Compared to normal arc-related volcanic eruptions, the formation of a volcanic caldera is a relatively atypical event. During caldera formation a series of large volumes of magma are erupted, ...reducing the structural support for the rock above the magma chamber and creating a large depression at the surface called caldera. Los Humeros volcanic field (LHVF) represents one of the largest volcanic calderas in Mexico. It is located some 400 km from the trench at the eastern edge of the Trans Mexican Volcanic Belt where the depth to the Cocos slab is more than 300 km. In this study we employ high-resolution two-dimensional thermomechanical numerical simulations of magma intrusions and a horizontal tectonic strain rate to better understand the influence of crustal deformation for the formation of Los Humeros caldera. A minimum number of three thermal anomaly pulses of hydrated mantle material (with diameter of 15 km or more) and a regional strain rate of 7.927 × 10
s
are required for magma to reach the surface. Modeling results show that regional extension coupled with deep thermal anomalies (with a temperature excess of ΔT ≥ 100 °C) that come in a specific chain-type sequence produce surface deformation patterns similar to LHVF. We propose an asthenospheric sub-slab deep source (> 300 km depth) for the thermal anomalies where previous studies showed the existence of a gap or tear in the Cocos slab.
The subduction of the Philippine Sea (PHS) plate along the Nankai Trough in in southwest Japan is a relatively recent process compared with subduction along the Japan Trench in northeast Japan. ...However, the tectonic evolution of the PHS plate along the Nankai Trough is still controversial and not fully understood. There are several competing hypotheses based on different estimates for the time variations of convergence rate and plate age. Our study employs numerical modelling of subduction in order to evaluate the slab evolution for the last 15 Myr and aims to evaluate each tectonic scenario against the present-day slab geometry along a profile passing through the Shikoku and Chugoku regions. The modelling strategy involves a parameter study where subduction initiation and various subduction parameters are analyzed in terms of subduction geometry evolution. Two-dimensional visco-elasto-plastic numerical simulations of spontaneous bending subduction predict that convergence rate and plate age variations play an important role in the evolution of subduction geometry. Modeling results after 15 Myr of evolution reveal that the tectonic model based on a high convergence rate between ~ 15 Ma and ~ 3 Ma produces a slab geometry that agrees well with the observed present-day slab shape specific for the Shikoku and Chugoku regions.
For some volcanic arcs, the geochemistry of volcanic rocks erupting above subducted oceanic fracture zones is consistent with higher than normal fluid inputs to arc magma sources. Here we use ...enrichment of boron (B/Zr) in volcanic arc lavas as a proxy to evaluate relative along-strike inputs of slab-derived fluids in the Aleutian, Andean, Cascades and Trans-Mexican arcs. Significant B/Zr spikes coincide with subduction of prominent fracture zones in the relatively cool Aleutian and Andean subduction zones where fracture zone subduction locally enhances fluid introduction beneath volcanic arcs. Geodynamic models of subduction have not previously considered how fracture zones may influence the melt and fluid distribution above slabs. Using high-resolution three-dimensional coupled petrological-thermomechanical numerical simulations of subduction, we show that enhanced production of slab-derived fluids and mantle wedge melts concentrate in areas where fracture zones are subducted, resulting in significant along-arc variability in magma source compositions and processes.
Dual subduction represents an unusual case of subduction where one oceanic plate subducts on top of another, creating a highly complex tectonic setting. Because of the complex interaction between the ...two subducted plates, the origin of seismicity in such region is still not fully understood. Here we investigate the thermal structure of dual subduction beneath Kanto, central Japan formed as a consequence of a unique case of triple trench junction. Using high-resolution three-dimensional thermo-mechanical models tailored for the specific dual subduction settings beneath Kanto, we show that, compared with single-plate subduction systems, subduction of double slabs produces a strong variation of mantle flow, thermal and fluid release pattern that strongly controls the regional seismicity distribution. Here the deepening of seismicity in the Pacific slab located under the Philippine Sea slab is explained by delaying at greater depths (~150 km depth) of the eclogitization front in this region. On the other hand, the shallower seismicity observed in the Philippine Sea slab is related to a young and warm plate subduction and probably to the presence of a hot mantle flow traveling underneath the slab and then moving upward on top of the slab.
As proton therapy is becoming an established treatment methodology for cancer patients, the number of proton centres is gradually growing worldwide. The economical effort for building these ...facilities is motivated by the clinical aspects, but might be also supported by the potential relevance for the research community. Experiments with high-energy protons are needed not only for medical physics applications, but represent also an essential part of activities dedicated to detector development, space research, radiation hardness tests, as well as of fundamental research in nuclear and particle physics.
Here we present the characterization of the beam line installed in the experimental room of the Trento Proton Therapy Centre (Italy). Measurements of beam spot size and envelope, range verification and proton flux were performed in the energy range between 70 and 228 MeV. Methods for reducing the proton flux from typical treatments values of 106–109 particles/s down to 101–105 particles/s were also investigated. These data confirm that a proton beam produced in a clinical centre build by a commercial company can be exploited for a broad spectrum of experimental activities. The results presented here will be used as a reference for future experiments.
The Middle America subduction zone (MASZ) is one of the world’ most complex convergent margins as it involves the subduction of the Rivera and Cocos young oceanic plates beneath the North American ...and Caribbean plates and is bounded by the Gulf of California rift and the Panama slab window. Characterized by contorted and unusual slab geometry, irregularly distributed seismicity and volcanism, exceptionally large slow slip events (SSE) and non-volcanic tremors (NVT), this subduction system represents a great natural laboratory for better understanding geodynamic processes at a fundamental level. Based on a solid observational foundation, and incorporating the latest experimental results into a coherent geodynamical framework, we shed light on the main processes controlling the subduction system evolution in this region. The tectonics, volcanism, slab geometry and segmentation along the margin are reviewed from a geodynamical perspective. We proposed and discussed a series of evolutionary scenarios for the Mexican and Central American subduction zones, providing a coherent starting base for future geodynamical modeling studies tailored to this active margin. We discuss comparatively the recently discovered SSEs and NVTs along the MASZ, and try to differentiate among the proposed mechanisms responsible for these observations. Finally we discuss the recent seismic anisotropy observations in a geodynamic context, offering an integrated view of mantle flow pattern along the entire active margin. Although the MASZ as a whole may be considered a fairly complicated region with many unusual features and sometimes controversial interpretations, its complexity and unusual characteristics can improve our knowledge about the linkage between deep and surface processes associated with subduction zone dynamics.
► We present the main geodynamic processes along the Middle America subduction zone. ► We proposed a series of models for the Mexican and Central American subduction zones. ► We discuss comparatively the slow slip events and tremors along the subduction zone. ► We examine the seismic anisotropy observations in a geodynamic context.
The origin of El Chichón volcano is poorly understood, and we attempt in this study to demonstrate that the Tehuantepec Ridge (TR), a major tectonic discontinuity on the Cocos plate, plays a key role ...in determining the location of the volcano by enhancing the slab dehydration budget beneath it. Using marine magnetic anomalies we show that the upper mantle beneath TR undergoes strong serpentinization, carrying significant amounts of water into subduction. Another key aspect of the magnetic anomaly over southern Mexico is a long-wavelength (∼
150 km) high amplitude (∼
500 nT) magnetic anomaly located between the trench and the coast. Using a 2D joint magnetic-gravity forward model, constrained by the subduction
P–
T structure, slab geometry and seismicity, we find a highly magnetic and low-density source located at 40–80 km depth that we interpret as a partially serpentinized mantle wedge formed by fluids expelled from the subducting Cocos plate. Using phase diagrams for sediments, basalt and peridotite, and the thermal structure of the subduction zone beneath El Chichón we find that ∼
40% of sediments and basalt dehydrate at depths corresponding with the location of the serpentinized mantle wedge, whereas the serpentinized root beneath TR strongly dehydrates (∼90%) at depths of 180-200 km comparable with the slab depths beneath El Chichón (200-220 km). We conclude that this strong deserpentinization pulse of mantle lithosphere beneath TR at great depths is responsible for the unusual location, singularity and, probably, the geochemically distinct signature (adakitic-like) of El Chichón volcano.
The China Seismo-Electromagnetic Satellite (CSES) aims to monitor electromagnetic, particle, and plasma perturbations in the iono-magnetosphere and inner Van Allen radiation belts originated by ...electromagnetic sources external and internal to the geomagnetic cavity, cosmic rays, and solar events. In particular, the objective of the space mission is to investigate lithosphere-atmosphere-ionosphere coupling mechanisms (including the effects of lightning, earthquakes, volcanoes, and artificial electromagnetic emissions) that induce perturbations of the top side of the ionosphere and lower boundary of the radiation belts. To this purpose, the mission has been conceived to take advantage of a multi-instrument payload comprising nine detectors for the measurement of electromagnetic field components, plasma parameters, and energetic particles, as well as X-ray flux. The Italian team participating in the CSES mission has built one of these devices, the High-Energy Particle Detector (HEPD), for high-precision observations of electrons, protons, and light nuclei. During its trip along the orbit, and thanks to the large set of detectors operated on board, CSES completely monitors the Earth, acting as an excellent instrument for space weather. The satellite was launched on 2018 February 2, with an expected life span of 5 yr. This article describes the CSES mission with a particular focus on the HEPD apparatus and its in-flight performance.
The subduction-related Michoacán–Guanajuato Volcanic Field (MGVF) in central Mexico contains ∼900 cinder cones and numerous larger shield volcanoes of Late Pliocene to Holocene age. We present data ...for major, trace and volatile (H2O, CO2, S, Cl) elements in olivine-hosted melt inclusions from eight calc-alkaline cinder cones with primitive magma characteristics and one more evolved alkali basalt tuff ring. The samples span a region extending from the volcanic front to ∼175 km behind the front. Relationships between H2O and incompatible trace elements are used to estimate magmatic H2O contents for 269 additional volcanic centers across the MGVF and central Mexico. The results show that magmatic H2O remains high (3–5·75 wt %) for large distances (∼150 km) behind the front. Chlorine and S concentrations are strongly correlated with melt H2O and are also high across most of the arc (700–1350 ppm Cl, 1500–2000 ppm S). The alkali basalt, located far behind the front (∼175 km), has much lower volatile contents (<1·5 wt % H2O, 200 ppm Cl, 500 ppm S), and is compositionally similar to other melts erupted in this region. Oxygen isotope ratios of olivine phenocrysts (5·6–6‰) from the calc-alkaline samples are higher than for typical mantle-derived magmas but do not vary systematically across the arc. Calc-alkaline samples have high large ion lithophile element concentrations relative to Nb and Ta, as is typical of subduction-related magmas, but alkali basalt samples far behind the front have high Nb and Ta and lack enrichments in fluid-mobile elements. Modeling based on volatiles and trace elements suggests that the calc-alkaline magmas were generated by 6–15% partial melting of a variably depleted mantle wedge that was fluxed with H2O-rich components from the subducted slab. In contrast, the alkali basalts formed by small degrees of decompression melting of an ocean island basalt source that had not been fluxed by slab-derived components. Based on high δ18Oolivine values and trace element characteristics, the H2O-rich subduction components added to the mantle wedge beneath the MGVF are likely to be mixtures of oceanic crust derived fluids and sediment melts. Integrating these results with new 2-D thermo-mechanical models of the subduction zone beneath the MGVF, we demonstrate that the present-day plate configuration beneath the MGVF causes fluids to be released beneath the forearc and volcanic front, and that sediment melts can be produced beneath the volcanic front by the waning stages of fluid released from the oceanic crust percolating through already dehydrated sediments. Down-dragging of serpentine- and chlorite-bearing peridotite in the lowermost mantle wedge probably plays a role in fluid transport from the forearc to beneath the arc. H2O-rich magmas located more than ∼50 km behind the volcanic front can be explained by mantle hydration related to a shallower slab geometry that existed at ∼3 Ma. Rollback of the slab over the last ∼2 Myr has resulted in strong mantle advection that forms low-H2O, high-Nb alkali basaltic magmas by decompression melting far behind the present-day volcanic front.
Subducting plates around the globe display a large variability in terms of slab geometry, including regions where smooth and little variation in subduction parameters is observed. While the vast ...majority of subduction slabs plunge into the mantle at different, but positive dip angles, the end-member case of flat-slab subduction seems to strongly defy this rule and move horizontally several hundreds of kilometers before diving into the surrounding hotter mantle. By employing a comparative assessment for the Mexican, Peruvian and Chilean flat-slab subduction zones we find a series of parameters that apparently facilitate slab flattening. Among them, trench roll-back, as well as strong variations and discontinuities in the structure of oceanic and overriding plates seem to be the most important. However, we were not able to find the necessary and sufficient conditions that provide an explanation for the formation of flat slabs in all three subduction zones. In order to unravel the origin of flat-slab subduction, it is probably necessary a numerical approach that considers also the influence of surrounding plates, and their corresponding geometries, on 3D subduction dynamics.