Glioblastoma (GBM) is the most common high-grade primary malignant brain tumor with an extremely poor prognosis. Given the poor survival with currently approved treatments for GBM, new therapeutic ...strategies are urgently needed. Advances in decades of investment in basic science of glioblastoma are rapidly translated into innovative clinical trials, utilizing improved genetic and epigenetic profiling of glioblastoma as well as the brain microenvironment and immune system interactions. Following these encouraging findings, immunotherapy including immune checkpoint blockade, chimeric antigen receptor T (CAR T) cell therapy, oncolytic virotherapy, and vaccine therapy have offered new hope for improving GBM outcomes; ongoing studies are using combinatorial therapies with the aim of minimizing adverse side-effects and augmenting antitumor immune responses. In addition, techniques to overcome the blood-brain barrier (BBB) for targeted delivery are being tested in clinical trials in patients with recurrent GBM. Here, we set forth the rationales for these promising therapies in treating GBM, review the potential novel agents, the current status of preclinical and clinical trials, and discuss the challenges and future perspectives in glioblastoma immuno-oncology.
The cancer burden in the United States of America (USA) has decreased gradually. However, China is experiencing a transition in its cancer profiles, with greater incidence of cancers that were ...previously more common in the USA. This study compared the latest cancer profiles, trends, and determinants between China and USA.
This was a comparative study using open-source data. Cancer cases and deaths in 2022 were calculated using cancer estimates from GLOBOCAN 2020 and population estimates from the United Nations. Trends in cancer incidence and mortality rates in the USA used data from the Surveillance, Epidemiology, and End Results program and National Center for Health Statistics. Chinese data were obtained from cancer registry reports. Data from the Global Burden of Disease 2019 and a decomposition method were used to express cancer deaths as the product of four determinant factors.
In 2022, there will be approximately 4,820,000 and 2,370,000 new cancer cases, and 3,210,000 and 640,000 cancer deaths in China and the USA, respectively. The most common cancers are lung cancer in China and breast cancer in the USA, and lung cancer is the leading cause of cancer death in both. Age-standardized incidence and mortality rates for lung cancer and colorectal cancer in the USA have decreased significantly recently, but rates of liver cancer have increased slightly. Rates of stomach, liver, and esophageal cancer decreased gradually in China, but rates have increased for colorectal cancer in the whole population, prostate cancer in men, and other seven cancer types in women. Increases in adult population size and population aging were major determinants for incremental cancer deaths, and case-fatality rates contributed to reduced cancer deaths in both countries.
The decreasing cancer burden in liver, stomach, and esophagus, and increasing burden in lung, colorectum, breast, and prostate, mean that cancer profiles in China and the USA are converging. Population aging is a growing determinant of incremental cancer burden. Progress in cancer prevention and care in the USA, and measures to actively respond to population aging, may help China to reduce the cancer burden.
A strategy called ultramicroporous building unit (UBU) is introduced. It allows the creation of hierarchical bi‐porous features that work in tandem to enhance gas uptake capacity and separation. ...Smaller pores from UBUs promote selectivity, while larger inter‐UBU packing pores increase uptake capacity. The effectiveness of this UBU strategy is shown with a cobalt MOF (denoted SNNU‐45) in which octahedral cages with 4.5 Å pore size serve as UBUs. The C2H2 uptake capacity at 1 atm reaches 193.0 cm3 g−1 (8.6 mmol g−1) at 273 K and 134.0 cm3 g−1 (6.0 mmol g−1) at 298 K. Such high uptake capacity is accompanied by a high C2H2/CO2 selectivity of up to 8.5 at 298 K. Dynamic breakthrough studies at room temperature and 1 atm show a C2H2/CO2 breakthrough time up to 79 min g−1, among top‐performing MOFs. Grand canonical Monte Carlo simulations agree that ultrahigh C2H2/CO2 selectivity is mainly from UBU ultramicropores, while packing pores promote C2H2 uptake capacity.
Hole to differentiate, and hole to accommodate. Two types of pores can mingle together using a strategy called UBU (ultramicroporous building unit). This strategy results in a promising gas absorbent for excellent C2H2 storage capacity and top‐level C2H2/CO2 separation ability.
Rational exploration of efficient, inexpensive, and robust electrocatalysts is critical for the efficient water splitting. Conjugated conductive metal–organic frameworks (cMOFs) with multicomponent ...layered double hydroxides (LDHs) to construct bifunctional heterostructure catalysts are considered as an efficient but complicated strategy. Here, the fabrication of a cMOF/LDH hetero‐nanotree array catalyst (CoNiRu‐NT) coupled with monodispersed ruthenium (Ru) sites via a controllable grafted‐growth strategy is reported. Rich‐amino hexaiminotriphenylene linkers coordinate with the LDH nanotrunk to form cMOF nanobranches, providing numerous anchoring sites to precisely confine and stabilize RuN4 sites. Moreover, monodispersed and reduced Ru moieties facilitate H2O adsorption and dissociation, and the heterointerface between the cMOF and the LDH further modifies the chemical and electronic structures. Optimized CoNiRu‐NT displays a significant increase in electrochemical water‐splitting properties in alkaline media, affording low overpotentials of 22 mV at 10 mA cm−2 and 255 mV at 20 mA cm−2 for the hydrogen evolution reaction and oxygen evolution reaction, respectively. In an actual electrochemical system, CoNiRu‐NT drives an overall water splitting at a low cell voltage of 1.47 V to reach 10 mA cm−2. This performance is comparable to that of pure noble‐metal‐based materials and superior to most reported MOF‐based catalysts.
A conductive metal–organic framework (cMOF)/layered double hydroxide (LDH) hetero‐nanotree structure coupled with monodisperse Ru sites is constructed via a controllable grafted‐growth strategy. Based on a competitive coordination process, RuN sites are precisely anchored by rich‐amino organic linkers. The chemical and electronic structure of the hetero‐nanotree catalysts are well modified and lead to a superior overall water‐splitting performance in alkaline media.
The development of active and durable non-precious metal based bifunctional electrocatalysts for overall water splitting is an urgent yet challenging task. In this work, we have successfully achieved ...iron doped cobalt phosphide ultrathin nanosheets (Fe-CoP UNSs) with a 2.3 nm thickness on a nickel foam (NF) substrate (termed Fe-CoP UNSs/NF) by high-temperature phosphidation treatment using atomically thick Fe doped cobalt oxide nanosheets as the reaction precursor. Because of the large surface area, sufficient edge active sites, synergistic effect between heteroatoms, high conductivity of the NF substrate, and porous structure of the NF substrate, Fe-CoP UNSs/NF displays outstanding electrocatalytic performance for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in a 1 M KOH electrolyte, such as overpotentials of 67 and 166 mV at current densities of 10 mA cm
−2
and 50 mA cm
−2
, respectively. More importantly, Fe-CoP UNSs/NF can serve as a bifunctional electrocatalyst for overall water splitting, achieving a 10 mA cm
−2
current density at a voltage of only 1.46 V in an alkaline electrolyte.
Iron doped cobalt phosphide ultrathin nanosheets on nickel foam are used as a bifunctional electrocatalyst for overall water splitting in alkaline electrolyte.
Ultrathin transition-metal-based nanomeshes can perfectly combine the advantages of two-dimensional (2D) ultrathin nanosheets and porous nanostructures, which have wide applications in energy storage ...and conversion. In this work, we present an etch-free one-step approach to directly synthesize the ultrathin Co3O4 nanomeshes (Co-UNMs) by employing a CoCl2/K3Co(CN)6 cyanogel as the reaction precursor. The 2D planar structural unit and solid properties of the cyanogel result in the preferential assembly of generated crystal nuclei at the solid–liquid interface (i.e., cyanogel–solution interface) in the 2D direction, which plays a key role in the formation of nanomeshes. The as-prepared Co-UNMs with 1.5 nm thickness and abundant pores have high surface area and numerous defect atoms, resulting in enhanced activity for the oxygen evolution reaction (OER) in alkaline media, such as a low overpotential of 307 mV at 10 mA cm–2, a small Tafel slope of 76 mV dec–1, and attractive durability in 1 M KOH electrolyte.
Sepsis is an important cause of neonatal morbidity and mortality; therefore, the early diagnosis of neonatal sepsis is essential.
Our aim was to compare the diagnostic accuracy of procalcitonin ...(PCT), C-reactive protein (CRP), procalcitonin combined with C-reactive protein (PCT + CRP) and presepsin in the diagnosis of neonatal sepsis. We searched seven databases to identify studies that met the inclusion criteria. Two independent reviewers performed data extraction. The pooled sensitivity, specificity, positive likelihood ratio (PLR), negative likelihood ratio (NLR), diagnostic odds ratio (DOR), area under curve (AUC), and corresponding 95% credible interval (95% CI) were calculated by true positive (TP), false positive (FP), false negative (FN), and true negative (TN) classification using a bivariate regression model in STATA 14.0 software. The pooled sensitivity, specificity, PLR, NLR, DOR, AUC, and corresponding 95% CI were the primary outcomes. Secondary outcomes included the sensitivity and specificity in multiple subgroup analyses.
A total of 28 studies enrolling 2661 patients were included in our meta-analysis. The pooled sensitivity of CRP (0.71 (0.63, 0.78)) was weaker than that of PCT (0.85 (0.79, 0.89)), PCT + CRP (0.91 (0.84, 0.95)) and presepsin (0.94 (0.80, 0.99)) and the pooled NLR of presepsin (0.06 (0.02, 0.23)) and PCT + CRP (0.10 (0.05, 0.19)) were less than CRP (0.33 (0.26, 0.42)), and the AUC for presepsin (0.99 (0.98, 1.00)) was greater than PCT + CRP (0.96 (0.93, 0.97)), CRP (0.85 (0.82, 0.88)) and PCT (0.91 (0.89, 0.94)). The results of the subgroup analysis showed that 0.5-2 ng/mL may be the appropriate cutoff interval for PCT. A cut-off value > 10 mg/L for CRP had high sensitivity and specificity.
The combination of PCT and CRP or presepsin alone improves the accuracy of diagnosis of neonatal sepsis. However, further studies are required to confirm these findings.
The health condition monitoring of planetary gearboxes has drawn increasing attention due to the importance for safety operation and failure prevention. A novel diagnosis methodology based on ...multiscale symbolic diversity entropy (SDivEn) is proposed in this article. Herein, dynamical complexity of measured data is quantified by SDivEn. Compare to other entropy-based descriptors, SDivEn has advantages in its robustness and computation efficiency. To increase the feature representation capability of entropy descriptors, multiscale analysis is performed, where the measurement data in time series is decomposed into multiple scaled series by using the coarse graining process and then processed individually by using SDivEn method. The proposed multiscale SDivEn method is applied for fault recognition of planetary gearboxes. Experimental results indicate that the proposed method obtains the highest accuracy in recognizing seven health conditions of planetary gearboxes in comparison with three other existing entropy-based methods.
Cancer is one of the leading causes of death globally, but its burden is not uniform. GLOBOCAN 2020 has newly updated the estimates of cancer burden. This study summarizes the most recent changing ...profiles of cancer burden worldwide and in China and compares the cancer data of China with those of other regions.
We conducted a descriptive secondary analysis of the GLOBOCAN 2020 data. To depict the changing global profile of the leading cancer types in 2020 compared with 2018, we extracted the numbers of cases and deaths in 2018 from GLOBOCAN 2018. We also obtained cancer incidence and mortality from the 2015 National Cancer Registry Report in China when sorting the leading cancer types by new cases and deaths. For the leading cancer types according to sex in China, we summarized the estimated numbers of incidence and mortality, and calculated China's percentage of the global new cases and deaths.
Breast cancer displaced lung cancer to become the most leading diagnosed cancer worldwide in 2020. Lung, liver, stomach, breast, and colon cancers were the top five leading causes of cancer-related death, among which liver cancer changed from the third-highest cancer mortality in 2018 to the second-highest in 2020. China accounted for 24% of newly diagnosed cases and 30% of the cancer-related deaths worldwide in 2020. Among the 185 countries included in the database, China's age-standardized incidence rate (204.8 per 100,000) ranked 65th and the age-standardized mortality rate (129.4 per 100,000) ranked 13th. The two rates were above the global average. Lung cancer remained the most common cancer type and the leading cause of cancer death in China. However, breast cancer became the most frequent cancer type among women if the incidence was stratified by sex. Incidences of colorectal cancer and breast cancer increased rapidly. The leading causes of cancer death varied minimally in ranking from 2015 to 2020 in China. Gastrointestinal cancers, including stomach, colorectal, liver, and esophageal cancers, contributed to a massive burden of cancer for both sexes.
The burden of breast cancer is increasing globally. China is undergoing cancer transition with an increasing burden of lung cancer, gastrointestinal cancer, and breast cancers. The mortality rate of cancer in China is high. Comprehensive strategies are urgently needed to target China's changing profiles of the cancer burden.
The high storage capacity versus high selectivity trade‐off barrier presents a daunting challenge to practical application as an acetylene (C2H2) adsorbent. A structure–performance relationship ...screening for sixty‐two high‐performance metal–organic framework adsorbents reveals that a moderate pore size distribution around 5.0–7.5 Å is critical to fulfill this task. A precise pore space partition approach was involved to partition 1D hexagonal channels of typical MIL‐88 architecture into finite segments with pore sizes varying from 4.5 Å (SNNU‐26) to 6.4 Å (SNNU‐27), 7.1 Å (SNNU‐28), and 8.1 Å (SNNU‐29). Coupled with bare tetrazole N sites (6 or 12 bare N sites within one cage) as high‐density H‐bonding acceptors for C2H2, the target MOFs offer a good combination of high C2H2/CO2 adsorption selectivity and high C2H2 uptake capacity in addition to good stability. The optimized SNNU‐27‐Fe material demonstrates a C2H2 uptake of 182.4 cm3 g−1 and an extraordinary C2H2/CO2 dynamic breakthrough time up to 91 min g−1 under ambient conditions.
Benchmark metal–organic framework (MOF) adsorbents for C2H2/CO2 separation are reported. The MOFs offer moderate pore size distributions, which are regulated by precise pore space partitions and coupled with a high‐density of hydrogen‐bonding acceptors.