Display omitted
•Recent reactive species in plasma discharge systems.•New classification of plasmas discharges according to different criteria.•Variety of reactor configurations recently ...reported.•Recent configurations of plasma discharge alone and coupled with other process.•Advantages and drawbacks in plasma discharge for water treatment.
Owing to the water crisis, the development of innovative and clean advanced oxidation processes to decompose a variety of harmful organic compounds in wastewater becomes the main challenge for many research teams. Cold discharge plasma is one of the most widely studied and developed processes, owing to its low energy cost and easy to operate. The impact of different factors on the decontamination effectiveness of discharge plasma are detailed in this review. The generation and reaction mechanisms of reactive species in discharge plasma systems have also gained a significant interest and hence discussed. Several potentials and laboratory-scale reactor design recently reported are discussed and schematically presented. The recent combination of discharge plasma decontamination and other processes in both post and pre-treatment configuration are reported. Some applications of water treatment based on discharge plasma at the pilot scale have been addressing.
The heterogeneous photocatalysis process has been known to provide significant levels of degradation and mineralization of emerging contaminants including antibiotics. For that, nanoparticle CuCr
2
O
...4
(CCO) ceramics were successfully prepared via sol-gel (SG) and co-precipitation (CP) methods to obtain spinel with desired structural features and properties and also to improve the photocatalytic performances. The CCO crystallite phase was produced at 750 °C all ceramics, disregarding the synthesis route. CCO physical and chemical properties were checked by X-ray diffraction (XRD) with Rietveld refinement, Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), transmission electron microscope (TEM), and diffuse reflectance solid (DRS). The XRD patterns demonstrated that the synthesized catalysts displayed a small crystallite size between 17.45 and 26.24 nm for SG and 20.97 and 36.86 nm for the CCO
CP
samples. The observation by SEM and TEM of the nanopowders showed a typical morphology with comparable particle sizes for both synthesized routes (20–30 nm). SG agglomeration rates were higher, and particles stick together more efficiently considering the CP method, while the CCO
CP
method led to a more significant porosity. Their photocatalytic and adsorption performances were examined for cefaclor (CFC) removal chosen as a target pharmaceutical contaminant in water. The results obtained by the methods differed since nanoparticles prepared by SG led to high photocatalytic activity. In contrast, a high CFC adsorption was observed for those prepared via the CP method, and that agreed with the findings of the characterization analysis. The kinetics of the adsorption process was found to follow the pseudo-second-order rate law. In contrast, the data of the photodegradation process were further found to comply with the Lagergren kinetic law. Nevertheless, the global reaction rate is probably controlled by the intra-particular diffusion of CFC, regardless of the elimination process.
This study investigates the pilot-scale combination of nonthermal plasma and photocatalysis for removing Toluene and dimethyl sulfur (DMDS), examining the influence of plasma energy and initial ...pollutant concentration on the performance and by-product formation in both pure compounds and mixtures. The results indicate a consistent 15% synergy effect, improving Toluene conversion rates compared to single systems. Ozone reduction and enhanced CO2 selectivity were observed when combining plasma and photocatalysis. This process effectively treats pollutant mixtures, even those containing sulfur compounds. Furthermore, tests confirm nonthermal plasma’s in-situ regeneration of the photocatalytic surface, providing a constant synergy effect.
Although several non-thermal plasmas (NTPs) technologies have been widely investigated in air treatment, very few studies have focused on the inactivation mechanism of viruses by NTPs. Due to its ...efficiency and environmental compatibility, non-thermal plasma could be considered a promising virus-inactivation technology. Plasma is a partly or fully ionized gas including some species (i.e., electrons, free radicals, ions, and neutral molecules) to oxidize pollutants or inactivate harmful organisms. Non-thermal plasmas are made using less energy and have an active electron at a much higher temperature than bulk gas molecules. This review describes NTPs for virus inactivation in indoor air. The different application processes of plasma for microorganism inactivation at both laboratory and pilot-scale was also reviewed This paper reports on recent advances in this exciting area of viral inactivation identifying applications and mechanisms of inactivation, and summarizing the results of the latest experiments in the literature. Moreover, special attention was paid to the mechanism of virus inactivation. Finally, the paper suggests research directions in the field of airborne virus inactivation using non-thermal plasma.
Indoor air quality has become a significant public health concern. The low cost and high efficiency of photocatalytic technology make it a natural choice for achieving deep air purification. ...Photocatalysis procedures have been widely investigated for environmental remediation, particularly for air treatment. Several semiconductors, such as TiO2, have been used for photocatalytic purposes as catalysts, and they have earned a lot of interest in the last few years owing to their outstanding features. In this context, this review has collected and discussed recent studies on advances in improving the photocatalytic activity of TiO2-based materials for indoor air treatment and bacterial inactivation. In addition, it has elucidated the properties of some widely used TiO2-based catalysts and their advantages in the photocatalytic process as well as improved photocatalytic activity using doping and heterojunction techniques. Current publications about various combined catalysts have been summarized and reviewed to emphasize the significance of combining catalysts to increase air treatment efficiency. Besides, this paper summarized works that used these catalysts to remove volatile organic compounds (VOCs) and microorganisms. Moreover, the reaction mechanism has been described and summarized based on literature to comprehend further pollutant elimination and microorganism inactivation using photocatalysis. This review concludes with a general opinion and an outlook on potential future research topics, including viral disinfection and other hazardous gases.
This study presents a novel approach for synthesizing a ternary composite material comprised of carbon nitride nanosheets, titanium, and calcium oxides via an ultrasonic route. The successful ...formation and composition of the nanocomposite material were confirmed by several characterizations, such as X-ray diffraction, FTIR, and EDX analysis. The N2 adsorption/desorption analysis confirms the mesoporous nanostructure of the material with a high specific surface area (62m2.g−1). The adsorption properties of the nanocomposite were tested for nickel ion removal from an aqueous solution, and the effects of pH and initial concentration of the adsorbate were evaluated. The results indicate that the adsorption process depends on pH and initial concentration, with a maximum adsorption capacity of up to 483 mg.g−1. Removing Ni2+ ions is a chemisorption process following pseudo-second-order kinetics and is well-described by the Langmuir adsorption model. Furthermore, a plausible mechanism for Ni2+ ions adsorption onto CaTiO3@g-C3N4 nanocomposite particles' surface is suggested. The material's properties and synthesis process provide an economical and efficient solution for wastewater remediation, aligning with the UN Sustainable Development Goals (UN SDGs).
Display omitted
•A ternary CaTiO3@g-C3N4 nanocomposite was synthesized using a straightforward ultrasonic route.•X-ray diffraction, EDX, and BET analysis confirmed the successful formation of the mesoporous composite material.•The adsorption of nickel ions was influenced by the pH, the initial concentration of heavy metals, and the stirring time.•The adsorption kinetics followed a pseudo-second-order model, indicating that chemisorption was the rate-limiting step. The Langmuir isotherm model described the adsorption behavior of the nanocomposite.•The nanocomposite's chemical stability is a potential solution for water contamination issues.
This work aims to synthesize and characterize a material that can be used as an effective catalyst for photocatalytic application to remove both organic and inorganic compounds from wastewater. In ...this context, sillenite Bi12ZnO20 (BZO) in a pure phase was synthesized using the sol–gel method. Before calcination, differential scanning calorimetry (DSC) analysis was done to determine the temperature of the formation of the sillenite phase, which was found to be 800 °C. After calcination, the phase was identified by X-ray diffraction (XRD) and then refined using the Rietveld refinement technique. The results prove that BZO crystals have a cubic symmetry with the space group I23 (N°197); the lattice parameters of the structure were also determined. From the crystalline size, the surface area was estimated using the Brunauer-Emmett-Teller (BET) method, which was found to be 11.22 m2/g. The formation of sillenite was also checked using the Raman technique. The morphology of the crystals was visualized using electron scanning microscope (SEM) analysis. After that, the optical properties of BZO were investigated by diffuse reflectance spectroscopy (DRS) and photoluminescence (PL); an optical gap of 2.9 eV was found. In the final step, the photocatalytic activity of the BZO crystals was evaluated for the removal of inorganic and organic pollutants, namely hexavalent chromium Cr(VI) and Cefixime (CFX). An efficient removal rate was achieved for both contaminants within only 3 h, with a 94.34% degradation rate for CFX and a 77.19% reduction rate for Cr(VI). Additionally, a kinetic study was carried out using a first-order model, and the results showed that the kinetic properties are compatible with this model. According to these findings, we can conclude that the sillenite BZO can be used as an efficient photocatalyst for wastewater treatment by eliminating both organic and inorganic compounds.
This research aims to investigate the effect of copper doping on the photocatalysis performance of TiO
2
nanoparticles for disposal wastewater from organic pollutants. X-ray diffraction analysis ...manifests the crystallization of a rutile phase for pure and copper-doped TiO
2
except for 2% resulting in a rutile-to-anatase phase transformation. The crystallite size is found less affected by Cu doping, i.e., ~30 nm. BET analysis indicates a decrease in the specific surface area as the doping loading increases. Scanning electron microscopy observations reveal spherical particles at the nanometer range for pure TiO
2
and then larger agglomerates of ultrafine particles with Cu doping. FTIR analysis notifies the existence of hydroxyl groups, which will promote the photocatalysis process. The photodegradation of azucryl red (AR) has been investigated under different conditions; i.e., Cu-loading, initial concentration of AR, and pH. The kinetics of the photodegradation process is further found to comply with the Lagergren kinetic law, regardless the experimental conditions. Nevertheless, the photodegradation process is not only controlled by the intra-particle diffusion mechanism, but also by mass transfer through a liquid film boundary. The maximum degradation of AR, i.e., 86%, has been achieved at pH = 5.0 during 60 min of contact time for the 2% Cu doping, with effective regeneration. The Freundlich model exhibits a better fitting for AR dye photodegradation equilibrium data, compared to Langmuir, Temkin, and Dubinin-Radushkevich.
The aim of this work consists on the synthesis of a nanomaterial for heavy metal ion removal from aqueous solutions. Al-doped ZnO (ZnO:Al
x
%) nanopowders with 0 to 5% Al content are prepared via an ...amended sol-gel method. The morphology and microstructure of the prepared ZnO:Al
x
% are probed by means of scanning electron microscopy (SEM), X-ray particles diffraction (XRD) analysis, energy dispersive X-ray spectroscopy (EDS) and elemental mapping. The findings reveal the prevalence of the hexagonal wurtzite ZnO structure with increasing crystallite size (45 to 60 nm) as a result of Al doping. SEM images show nearly spherical nanoparticles with considerable aggregation. EDS and elemental mapping analysis confirm the incorporation of Al within ZnO host lattice. The relatively large surface area as estimated from N
2
adsorption makes the nanopowders very favorable for the uptake Cd(II), Cr (IV), Co (II) and Ni(II) from aqueous solution. The ZnO:Al
x
% with 1 wt% Al exhibits the highest uptake rate of heavy metal ions. The adsorption process has been found to be spontaneous and endothermic and obey Langmuir adsorption model. The high tendency of the prepared nanoparticles to eliminate heavy metal ions renders them suitable candidates for environmental remediation. Desorption studies with 0.1 M NaOH indicate that ZnO:Al
x
% can be regenerated effectively.
This work reports on the effect of TiO2 nanotubes (TiO2-NTs), decorated wih platinum nanoparticles (Pt-NPs), on the removal of bacteria and volatile organic compounds (VOCs). The Pt-NPs were loaded ...onto the TiO2-NTs using the electrodeposition method at four decoration times (100, 200, 300, and 600 s). The realized Pt-NPs/TiO2-NTs nanocomposites were used for the degradation of cyclohexane, a highly toxic and carcinogenic VOC pollutant in the chemical industry. The achieved Pt-NPs/TiO2-NTs nanocomposites were characterized using X-ray diffraction (XRD), photoluminescence (PL), diffuse reflectance spectroscopy (UV–Vis), and scanning (SEM) and transmission (TEM) electron microscopy. To understand the photocatalytic and antibacterial behavior of the Pt-NPs/TiO2-NTs, simultaneous treatment of Escherichia coli and cyclohexane was conducted while varying the catalyst time decoration. We noticed a complete bacterial inactivation rate with 90% VOC removal within 60 min of visible light irradiation. Moreover, the Langmuir–Hinshelwood model correlated well with the experimental results of the photocatalytic treatment of indoor air.
PDF
