Atherosclerosis is one of the leading causes of mortality in the world, which is a multistep cardiovascular disease promoted by several of risk factors. However, the detailed mechanism of ...atherosclerosis remained unclear. LncRNAs have been proved to play an important role in various of biological and pathological processes, but the role of lncRNA in atherosclerosis largely remained unidentified.
Blood sample were collected from 42 patients with atherosclerosis and 37 healthy volunteers. The expression of lncRNA H19 was detected by the qRT-PCR assay. Proliferation and apoptosis of HUVEC were also detected after lncRNA H19 was overexpressed. The expression of p38 and p65 were also measured by Western blot.
Compared with the normal healthy people, the expression of H19 was higher in patients with atherosclerosis. After lncRNA H19 was overexpressed in HUVEC, the proliferation ability was increased while apoptosis was suppressed. What's more, p38 and p65 were increased after lncRNA H19 was overexpressed.
LncRNA H19 was highly expressed in atherosclerosis, which could be used as a potential target for treating atherosclerosis.
Fast radio bursts (FRBs) are millisecond-duration radio transients
of unknown origin. Two possible mechanisms that could generate extremely coherent emission from FRBs invoke neutron star ...magnetospheres
or relativistic shocks far from the central energy source
. Detailed polarization observations may help us to understand the emission mechanism. However, the available FRB polarization data have been perplexing, because they show a host of polarimetric properties, including either a constant polarization angle during each burst for some repeaters
or variable polarization angles in some other apparently one-off events
. Here we report observations of 15 bursts from FRB 180301 and find various polarization angle swings in seven of them. The diversity of the polarization angle features of these bursts is consistent with a magnetospheric origin of the radio emission, and disfavours the radiation models invoking relativistic shocks.
Strain-hardening (the increase of flow stress with plastic strain) is the most important phenomenon in the mechanical behaviour of engineering alloys because it ensures that flow is delocalized, ...enhances tensile ductility and inhibits catastrophic mechanical failure
. Metallic glasses (MGs) lack the crystallinity of conventional engineering alloys, and some of their properties-such as higher yield stress and elastic strain limit
-are greatly improved relative to their crystalline counterparts. MGs can have high fracture toughness and have the highest known 'damage tolerance' (defined as the product of yield stress and fracture toughness)
among all structural materials. However, the use of MGs in structural applications is largely limited by the fact that they show strain-softening instead of strain-hardening; this leads to extreme localization of plastic flow in shear bands, and is associated with early catastrophic failure in tension. Although rejuvenation of an MG (raising its energy to values that are typical of glass formation at a higher cooling rate) lowers its yield stress, which might enable strain-hardening
, it is unclear whether sufficient rejuvenation can be achieved in bulk samples while retaining their glassy structure. Here we show that plastic deformation under triaxial compression at room temperature can rejuvenate bulk MG samples sufficiently to enable strain-hardening through a mechanism that has not been previously observed in the metallic state. This transformed behaviour suppresses shear-banding in bulk samples in normal uniaxial (tensile or compressive) tests, prevents catastrophic failure and leads to higher ultimate flow stress. The rejuvenated MGs are stable at room temperature and show exceptionally efficient strain-hardening, greatly increasing their potential use in structural applications.
The FDA is developing guidance on the use of “real-world evidence” — health care information from atypical sources, including electronic health records, billing databases, and product and disease ...registries — to assess the safety and effectiveness of drugs and devices.
The term “real-world evidence” is widely used by those who develop medical products or who study, deliver, or pay for health care, but its specific meaning is elusive. We believe it refers to information on health care that is derived from multiple sources outside typical clinical research settings, including electronic health records (EHRs), claims and billing data, product and disease registries, and data gathered through personal devices and health applications.
1
,
2
Key to understanding the usefulness of real-world evidence is an appreciation of its potential for complementing the knowledge gained from traditional clinical trials, whose well-known limitations make it difficult . . .
Reports of ChAdOx1 vaccine-associated thrombocytopenia and vascular adverse events have led to some countries restricting its use. Using a national prospective cohort, we estimated associations ...between exposure to first-dose ChAdOx1 or BNT162b2 vaccination and hematological and vascular adverse events using a nested incident-matched case-control study and a confirmatory self-controlled case series (SCCS) analysis. An association was found between ChAdOx1 vaccination and idiopathic thrombocytopenic purpura (ITP) (0-27 d after vaccination; adjusted rate ratio (aRR) = 5.77, 95% confidence interval (CI), 2.41-13.83), with an estimated incidence of 1.13 (0.62-1.63) cases per 100,000 doses. An SCCS analysis confirmed that this was unlikely due to bias (RR = 1.98 (1.29-3.02)). There was also an increased risk for arterial thromboembolic events (aRR = 1.22, 1.12-1.34) 0-27 d after vaccination, with an SCCS RR of 0.97 (0.93-1.02). For hemorrhagic events 0-27 d after vaccination, the aRR was 1.48 (1.12-1.96), with an SCCS RR of 0.95 (0.82-1.11). A first dose of ChAdOx1 was found to be associated with small increased risks of ITP, with suggestive evidence of an increased risk of arterial thromboembolic and hemorrhagic events. The attenuation of effect found in the SCCS analysis means that there is the potential for overestimation of the reported results, which might indicate the presence of some residual confounding or confounding by indication. Public health authorities should inform their jurisdictions of these relatively small increased risks associated with ChAdOx1. No positive associations were seen between BNT162b2 and thrombocytopenic, thromboembolic and hemorrhagic events.
Rejuvenation of metallic glasses, bringing them to higher-energy states, is of interest in improving their plasticity. The mechanisms of rejuvenation are poorly understood, and its limits remain ...unexplored. We use constrained loading in compression to impose substantial plastic flow on a zirconium-based bulk metallic glass. The maximum measured effects are that the hardness of the glass decreases by 36%, and its excess enthalpy (above the relaxed state) increases to 41% of the enthalpy of melting. Comparably high degrees of rejuvenation have been reported only on microscopic scales at the centre of shear bands confined to low volume fractions. This extreme rejuvenation of a bulk glass gives a state equivalent to that obtainable by quenching the liquid at ~10
K s
, many orders of magnitude faster than is possible for bulk specimens. The contrast with earlier results showing relaxation in similar tests under tension emphasizes the importance of hydrostatic stress.
Two-dimensional (2D) materials have been studied extensively as monolayers, vertical or lateral heterostructures. To achieve functionalization, monolayers are often patterned using soft lithography ...and selectively decorated with molecules. Here we demonstrate the growth of a family of 2D materials that are intrinsically patterned. We demonstrate that a monolayer of PtSe
can be grown on a Pt substrate in the form of a triangular pattern of alternating 1T and 1H phases. Moreover, we show that, in a monolayer of CuSe grown on a Cu substrate, strain relaxation leads to periodic patterns of triangular nanopores with uniform size. Adsorption of different species at preferred pattern sites is also achieved, demonstrating that these materials can serve as templates for selective self-assembly of molecules or nanoclusters, as well as for the functionalization of the same substrate with two different species.
Gradient structured (GS) materials are ubiquitous in biological systems and now increasingly adopted in engineering systems to achieve desirable combinations of mechanical properties. However, how to ...control and characterize the gradient structure still remains challenging. In the present work, pure Ni samples possessing a gradient structure with a change in the grain size up to three orders of magnitude from 29 nm to 4 μm are prepared by electrodeposition, where the degree of grain size gradient is accurately controlled. The GS Ni samples exhibit a favorable combination of high strength and high ductility. An optimal grain size distribution profile is discovered which gives rise to a yield strength of 460 MPa and a uniform elongation of 8.9%, the latter even better than that of the coarse-grained Ni. Experimental observations and molecular dynamics (MD) simulations reveal that the surface roughening of coarse grains and strain localization of nano-grains can be effectively suppressed by the mutual constraint between nano-grains and coarse grains, leading to the observed superior uniform elongation. This work not only reports a promising methodology of producing materials possessing both high strength and high ductility, but also provides a model for investigating the deformation mechanisms in GS materials.
Display omitted
•We have determined the native oxide film thickness on several Al samples.•The results obtained from XRR and XPS show excellent agreement.•The results obtained from EIS show consistently thinner ...oxide films.•The oxides on the alloys are thicker than the oxides on the single crystals.
We present results from measurements of the native oxide film thickness on four different industrial aluminum alloys and three different aluminum single crystals. The thicknesses were determined using X-ray reflectivity, X-ray photoelectron spectroscopy, and electrochemical impedance spectroscopy. In addition, atomic force microscopy was used for micro-structural studies of the oxide surfaces. The reflectivity measurements were performed in ultra-high vacuum, vacuum, ambient, nitrogen and liquid water conditions. The results obtained using X-ray reflectivity and X-ray photoelectron spectroscopy demonstrate good agreement. However, the oxide thicknesses determined from the electrochemical impedance spectroscopy show a larger discrepancy from the above two methods. In the present contribution the reasons for this discrepancy are discussed. We also address the effect of the substrate type and the presence of water on the resultant oxide thickness.
PDF
