCT01912755/Fapesp: #2009/10834‐4).
To investigate the effect of tube current-exposure time (mAs) reduction on clinical and technical image quality for different CBCT scanners, and to determine preliminary minimally acceptable values ...for the mAs and contrast-to-noise ratio (CNR) in CBCT.
A polymethyl methacrylate (PMMA) phantom and an anthropomorphic skull phantom, containing a human skeleton embedded in polyurethane, were scanned using four CBCT devices, including seven exposure protocols. For all protocols, the mAs was varied within the selectable range. Using the PMMA phantom, the CNRAIR was measured and corrected for voxel size. Eight axial slices and one coronal slice showing various anatomical landmarks were selected for each CBCT scan of the skull phantom. The slices were presented to six dentomaxillofacial radiologists, providing scores for various anatomical and diagnostic parameters.
A hyperbolic relationship was seen between CNRAIR and mAs. Similarly, a gradual reduction in clinical image quality was seen at lower mAs values; however, for several protocols, image quality remained acceptable for a moderate or large mAs reduction compared with the standard exposure setting, depending on the clinical application. The relationship between mAs, CNRAIR and observer scores was different for each CBCT device. Minimally acceptable values for mAs were between 9 and 70, depending on the criterion and clinical application.
Although noise increased at a lower mAs, clinical image quality often remained acceptable at exposure levels below the manufacturer's recommended setting, for certain patient groups. Currently, it is not possible to determine minimally acceptable values for image quality that are applicable to multiple CBCT models.
The aim of this study was to assess the reliability of four panoramic radiographic findings, both individually and in association, in predicting the absence of corticalization between the mandibular ...canal and the third molar on cone beam CT (CBCT) images.
The sample consisted of 72 individuals (142 mandibular third molars) who underwent pre-operative radiographic evaluation before extraction of impacted mandibular third molars. On panoramic radiographs, the most common signs of corticalization (darkening of roots, diversion of mandibular canal, narrowing of mandibular canal and interruption of white line) and the presence or absence of corticalization between the mandibular third molar and the mandibular canal on CBCT images were evaluated.
Darkening of roots and interruption of white line associated with the absence of corticalization between the mandibular third molar and the mandibular canal on CBCT images were statistically significant, both as isolated findings (p = 0.0001 and p = 0.0006, respectively) and in association (p = 0.002). No statistically significant association was observed for the other panoramic radiographic findings, either individually or in association (p > 0.05).
Darkening of roots and interruption of white line observed on panoramic radiographs, both as isolated findings and in association, were effective in determining the risk relationship between the tooth roots and the mandibular canal, requiring three-dimensional evaluation of the case.
The aim of this study was to evaluate whether a correlation exists between temporal bone pneumatization and the morphology of the articular eminence and glenoid fossa. A sample of 100 cone beam ...computed tomography scans was used, for a total of 200 temporomandibular joints (TMJ). Paracoronal and parasagittal images of the TMJ were evaluated by two examiners. For all TMJ, pneumatization was classified in the mid-lateral direction using a score of 0 or 1, and in the anteroposterior direction using a score ranging from 0 to 3. The inclination and height of the articular eminence and the thickness of the roof of the glenoid fossa were obtained. Pneumatization was found in the mid-lateral direction in 83.5% of the cases and in the anteroposterior direction in 88%. The age of the patient and side did not influence the prevalence or degree of pneumatization (P=0.051–0.953), but female patients showed more pneumatization in the mid-lateral direction than male patients (P=0.014). The presence of pneumatization did not affect articular eminence and mandibular fossa morphology. It is concluded that the presence and extent of pneumatization of the TMJ temporal component does not affect its morphology. However, professionals should be aware of the high prevalence of pneumatization and take this into account when performing TMJ assessment.
Neves FS, Vasconcelos TV, Vaz SLA, Freitas DQ, Haiter‐Neto F. Evaluation of reconstructed images with different voxel sizes of acquisition in the diagnosis of simulated external root resorption using ...cone beam computed tomography. International Endodontic Journal, 45, 234–239, 2012.
Aim To evaluate the diagnosis of simulated external root resorption in cone beam computed tomography (CBCT) images acquired with different voxel sizes, then reconstructed with the same voxel size.
Methodology Buccal, mesial and distal root surfaces of twenty single‐rooted premolar teeth were evaluated for the presence or absence of simulated resorption defects. Images were obtained using a Classic i‐CAT CBCT unit with two different voxel sizes (0.25 and 0.30 mm). Then all images were reconstructed to 0.25 mm voxel size. The McNemar’s test was applied to evaluate the agreement between the two protocols (different voxel sizes/reconstruction parameters) with the gold standard (defects created in the root). Accuracy, sensitivity, specificity, positive and negative predictive values were calculated for each voxel and defect sizes.
Results Better sensitivity and accuracy were obtained with 0.25 (0.25 mm) voxel size. Specificity, positive and negative predictive values were highest with the 0.25 (0.30 mm) voxel size. McNemar’s test results revealed significant differences between the protocols with the gold standard (P < 0.0001). The results revealed that as the cavity size increased, sensitivity, accuracy, positive and negative predictive values also increased. When correlating the voxel size and root third, better sensitivity, accuracy, positive and negative predictive values were obtained in the middle third.
Conclusions In the diagnosis of simulated external root resorption with the Classic i‐CAT CBCT unit, images acquired with 0.30 mm voxel size and reconstructed with 0.25 mm voxel size provided the best protocol with a lower radiation dose than the 0.25 mm voxel size.
This study established cone beam computed tomography (CBCT)-based cephalometric norms for Brazilian adults, including the assessment of sexual dimorphism. An observer performed McNamara’s ...cephalometric analysis twice on 60 CBCT datasets acquired from patients with a normal dental occlusion, divided equally into two groups by sex. Welch’s t-test was applied to assess differences between the sexes in hard tissue cephalometric measurements, and Dahlberg’s formula was used to calculate measurement error introduced by the observer. The cephalometric measurements of effective mandibular length, effective midfacial length, maxillomandibular differential, and lower anterior facial height presented sexual dimorphism. Linear measurements had error ≤0.78mm, and angular measurements had error ≤1.24°. The results show that (1) the CBCT-based cephalometric norms established in this study are reliable for use by researchers and clinicians, and (2) Brazilian adult males and females have similar craniofacial morphology, with males possessing larger jaws than females.
To evaluate the effect on diagnostic yield in the detection of experimentally induced vertical root fractures on cone beam CT images using four dental software program.
190 single-rooted extracted ...human teeth were divided into three groups according to the pulp canal status: unrestored (UR), filled with gutta-percha (GP) and restored with a metallic custom post (Post). One-half of the sample of each group was artificially fractured and the segments repositioned. All teeth were scanned on a cone beam CT device at 0.2 mm nominal voxel resolution (i-CAT Platinum; Imaging Sciences International, Hatfield, PA). The data were exported as digital imaging and communications in medicine files and imported into Dolphin Imaging & Management Solutions, v. 11.5 (Patterson Dental Supply Inc., St Paul, MN), InVivoDental, v. 5.0 (Anatomage Inc., San Jose, CA) and Kodak Dental Imaging Software 3D module, v. 2.1.11 (Carestream Health Inc., Rochester, NY) software. Cross-sectional images in the acquisition (using Xoran CAT™, v. 3.0.34 software; Xoran Technologies, Ann Arbor, MI) and additional software were presented to three calibrated oral radiologists who rated the presence or absence of root fracture on a five-point scale. Receiver operating characteristic analysis was performed, and treatment comparisons compared by analysis of variance and pairwise comparisons were performed using Tukey's test at an a priori value of α < 0.05%.
All dental software performed equally at detecting fractures. Fractures were significantly more difficult to detect when posts were present.
The diagnosis of root fracture is software-independent. The presence of an intracanal metallic post significantly decreases the detection of artificially created root fractures.
The aim was to compare the caries diagnostic accuracy of two cone beam CT systems (CBCT) with two intraoral receptors, one digital and one film.
100 non-cavitated extracted human teeth were placed ...with approximal contacts: each row of teeth comprised 1 canine, 1 first and second premolar, and 1 first and second molar. Radiographs of each tooth were recorded using two intraoral modalities: Digora-fmx (Soredex) and film (Kodak Insight), and two CBCT systems: NewTom 3G (Quantitative Radiology) in three fields of view (FOVs): pixel size of 0.36 mm (FOV 12 inches), pixel size of 0.25 mm (FOV 9 inches), pixel size of 0.16 mm (FOV 6 inches); and 3DX Accuitomo (Morita), pixel size of 0.125 (FOV 4 cm). The volumetric data from the CBCT systems were reconstructed and sectioned (0.5 mm) in the mesiodistal tooth plane. Six observers scored approximal and occlusal surfaces for the detection of caries lesions. The teeth were clinically sectioned and microscopy served as the validation tool. Two-way ANOVA tested differences in sensitivity, specificity and overall true score (true positives plus true negatives) between the modalities.
Microscopy of approximal surfaces found 63% sound, 31% enamel and 6% dentin lesions; of occlusal surfaces, 6% sound, 59% enamel, 19% dentin lesions and 16% had fillings. For approximal surfaces, NewTom 12 inch and 9 inch images had significantly lower sensitivities than Accuitomo (P < 0.02); and NewTom 9 inch and 6 inch had significantly lower specificities than film and Digora-fmx (P < 0.04). Accuitomo images were not significantly different from film or Digora-fmx images for any of the tested variables (P > 0.2). For occlusal surfaces, the Accuitomo presented a higher sensitivity than the other systems. Specificity and overall true score did not differ (P > 0.06) among the modalities.
In conclusion, the NewTom 3G CBCT had a lower diagnostic accuracy for detection of caries lesions than intraoral modalities and the 3DX Accuitomo CBCT. The Accuitomo CBCT had a higher sensitivity than the intraoral systems for detection of lesions in dentin, but the overall true score was not higher.
Dose optimisation has been revisited in the literature due to the frequent use of cone beam computed tomography (CBCT). Although the reduction of the field-of-view (FOV) size has shown to be an ...effective strategy, this indirectly increases the negative effect from the exomass. The aim of this study was to evaluate the diagnostic accuracy of an optimised CBCT protocol in the detection of simulated vertical root fracture (VRF) in the presence of metal in the exomass and/or inside the FOV. Twenty teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in a human mandible covered with a soft tissue equivalent material, metallic materials were placed at different dispositions in the exomass and/or endomass, and CBCT scans were obtained at two dose protocols: standard and optimised. Five radiologists evaluated the images and indicated the presence of VRF using a 5-point scale. Area under the ROC curve (AUC), sensitivity, and specificity were calculated and compared using ANOVA (α = 0.05). Overall, AUC, sensitivity, and specificity did not differ significantly (p > 0.05) between the dose protocols. In conclusion, optimised dose protocols should be considered in the detection of simulated VRF irrespective of the occurrence of artefacts from metallic materials in the exomass and/or inside the FOV.