CuO nanoparticles (NPs) are applied in various key technologies, such as catalysis, energy conversion, printable electronics and nanojoining. In this study, an economic, green and easy-scalable ...sol-gel synthesis method was adopted to produce submicron-sized nanoporous CuO NP aggregates with a specific surface area > 18 m²/g. To this end, a copper-carbonate containing precursor was precipitated from a mixed solution of copper acetate and ammonia carbonate and subsequently calcinated at T ≥ 250 °C. The thus obtained CuO nanopowder is composed of weakly-bounded agglomerates, which are constituted of aggregated CuO NPs with a tunable size in the range of 100-140 nm. The CuO aggregates, in turn, are composed of equi-axed primary crystallites with a tunable crystallite size in the range of 20-40 nm. The size and shape of the primary CuO crystallites, as well as the nanoporosity of their fused CuO aggregates, can be tuned by controlled variation of the degree of supersaturation of the solution via the pH and the carbonate concentration. The synthesized submicron-sized CuO aggregates can be more easily and safely processed in the form of a solution, dispersion or paste than individual NPs, while still offering the same enhanced reactivity due to their nanoporous architecture.
Carbon nanotubes (CNTs) have numerous exciting potential applications and some that have reached commercialization. As such, quantitative measurements of CNTs in key environmental matrices (water, ...soil, sediment, and biological tissues) are needed to address concerns about their potential environmental and human health risks and to inform application development. However, standard methods for CNT quantification are not yet available. We systematically and critically review each component of the current methods for CNT quantification including CNT extraction approaches, potential biases, limits of detection, and potential for standardization. This review reveals that many of the techniques with the lowest detection limits require uncommon equipment or expertise, and thus, they are not frequently accessible. Additionally, changes to the CNTs (e.g., agglomeration) after environmental release and matrix effects can cause biases for many of the techniques, and biasing factors vary among the techniques. Five case studies are provided to illustrate how to use this information to inform responses to real-world scenarios such as monitoring potential CNT discharge into a river or ecotoxicity testing by a testing laboratory. Overall, substantial progress has been made in improving CNT quantification during the past ten years, but additional work is needed for standardization, development of extraction techniques from complex matrices, and multimethod comparisons of standard samples to reveal the comparability of techniques.
Electrophoretic deposition (EPD) of nanoporous oxide coatings is an interesting research avenue owing to the experimental simplicity and broad scope of applications and materials. In this study, the ...properties of concentrated (up to 5000 mg/L), nonaqueous CuO nanoparticle (NP) dispersions were tailored to produce micrometer-thick, nanoporous CuO films by EPD. In particular, we performed a systematic investigation of the electrophoretic mobilities and size distributions of dispersed CuO aggregates and developing agglomerates in different organic solvents for concentrations ranging from 50 to 5000 mg/L with and without surfactant addition. Time-resolved dynamic light scattering analyses showed that aggregate mobilities and agglomeration rates decrease with increasing hydrocarbon chain length of the organic solvent (from ethanol to hexanol) and thus with increasing viscosity. The highest electrophoretic mobility was obtained for CuO NP aggregates and agglomerates dispersed in ethanol as a solvent. However, the addition of ≥0.5 wt % acetylacetone as a surfactant is required to stabilize these dispersions for subsequent EPD and at the same time introduce a net attractive (electrostatic) interaction between neighboring agglomerates on the substrate to promote layer formation during the EPD step. The produced micrometer-thick nanoporous CuO coatings can serve as high surface area nanostructured materials or nanoporous scaffolds in catalysis, combustion, propellants, and nanojoining.
Biochar and activated carbon, both carbonaceous pyrogenic materials, are important products for environmental technology and intensively studied for a multitude of purposes. A strict distinction ...between these materials is not always possible, and also a generally accepted terminology is lacking. However, research on both materials is increasingly overlapping: sorption and remediation are the domain of activated carbon, which nowadays is also addressed by studies on biochar. Thus, awareness of both fields of research and knowledge about the distinction of biochar and activated carbon is necessary for designing novel research on pyrogenic carbonaceous materials. Here, we describe the dividing ranges and common grounds of biochar, activated carbon and other pyrogenic carbonaceous materials such as charcoal based on their history, definition and production technologies. This review also summarizes thermochemical conversions and non-thermal pre- and post-treatments that are used to produce biochar and activated carbon. Our overview shows that biochar research should take advantage of the numerous techniques of activation and modification to tailor biochars for their intended applications.
An approach for the size measurement of particulate (nano)materials by transmission electron microscopy was evaluated. The approach combines standard operating procedures for specimen preparation, ...imaging, and image analysis, and it was evaluated on a series of certified reference materials and representative test materials with varying physical properties, including particle size, shape, and agglomeration state. The measurement of the median value of the minimal external particle diameter distribution was intra-laboratory validated. The validation study included an assessment of the limit of detection, working range, selectivity, precision, trueness, robustness, and ruggedness. An uncertainty that was associated to intermediate precision in the range of 1-7% and an expanded measurement uncertainty in the range of 7-20% were obtained, depending on the material and image analysis mode. No bias was observed when assessing the trueness of the approach on the certified reference materials ERM-FD100 and ERM-FD304. The image analysis method was validated in an inter-laboratory study by 19 laboratories, which resulted in a within-laboratory precision in the range of 2-8% and a between-laboratory precision of between 2% and 14%. The automation and standardization of the proposed approach significantly improves labour and cost efficiency for the accurate and precise size measurement of the particulate materials. The approach is shown to be implementable in many other electron microscopy laboratories.
Because of their biocide properties, silver nanoparticles (AgNPs) are present in numerous consumer products. The biocidal properties of AgNPs are due to both the interactions between AgNP and cell ...membranes and the release of dissolved silver (Ag+). Recent studies emphasized the role of different nanoparticle coatings in complexing and storing Ag+. In this study, the availability of dissolved silver in the presence of algae was assessed for three AgNPs with different silver contents (59%, 34% and 7% of total Ag), silver core sizes and casein shell thicknesses. The impact of ionic silver on the photosynthetic yield of Chlamydomonas reinhardtii was used as a proxy to estimate the amount of ionic silver toxically active during in vivo assays. The results showed that cysteine, a strong silver ligand, mitigated the toxicity of AgNPs in all cases, demonstrating the key role of Ag+ in this toxicity. The results showed that the AgNPs presenting an intermediate level of silver (34%) were 10 times more effective in terms of total mass (EC50 ten times smaller) than those presenting more (59%) or less (7%) silver. The higher toxicity was due to the higher release of Ag+ under biotic conditions due to the high surface/mass ratio of the nanoparticle silver core. Protein shells played a minor role in altering the availability of Ag+, probably acting as intermediate reservoirs. This study highlighted the utility of a very sensitive biological endpoint (i.e., algal photosynthesis) for the optimization of ionic silver delivery by nanomaterials.
Display omitted
•The Ag soluble is the main responsible for the biocidal activity of AgNPs.•There is difficult to assess the Ag bioavailable from AgNPs at biological interfaces.•Algal photosynthesis may be used a as a sensible bioavailable-Ag sensor.•The protein shells and the surface of AgNPs determine the amount of bioavailable Ag.
In recent years, the capabilities for characterizing inorganic nanoparticles (NPs) in aqueous solvents with respect to their elemental composition, mass and particle number concentration have been ...expanded using single particle inductively coupled plasma mass spectrometry (sp-ICPMS). However, NPs with high monodispersity, size, shape and surface chemistry control are frequently synthesized using hot-injection methods, utilizing hydrophobic organic ligands which are only soluble in non-polar organic solvents. Due to several instrumental limitations, suspensions in organic solvents are not commonly analysed by sp-ICPMS. In this study, we investigated the direct introduction of toluene and mesitylene into an ICPMS using a microdroplet generator. With this configuration the solvent load in the ICP is substantially reduced and soot formation, causing instrumental drift, was minimized while maintaining a transport efficiency (TE) of 100%. Furthermore, the effect of different vacuum interface configurations and the addition of oxygen or nitrogen on the detection efficiency (DE) and instrumental background signals was investigated for Al, Si, Ti, Fe Cu, Ag, Cd, and Pb. The highest DE was obtained for a "Jet" interface with the addition of nitrogen at a flow rate of 10 mL min
−1
, resulting in an increase by a factor of 2-8 depending on the element. The lowest detectable mass, based on counting statistics, was 1.4 ag for Pb, which corresponds to a diameter of 6.1 nm of a spherical, metallic NP. The approach can not only be used for NP characterization, but also holds promise for the sensitive determination of trace elements in organic solvents.
Suspensions of nanoparticles in toluene and mesitylene were directly analyzed by ICPMS using microdroplet-based sample introduction.
The kinetics and efficiencies of arsenite and arsenate removal from water were evaluated using polyaluminum granulates (PAG) with high content of aluminum nanoclusters. PAG was characterized to be ...meso- and macroporous, with a specific surface area of 35 ± 1 m2 g–1. Adsorption experiments were conducted at pH 7.5 in deionized water and synthetic water with composition of As-contaminated groundwater in the Pannonian Basin. As(III) and As(V) sorption was best described by the Freundlich and Langmuir isotherm, respectively, with a maximum As(V) uptake capacity of ∼200 μmol g–1 in synthetic water. While As(III) removal reached equilibrium within 40 h, As(V) was removed almost entirely within 20 h. Micro X-ray fluorescence and electron microscopy revealed that As(III) was distributed uniformly within the grain, whereas As(V) diffused up to 81 μm into PAG. The results imply that As(V) is adsorbed 3 times faster while being transported 105 times slower than As(III) in Al hydroxide materials.
Chromate is a toxic contaminant of potential concern, as it is quite soluble in the alkaline pH range and could be released to the environment. In cementitous systems, CrO4 2− is thought to be ...incorporated as a solid solution with SO4 2− in ettringite. The formation of a solid solution (SS) could lower the soluble CrO4 2− concentrations. Ettringite containing SO4 2− or CrO4 2− and mixtures thereof have been synthesized. The resulting solids and their solubility after an equilibration time of 3 months have been characterized. For CrO4-ettringite at 25 °C, a solubility product log K S0 of −40.2 ± 0.4 was calculated: log KCrO4−ettringite = 6log{Ca2+} + 2log{Al(OH)4 −} + 3log{CrO4 2−} + 4log{OH−} + 26log{H2O}. X-ray diffraction and the analysis of the solution indicated the formation of a regular solid solution between SO4- and CrO4-ettringite with a miscibility gap between 0.4 ≤ XCrO4 ≤ 0.6. The miscibility gap of the SO4- and CrO4-ettringite solid solution could be reproduced with a dimensionless Guggenheim fitting parameter (a 0) of 2.03. The presence of a solid solution between SO4- and CrO4-ettringite results in a stabilization of the solids compared to the pure ettringites and thus in an increased uptake of CrO4 2− in cementitious systems.
PDF
