Solution-processed inorganic and organic materials have been pursued for more than a decade as low-threshold, high-gain lasing media, motivated in large part by their tunable optoelectronic ...properties and ease of synthesis and processing. Although both have demonstrated stimulated emission and lasing, they have not yet approached the continuous-wave pumping regime. Two-dimensional CdSe colloidal nanosheets combine the advantage of solution synthesis with the optoelectronic properties of epitaxial two-dimensional quantum wells. Here, we show that these colloidal quantum wells possess large exciton and biexciton binding energies of 132 meV and 30 meV, respectively, giving rise to stimulated emission from biexcitons at room temperature. Under femtosecond pulsed excitation, close-packed thin films yield an ultralow stimulated emission threshold of 6 μJ cm(-2), sufficient to achieve continuous-wave pumped stimulated emission, and lasing when these layers are embedded in surface-emitting microcavities.
The field of plasmonics is capable of enabling interesting applications in different wavelength ranges, spanning from the ultraviolet up to the infrared. The choice of plasmonic material and how the ...material is nanostructured has significant implications for ultimate performance of any plasmonic device. Artificially designed nanoporous metals (NPMs) have interesting material properties including large specific surface area, distinctive optical properties, high electrical conductivity, and reduced stiffness, implying their potentials for many applications. This paper reviews the wide range of available nanoporous metals (such as Au, Ag, Cu, Al, Mg, and Pt), mainly focusing on their properties as plasmonic materials. While extensive reports on the use and characterization of NPMs exist, a detailed discussion on their connection with surface plasmons and enhanced spectroscopies as well as photocatalysis is missing. Here, we report on different metals investigated, from the most used nanoporous gold to mixed metal compounds, and discuss each of these plasmonic materials’ suitability for a range of structural design and applications. Finally, we discuss the potentials and limitations of the traditional and alternative plasmonic materials for applications in enhanced spectroscopy and photocatalysis.
Lead halide perovskite nanocrystals are an emerging class of materials that have gained wide interest due to their facile color tuning and high photoluminescence quantum yield. However, the lack of ...techniques to translate the high performance of nanocrystals into solid films restricts the successful exploitation of such materials in optoelectronics applications. Here, we report a heat-up and large-scale synthesis of quantum-confined, blue-emitting CsPbBr3 nanoplatelets (NPLs) that self-assemble into stacked lamellar structures. Spin-coated films fabricated from these NPLs show a stable blue emission with a photoluminescence quantum yield (PLQY) of 25%. The morphology and the optoelectronic properties of such films can be dramatically modified by UV-light irradiation under ambient conditions at a high power, which transforms the self-assembled stacks of NPLs into much larger structures, such as square-shaped disks and nanobelts. The emission from the transformed thin films falls within the green spectral region with a record PLQY of 65%, and they manifest an amplified spontaneous emission with a sharp line width of 4 nm at full-width at half-maximum under femtosecond-pulsed excitation. The transformed films show stable photocurrents with a responsivity of up to 15 mA/W and response times of tens of milliseconds and are robust under treatment with different solvents. We exploit their insolubility in ethanol to fabricate green-emitting, all-solution-processed light-emitting diodes with an external quantum efficiency of 1.1% and a luminance of 590 Cd/m2.
CsPbBr3 nanocrystals passivated with short molecular ligands and deposited on a substrate were annealed from room temperature to 400 °C in inert atmosphere. Chemical, structural, and morphological ...transformations were monitored in situ and ex situ by different techniques, while optoelectronic properties of the film were also assessed. Annealing at 100 °C resulted in a 1 order of magnitude increase in photocurrent and photoresponse as a result of partial sintering of the NCs and residual solvent evaporation. Beyond 150 °C the original orthorhombic NCs were partially transformed into tetragonal CsPb2Br5 crystals, due to the desorption of weakly bound propionic acid ligands. The photocurrent increased moderately until 300 °C although the photoresponse became slower as a result of the formation of surface trap states. Eventually, annealing beyond 350 °C removed the strongly bound butylamine ligands and reversed the transition to the original orthorhombic phase, with a loss of photocurrent due to the numerous defects induced by the stripping of the passivating butylamine.
The surface ligands on colloidal nanocrystals (NCs) play an important role in the performance of NC-based optoelectronic devices such as photovoltaic cells, photodetectors, and light-emitting diodes ...(LEDs). On one hand, the NC emission depends critically on the passivation of the surface to minimize trap states that can provide nonradiative recombination channels. On the other hand, the electrical properties of NC films are dominated by the ligands that constitute the barriers for charge transport from one NC to its neighbor. Therefore, surface modifications via ligand exchange have been employed to improve the conductance of NC films. However, in LEDs, such surface modifications are more critical because of their possible detrimental effects on the emission properties. In this work, we study the role of surface ligand modifications on the optical and electrical properties of CdSe/CdS dot-in-rods (DiRs) in films and investigate their performance in all-solution-processed LEDs. The DiR films maintain high photoluminescence quantum yield, around 40–50%, and their electroluminescence in the LED preserves the excellent color purity of the photoluminescence. In the LEDs, the ligand exchange boosted the luminance, reaching a fourfold increase from 2200 cd/m2 for native surfactants to 8500 cd/m2 for the exchanged aminoethanethiol (AET) ligands. Moreover, the efficiency roll-off, operational stability, and shelf life are significantly improved, and the external quantum efficiency is modestly increased from 5.1 to 5.4%. We relate these improvements to the increased conductivity of the emissive layer and to the better charge balance of the electrically injected carriers. In this respect, we performed ultraviolet photoelectron spectroscopy (UPS) to obtain a deeper insight into the band alignment of the LED structure. The UPS data confirm similar flat-band offsets of the emitting layer to the electron- and hole-transport layers in the case of AET ligands, which translates to more symmetric barriers for charge injection of electrons and holes. Furthermore, the change in solubility of the NCs induced by the ligand exchange allows for a layer-by-layer deposition process of the DiR films, which yields excellent homogeneity and good thickness control and enables the fabrication of all the LED layers (except for cathode and anode) by spin-coating.
The vibrational modes in organic/inorganic layered perovskites are of fundamental importance for their optoelectronic properties. The hierarchical architecture of the Ruddlesden–Popper phase of these ...materials allows for distinct directionality of the vibrational modes with respect to the main axes of the pseudocubic lattice in the octahedral plane. Here, we study the directionality of the fundamental phonon modes in single exfoliated Ruddlesden–Popper perovskite flakes with polarized Raman spectroscopy at ultralow frequencies. A wealth of Raman bands is distinguished in the range from 15 to 150 cm–1 (2–15 meV), whose features depend on the organic cation species, on temperature, and on the direction of the linear polarization of the incident light. By controlling the angle of the linear polarization of the excitation laser with respect to the in-plane axes of the octahedral layer, we gain detailed information on the symmetry of the vibrational modes. The choice of two different organic moieties, phenethylammonium (PEA) and butylammonium (BA), allows us to discern the influence of the linker molecules, evidencing strong anisotropy of the vibrations for the (PEA)2PbBr4 samples. Temperature-dependent Raman measurements reveal that the broad phonon bands observed at room temperature consist of a series of sharp modes and that such mode splitting strongly differs for the different organic moieties and vibrational bands. Softer molecules such as BA result in lower vibrational frequencies and splitting into fewer modes, while more rigid molecules such as PEA lead to higher frequency oscillations and larger number of Raman peaks at low temperature. Interestingly, in distinct bands the number of peaks in the Raman bands is doubled for the rigid PEA compared to the soft BA linkers. Our work shows that the coupling to specific vibrational modes can be controlled by the incident light polarization and choice of the organic moiety, which could be exploited for tailoring exciton–phonon interaction, and for optical switching of the optoelectronic properties of such 2D layered materials.
Metamaterials have recently established a new paradigm for enhanced light absorption in state-of-the-art photodetectors. Here, we demonstrate broadband, highly efficient, polarization-insensitive, ...and gate-tunable photodetection at room temperature in a novel metadevice based on gold/graphene Sierpinski carpet plasmonic fractals. We observed an unprecedented internal quantum efficiency up to 100% from the near-infrared to the visible range with an upper bound of optical detectivity of 10
Jones and a gain up to 10
, which is a fingerprint of multiple hot carriers photogenerated in graphene. Also, we show a 100-fold enhanced photodetection due to highly focused (up to a record factor of |E/E
| ≈ 20 for graphene) electromagnetic fields induced by electrically tunable multimodal plasmons, spatially localized in self-similar fashion on the metasurface. Our findings give direct insight into the physical processes governing graphene plasmonic fractal metamaterials. The proposed structure represents a promising route for the realization of a broadband, compact, and active platform for future optoelectronic devices including multiband bio/chemical and light sensors.
Top-down fabrication of electron-beam lithography (EBL)-defined metallic nanostructures is a successful route to obtain extremely high electromagnetic field enhancement via plasmonic effects in ...well-defined regions. To this aim, various geometries have been introduced such as disks, triangles, dimers, rings, self-similar lenses, and more. In particular, metallic dimers are highly efficient for surface-enhanced Raman spectroscopy (SERS), and their decoupling from the substrate in a three-dimensional design has proven to further improve their performance. However, the large fabrication time and cost has hindered EBL-defined structures from playing a role in practical applications. Here we present three-dimensional nanostar dimer devices that can be recycled via maskless metal etching and deposition processes, due to conservation of the nanostructure pattern in the 3D geometry of the underlying Si substrate. Furthermore, our 3D-nanostar-dimer-in-ring structures (3D-NSDiRs) incorporate several advantageous aspects for SERS by enhancing the performance of plasmonic dimers via an external ring cavity, by efficient decoupling from the substrate through an elevated 3D design, and by bimetallic AuAg layers that exploit the increased performance of Ag while maintaining the biocompatibility of Au. We demonstrate SERS detection on rhodamine and adenine at extremely low density up to the limit of few molecules and analyze the field enhancement of the 3D-NSDiRs with respect to the exciting wavelength and metal composition.
PbS nanocrystals are an important narrow-gap material for solar cells and photodetectors. Nevertheless, their application may be limited because device performance can be affected by atmospheric ...conditions. Indeed, the presence of oxygen and/or water can degrade the active layers, possibly leading to device failure. Strategies to address this issue are therefore actively explored. Here we report a solution-processed PbS quantum dot solar cell, consisting of a PbS-silane functionalized reduced graphene oxide (PbS-rGO) layer on top of the PbS absorber film, which enhances device stability, especially when the solar cells are exposed to moisture. Power conversion efficiency (PCE) measurements demonstrate a slower degradation under continuous illumination for solar cells with PbS-rGO. When storing the samples under saturated water vapor, differences are even more remarkable: with PbS-rGO the solar cells essentially maintain their initial PCE, while the PCE of the PbS reference devices is reduced by 50% after 5 days. Scanning electron microscopy, energy dispersive X-ray and X-ray photoelectron spectroscopy reveal the damage to the PbS films and the formation of PbSOx crystals in the PbS reference devices. Such crystals are not observed in the PbS-rGO devices, further supporting the importance of the PbS-rGO barrier layer.
Display omitted
•We present a solution-processed strategy integrating rGO in PbS solar cells.•We improved long-term stability using rGO, especially at 100% relative humidity.•rGO suppresses the moisture-induced damage to the PbS absorber layer.