The current demand for new antimicrobial systems has stimulated research for the development of poly(lactic acid)/carvacrol (PLA/CAR)-based materials able to hinder the growth and spread of ...microorganisms. The eco-friendly characteristics of PLA and cytocompatibility make it very promising in the perspective of green chemistry applications as material for food and biomedical employments. The broad-spectrum biological and pharmacological properties of CAR, including antimicrobial activity, make it an interesting bioactive molecule that can be easily compounded with PLA by adopting the same techniques as those commonly used for PLA manufacturing. This review critically discusses the most common methods to incorporate CAR into a PLA matrix and their interference on the morphomechanical properties, release behavior, and antimicrobial activity of systems. The high potential of PLA/CAR materials in terms of chemical-physical and antimicrobial properties can be exploited for the future development of food packaging, coated medical devices, or drug delivery systems.
Abstract
Air pollution is one of the major global problems causing around 7 million dead per year. In fact, a connection between infectious disease transmission, including COVID‐19, and air pollution ...has been proved: COVID‐19 consequences on human health are found to be more severe in areas characterized by high levels of particulate matter (PM). Therefore, after the COVID‐19 pandemic, the production of air filtration devices with high filtration efficiency has gained more and more attention. Herein, a review of the post‐COVID‐19 pandemic progress in nanofibrous polymeric membranes for air filtration is provided. First, a brief discussion on the different types of filtration mechanism and the key parameters of air filtration is proposed. The materials recently used for the production of nanofibrous filter membranes are presented, distinguishing between non‐biodegradable polymeric materials and biodegradable ones. Subsequently, production technique proposed for the fabrication of nanofibrous membranes, i.e., electrospinning and solution blow spinning, are presented aiming to analyze and compare filtration efficiency, pressure drop, reusability and durability of the different polymeric system processed with different techniques. Finally, present challenges and future perspectives of nanofibrous polymeric membranes for air filtration are discussed with a particular emphasis on strategies to produce greener and more performant devices.
The aim of this work is to study the relationship between the chemical-physical properties of graphene oxide (GO) and the performance of a polyamide 6 (PA6) in terms of mechanical reinforcement and ...resistance to UV-exposure. For this purpose, two samples of GO possessing different oxidation degrees were added (0.75 wt.%) to PA6 by way of a two-step technique and the materials achieved were carefully analysed from a morphological, chemical-physical, mechanical point of view. Photo-oxidation tests were carried out to assess the performance of this class of nanohybrids after 240 h of UV-exposure. The results reveal that both nanocomposites exhibit enhanced mechanical performance and durability of PA6. However, the most oxidized GO led to a higher increase of mechanical properties and a stronger resistance to UV-exposure. All the analyses confirm that both GO samples are well dispersed and covalently attached to PA6. However, the higher the oxidation level of GO the stronger and the more extended the chemical interphase of the nanocomposite. As regards photochemical stability, both GO samples display UV-shielding capacity but the most oxidized GO also shows radical scavenging activity by virtue of its nanocavities and defects, imparted by prolonged oxidation, which endows PA6 with an outstanding durability even after 240 h of UV-exposure.
The environmental performance of biodegradable materials has attracted attention from the academic and the industrial research over the recent years. Currently, degradation behavior and possible ...recyclability features, as well as actual recycling paths of such systems, are crucial to give them both durability and eco-sustainability. This paper presents a review of the degradation behaviour of biodegradable polymers and related composites, with particular concern for multi-layer films. The processing of biodegradable polymeric films and the manufacturing and properties of multilayer films based on biodegradable polymers will be discussed. The results and data collected show that: poly-lactic acid (PLA), poly-butylene adipate-co-terephthalate (PBAT) and poly-caprolactone (PCL) are the most used biodegradable polymers, but are prone to hydrolytic degradation during processing; environmental degradation is favored by enzymes, and can take place within weeks, while in water it can take from months to years; thermal degradation during recycling basically follows a hydrolytic path, due to moisture and high temperatures (β-scissions and transesterification) which may compromise processing and recycling; ultraviolet (UV) and thermal stabilization can be adequately performed using suitable stabilizers.
Nanofibrous membranes are often the core components used to produce devices for a controlled release and are frequently prepared by electrospinning (ES). However, ES requires high production times ...and costs and is not easy to scale. Recently, solution blow spinning (SBS) has been proposed as an alternative technique for the production of nanofibrous membranes. In this study, a comparison between these two techniques is proposed. Poly (lactic acid)-based nanofibrous membranes were produced by electrospinning (ES) and solution blow spinning (SBS) in order to evaluate the different effect of liquid (carvacrol, CRV) or solid (chlorhexidine, CHX) molecules addition on the morphology, structural properties, and release behavior. The outcomes revealed that both ES and SBS nanofibrous mat allowed for obtaining a controlled release up to 500 h. In detail, the lower wettability of the SBS system allowed for slowing down the CRV release kinetics, compared to the one obtained for ES membranes. On the contrary, with SBS, a faster CHX release can be obtained due to its more hydrophilic behavior. Further, the addition of graphene nanoplatelets (GNP) led to a decrease in wettability and allowed for a slowing down of the release kinetics in the whole of the systems.
In this work, a lignocellulosic flour was achieved by grinding the cladodes of Opuntia Ficus Indica and then added to a poly-lactic acid (PLA) in order to prepare biocomposites by melt processing. ...The influence of filler content and size on the morphological, rheological, and mechanical properties of the green composites was assessed. Moreover, solvent-aided filler extraction enabled to evaluate the homogeneity of filler dispersion, as well as the effect of processing on the geometrical features of the fillers. The experimental data obtained by tensile tests proved to be remarkably higher than those predicted by Halpin–Tsai model, presumably due to the capability of the polymer to enter the empty channels of the fillers, thus dramatically increasing the interphasic region.
Electrospinning is a versatile process technology, exploited for the production of fibers with varying diameters, ranging from nano- to micro-scale, particularly useful for a wide range of ...applications. Among these, tissue engineering is particularly relevant to this technology since electrospun fibers offer topological structure features similar to the native extracellular matrix, thus providing an excellent environment for the growth of cells and tissues. Recently, nanocarbons have been emerging as promising fillers for biopolymeric nanofibrous scaffolds. In fact, they offer interesting physicochemical properties due to their small size, large surface area, high electrical conductivity and ability to interface/interact with the cells/tissues. Nevertheless, their biocompatibility is currently under debate and strictly correlated to their surface characteristics, in terms of chemical composition, hydrophilicity and roughness. Among the several nanofibrous scaffolds prepared by electrospinning, biopolymer/nanocarbons systems exhibit huge potential applications, since they combine the features of the matrix with those determined by the nanocarbons, such as conductivity and improved bioactivity. Furthermore, combining nanocarbons and electrospinning allows designing structures with engineered patterns at both nano- and microscale level. This article presents a comprehensive review of various types of electrospun polymer-nanocarbon currently used for tissue engineering applications. Furthermore, the differences among graphene, carbon nanotubes, nanodiamonds and fullerenes and their effect on the ultimate properties of the polymer-based nanofibrous scaffolds is elucidated and critically reviewed.
3D printability of green composites is currently experiencing a boost in importance and interest, envisaging a way to valorise agricultural waste, in order to obtain affordable fillers for the ...preparation of biodegradable polymer-based composites with reduced cost and environmental impact, without undermining processability and mechanical performance. In this work, an innovative green composite was prepared by combining a starch-based biodegradable polymer (Mater-Bi
, MB) and a filler obtained from the lignocellulosic waste coming from
(i.e., tomato plant) harvesting. Different processing parameters and different filler amounts were investigated, and the obtained samples were subjected to rheological, morphological, and mechanical characterizations. Regarding the adopted filler amounts, processability was found to be good, with adequate dispersion of the filler in the matrix. Mechanical performance was satisfactory, and it was found that this is significantly affected by specific process parameters such as the raster angle. The mechanical properties were compared to those predictable from the Halpin-Tsai model, finding that the prepared systems exceed the expected values.
Fiber-reinforced polymers (FRPs) are low-density, high-performance composite materials, which find important applications in the automotive, aerospace, and energy industry, to only cite a few. With ...the increasing concerns about sustainability and environment risks, the problem of the recycling of such complex composite systems has been emerging in politics, industry, and academia. The issue is exacerbated by the increased use of FRPs in the automotive industry and by the expected decommissioning of airplanes and wind turbines amounting to thousands of metric tons of composite materials. Currently, the recycling of FRPs downcycles the entire composite to some form of reinforcement material (typically for cements) or degrades the polymer matrix to recover the fibers. Following the principles of sustainability, the reuse and recycling of the whole composite—fiber and polymer—should be promoted. In this review paper, we report on recent research works that achieve the recycling of both the fiber and matrix phase of FRP composites, with the polymer being either directly recovered or converted to value-added monomers and oligomers.
This work investigates the effect of adding relatively low amounts of graphene nanoplatelets (GNP) to a biocomposite based on polylactic acid (PLA) and a lignocellulosic filler achieved by grinding ...Posidonia Oceanica leaves (Posidonia flour, PF). The ternary composites were prepared by melt extrusion and characterized from a morphological and mechanical point of view. Furthermore, hydrolytic degradation tests were performed under acidic, neutral and alkaline environment up to 900 h. Density measurements enabled to assess the degree of intraphase, i.e. the capability of polymer macromolecules to enter the voids of PF and a modified Halpin-Tsai model was presented and used to fit experimental data obtained from tensile tests. The results demonstrate that the hybrid reinforcement constituted by GNP and PF allows improving mechanical properties (up to 155%) and speeding up the degradation kinetics with respect to neat PLA and composites loaded with GNP only. In particular, the relatively fast degradation kinetics observed at pH = 7 and especially at pH = 10 make these hybrid composites very promising in the perspective of marine disposal.
•Adding GNP improves mechanical properties of green composites.•A modified Halpin-Tsai model fits experimental results at low GNP content.•Low GNP contents accelerated the degradation of green composites.•Formulation affects the hydrolysis mechanism.