Surface roughness affects many properties of colloids, from depletion and capillary interactions to their dispersibility and use as emulsion stabilizers. It also impacts particle–particle frictional ...contacts, which have recently emerged as being responsible for the discontinuous shear thickening (DST) of dense suspensions. Tribological properties of these contacts have been rarely experimentally accessed, especially for nonspherical particles. Here, we systematically tackle the effect of nanoscale surface roughness by producing a library of all-silica, raspberry-like colloids and linking their rheology to their tribology. Rougher surfaces lead to a significant anticipation of DST onset, in terms of both shear rate and solid loading. Strikingly, they also eliminate continuous thickening. DST is here due to the interlocking of asperities, which we have identified as “stick–slip” frictional contacts by measuring the sliding of the same particles via lateral force microscopy (LFM). Direct measurements of particle–particle friction therefore highlight the value of an engineering-tribology approach to tuning the thickening of suspensions.
Dense suspensions of colloidal or granular particles can display pronounced non-Newtonian behaviour, such as discontinuous shear thickening and shear jamming. The essential contribution of particle ...surface roughness and adhesive forces confirms that stress-activated frictional contacts can play a key role in these phenomena. Here, by employing a system of microparticles coated by responsive polymers, we report experimental evidence that the relative contributions of friction, adhesion, and surface roughness can be tuned in situ as a function of temperature. Modifying temperature during shear therefore allows contact conditions to be regulated, and discontinuous shear thickening to be switched on and off on demand. The macroscopic rheological response follows the dictates of independent single-particle characterization of adhesive and tribological properties, obtained by colloidal-probe atomic force microscopy. Our findings identify additional routes for the design of smart non-Newtonian fluids and open a way to more directly connect experiments to computational models of sheared suspensions.
Active matter systems feature the ability to form collective patterns as observed in a plethora of living systems, from schools of fish to swimming bacteria. While many of these systems move in a ...wide, three-dimensional environment, several biological systems are confined by a curved topology. The role played by a non-Euclidean geometry on the self-organization of active systems is not yet fully understood, and few experimental systems are available to study it. Here, we introduce an experimental setup in which actin filaments glide on the inner surface of a spherical lipid vesicle, thus embedding them in a curved geometry. We show that filaments self-assemble into polar, elongated structures and that, when these match the size of the spherical geometry, both confinement and topological constraints become relevant for the emergent patterns, leading to the formation of polar vortices and jammed states. These results experimentally demonstrate that activity-induced complex patterns can be shaped by spherical confinement and topology.
Control over the surface roughness of colloidal particles offers exciting opportunities to tailor the properties and the processing of a broad range of soft matter systems. Moreover, identifying ...surface roughness as a design parameter reveals the possibility to connect seemingly distinct phenomena and materials via the role played by roughness effects. In this feature article, we concisely review some approaches to synthesize and characterize rough colloidal particles, with a focus on model spherical colloids. We then discuss the impact that surface roughness has on both the high-shear rheology of dense suspensions and the stabilization of Pickering emulsions. Commenting on developments of our own research, we aim to offer an original perspective for a property-oriented development of colloidal particles that transcends classical divisions between materials and processes toward innovative solutions.
Surface roughness is an important design parameter to influence the processing of particle-based materials. Current methods to synthesize rough particles present some limitations,
e.g
. low yield, ...relative methodological complexity, requirements of multiple steps, or poor roughness control. Here, we thoroughly investigate a facile synthesis route where two silanes, tetraethyl orthosilicate (TEOS) and vinyltrimethoxysilane (VTMS), are added in one pot to form silica particles with controlled corrugated surfaces. We first show that the morphology of these particles can be defined by regulating the amount and ratio of the two silane precursors and by adjusting the concentration of ammonia during synthesis. We characterize the surface topography of the particles using atomic force microscopy and show a direct correlation between surface roughness and the synthesis conditions. Furthermore, we carry out an
in situ
observation of the evolution of surface morphology and propose a mechanism for surface structuring that hinges on the formation of silane droplets, followed by the preferential hydrolysis/condensation reaction of VTMS starting from the droplet surface and evolving towards the center. The exchange of liquid from the droplets through the VTMS shell leads to stress accumulation and wrinkling/buckling of the particles. Moreover, we explicitly show that osmotic imbalances between the inside and the outside of the droplets regulate their shrinking. We therefore demonstrate that exchanging solvents has a comparable impact to adjusting silane and ammonia content in defining the particle shape and that this synthesis route is highly dynamical. Finally, we demonstrate that it is possible to incorporate fluorescent dyes during synthesis to enable future studies on the impact of surface roughness on dynamic processes, including shear,
via
direct high-resolution imaging. Our findings show that the mechanism for wrinkling and buckling in colloidal silica particles follows a general scheme found in a broad range of systems, from liposomes and polymeric capsules to Pickering emulsion droplets.
The shaping of the surface of silica particles obtained from the reaction of two silane precursors is highly dynamical and affects the final particle roughness.
Fabrication of rough colloids by heteroaggregation Zanini, Michele; Hsu, Chiao-Peng; Magrini, Tommaso ...
Colloids and surfaces. A, Physicochemical and engineering aspects,
11/2017, Volume:
532
Journal Article
Peer reviewed
Open access
Display omitted
•Fabrication of model rough colloids.•All-silica model rough colloids with controlled surface chemistry and morphology.•Rough colloids with soft and responsive asperities.•Rigorous ...criterion for an accurate surface roughness analysis.
Colloidal particles are normally considered to be topographically smooth and chemically uniform (down to the nanoscale). Nevertheless, surface heterogeneities do exist and have a strong impact on the particles’ behaviour, especially at interfaces. Surface properties for instance define the wetting of colloids, a process not only of fundamental interest, but also highly relevant for applications, e.g. in the Pickering stabilization of emulsions and foams. In particular, the effect of surface roughness has recently gained increasing interest due to the potential of rough particles to stabilize emulsions and foams more effectively, as well as from a more fundamental point of view in relation to the generation of capillary forces useful for particle assembly. In this work, we present a synthetic pathway for the fabrication of all-silica model rough particles with tuneable and controlled surface roughness and surface chemistry over a broad size range. Additionally, the fabrication of raspberry-like particles with soft asperities is proposed. These experiments have the aim to provide clear, robust and straightforward approaches to realise model systems for the investigation of particle surface roughness-related issues in soft matter.
When concentrated particle suspensions flow into a constricting channel, the suspended particles may either smoothly flow through the constriction or jam and clog the channel. These clogging events ...are typically detrimental to technological processes, such as in the printing of dense pastes or in filtration, but can also be exploited in micro-separation applications. Many studies have to date focused on important parameters influencing the occurrence of clogs, such as flow velocity, particle concentration, and channel geometry. However, the investigation of the role played by the particle surface properties has surprisingly received little attention so far. Here, we study the effect of surface roughness on the clogging of suspensions of silica particles under pressure-driven flows along a microchannel presenting a constriction. We synthesize micron-sized particles with uniform surface chemistry and tunable roughness and determine the occurrence of clogging events as a function of velocity and volume fraction for a given surface topography. Our results show that there is a clear correlation between surface roughness and flow rate, indicating that rougher particles are more likely to jam at the constriction for slower flows. These findings identify surface roughness as an essential parameter to consider in the formulation of particulate suspensions for applications where clogging plays an important role.
Surface roughness plays a key role in the clogging of dense suspensions.
Integrin adhesion complexes are essential membrane-associated cellular compartments for metazoan life. The formation of initial integrin adhesion complexes is a dynamic process involving focal ...adhesion proteins assembled at the integrin cytoplasmic tails and the inner leaflet of the plasma membrane. The weak multivalent protein interactions within the complex and with the plasma membrane suggest that liquid-liquid phase separation could play a role in the nascent adhesion assembly. Here, we report that solid-supported lipid membranes supplemented with phosphoinositides induce the phase separation of minimal integrin adhesion condensates composed of integrin
1 tails, kindlin, talin, paxillin, and FAK at physiological ionic strengths and protein concentrations. We show that the presence of phosphoinositides is key to enriching kindlin and talin on the lipid membrane, which is necessary to further induce the phase separation of paxillin and FAK at the membrane. Our data demonstrate that lipid membrane surfaces set the local solvent conditions for steering the membrane-localized phase separation even in a regime where no condensate formation of proteins occurs in bulk solution.
The collective properties of colloidal suspensions, including their rheology, reflect an interplay between colloidal and hydrodynamic forces. The surface characteristics of the particles play a ...crucial role, in particular, for applications in which interparticle distances become small, i.e., at high concentrations or in aggregates. In this Letter, we directly investigate this interplay via the linear viscoelastic response of the suspensions in the high-frequency regime, using particles with controlled surface topographies, ranging from smooth to hairy and rough particles. We focus directly on the stresses at the particle level and reveal a strong impact of the surface topography on the short-range interactions, both dissipative and elastic. As the particle topography becomes more complex, the local stresses depend on how the topography is generated. The findings in this Letter, in particular, show how changes in topography can both screen or enhance the dissipation, which can be used to engineer the properties of dense or aggregated suspensions.
Full text
Available for:
CMK, CTK, FMFMET, NUK, UL
We investigated the near-wall Brownian dynamics of different types of colloidal particles with a typical size in the 100 nm range using evanescent wave dynamic light scattering (EWDLS). In detail we ...studied dilute suspensions of silica spheres and shells with a smooth surface and silica particles with controlled surface roughness. While the near wall dynamics of the particle with a smooth surface differ only slightly from the theoretical prediction for hard sphere colloids, the rough particles diffuse significantly slower. We analysed the experimental data by comparison with model calculations and suggest that the deviating dynamics of the rough particles are not due to increased hydrodynamic interaction with the wall. Rather, the particle roughness significantly changes their DLVO interaction with the wall, which in turn affects their diffusion.
The impact of particle morphology and interaction on near wall dynamics was investigated with evanescent dynamic light scattering. Particle wall interactions overcompensate hydrodynamic effects.
PDF
