Direct ethanol fuel cells are one of the most promising electrochemical energy conversion devices for portable, mobile and stationary power applications. However, more efficient and stable and less ...expensive electrocatalysts are still required. Interestingly, the electrochemical performance of the electrocatalysts toward the ethanol oxidation reaction can be remarkably enhanced by exploiting the benefits of structural and compositional sensitivity and control. Here, we describe the synthesis, characterization, and electrochemical behavior of cubic Pt–Sn nanoparticles. The electrochemical activity of the cubic Pt–Sn nanoparticles was found to be about three times higher than that obtained with unshaped Pt–Sn nanoparticles and six times higher than that of Pt nanocubes. In addition, stability tests indicated the electrocatalyst preserves its morphology and remains well-dispersed on the carbon support after 5000 potential cycles, while a cubic (pure) Pt catalyst exhibited severe agglomeration of the nanoparticles after a similar stability testing protocol. A detailed analysis of the elemental distribution in the nanoparticles by STEM-EELS indicated that Sn dissolves from the outer part of the shell after potential cycling, forming a ∼0.5 nm Pt skin. This particular atomic composition profile having a Pt-rich core, a Sn-rich subsurface layer, and a Pt-skin surface structure is responsible for the high activity and stability.
The voltammetric profile of preferentially shaped platinum nanoparticles has been used to analyze the different sites present on the surface. For the first time, this analysis has been made in NaOH ...solutions and revisited in sulfuric and perchloric acid media. The comparison with the voltammetric profiles of the model surfaces, that is, single-crystal electrodes, allows assigning the different signals appearing in the voltammograms of the nanoparticle to specific sites on the surface. A good correlation between the shape of the nanoparticle determined by TEM and the voltammetric profile is obtained. For the nanoparticles characterized in alkaline media, the adsorbed species on the surface have been characterized, and three major regions can be identified. Below 0.2 V, the major contribution is due to hydrogen adsorption, whereas above 0.6 V, adsorbed OH is the main species on the surface. Between those values, the signals are due to the competitive adsorption/desorption process of OH/H. New criteria for determining the active area in NaOH solutions has been proposed. In this medium, the total charge density measured between 0.06 and 0.90 V stands for 390 μC cm–2. The areas measured are in perfect agreement with those measured in acid media. Once the nanoparticles have been characterized, the behavior of the nanoparticles toward CO oxidation is analyzed and compared with that observed for single-crystal electrodes.
The quantitative analysis of the different surface sites on platinum samples is attempted from pure voltammetric data. This analysis requires independent knowledge of the fraction of two-dimensional ...(111) and (100) domains. Specific site-probe reactions are employed to achieve this goal. Irreversibly-adsorbed bismuth and tellurium have been revealed to be sensitive to the presence of (111) terrace domains of different width whereas almost all sites involved in (100) ordered domains have been characterized through germanium adatoms. The experimental protocol follows that used with well-defined single-crystal electrodes and, therefore, requires careful control of the surface cleanliness. Platinum basal planes and their vicinal stepped surfaces have been employed to obtain calibration plots between the charge density measured under the adatom redox peak, specific for the type of surface site, and the corresponding terrace size. The evaluation of the (100) bidimensional domains can also be achieved using the voltammetric profiles, once the fraction of (111) ordered domains present in the polyoriented platinum has been determined and their featureless contribution has been subtracted from the whole voltammetric response. Using that curve, it is possible to perform a deconvolution of the adsorption states of the polycrystalline sample different from those related to (111) domains. The fraction of (100)-related states in the deconvoluted voltammogram can then be compared to that expected from the independent estimation coming from the charge involved in the redox process undergone by the irreversibly-adsorbed germanium and thus check the result of the deconvolution. The information about the surface-site distribution can also be applied to analyze the voltammetric profile of nanocrystalline platinum electrodes.
Human activities during the last century have increased the concentration of greenhouse gases in Earth's atmosphere, mainly carbon dioxide (CO2), and the impacts of climate change around the world ...are becoming more damaging. Therefore, scientific research is needed to mitigate the consequences of atmospheric CO2, and, among others, the electrochemical CO2 conversion to useful chemicals is one of the most interesting alternatives. Herein, different Bi, Sn and Sb systems were synthesised as nanoparticles, supported on carbon (Vulcan XC‐72R) and finally used to manufacture electrodes. The Bi−Sn−Sb nanoparticulated systems and their corresponding electrodes were characterised by TEM, XPS, ICP‐OES and SEM. Electrochemical reduction of CO2 to formate was performed in an electrochemical H‐type cell in a CO2‐saturated KHCO3 and KCl solution. The Bi−Sn−Sb electrodes exhibited good activity and selectivity for the CO2 reduction towards formate. Particularly, Bi95Sb05/C and Bi80Sn10Sb10/C electrodes showed improved stability compared to previous works, keeping values of formate efficiency over 50 % after 24 h.
Carbon‐supported Bi−Sn−Sb nanoparticles were prepared, characterized, and used for the electrocatalytic reduction of CO2 to formate. Results indicate that Bi95Sb05/C and Bi80Sn10Sb10/C electrodes displayed an optimal trade‐off in terms of activity, selectivity, and stability under working conditions. Interestingly, the incorporation of small quantities of Sb and Sn to Bi significantly enhanced its stability without substantially affecting its activity and selectivity.
The structure sensitive catalytic activity for oxygen reduction reaction (ORR) on shape-controlled Pt nanoparticles (NPs) is directly imaged using scanning electrochemical microscopy (SECM). We ...synthesize and compare four types of Pt NPs: spherical, cubic, hexagonal, and tetrahedral-octahedral. Our SECM images show the hexagonal Pt NPs displaying the highest activity for ORR in two acid electrolytes. Meanwhile, cubic and tetrahedral-octahedral NPs drastically change their activity depending on specific adsorption of the different anions in solution. The NPs morphology produces predominant crystallographic planes at the surface of these shape-controlled Pt NPs, which are responsible for their different catalytic activity. Our results translate the studies on Pt single crystal electrodes present in the literature into Pt NPs that are useful as a catalyst in real fuel cells.
Multimetallic shape-controlled nanoparticles offer great opportunities to tune the activity, selectivity, and stability of electrocatalytic surface reactions. However, in many cases, our synthetic ...control over particle size, composition, and shape is limited requiring trial and error. Deeper atomic-scale insight in the particle formation process would enable more rational syntheses. Here we exemplify this using a family of trimetallic PtNiCo nanooctahedra obtained via a low-temperature, surfactant-free solvothermal synthesis. We analyze the competition between Ni and Co precursors under coreduction “one-step” conditions when the Ni reduction rates prevailed. To tune the Co reduction rate and final content, we develop a “two-step” route and track the evolution of the composition and morphology of the particles at the atomic scale. To achieve this, scanning transmission electron microscopy and energy dispersive X-ray elemental mapping techniques are used. We provide evidence of a heterogeneous element distribution caused by element-specific anisotropic growth and create octahedral nanoparticles with tailored atomic composition like Pt1.5M, PtM, and PtM1.5 (M = Ni + Co). These trimetallic electrocatalysts have been tested toward the oxygen reduction reaction (ORR), showing a greatly enhanced mass activity related to commercial Pt/C and less activity loss than binary PtNi and PtCo after 4000 potential cycles.
The use of bismuth‐based catalysts is promising for formate production by the electroreduction of CO2 captured from waste streams. However, compared to the extensive research on catalysts, only a few ...studies have focused on electrochemical reactor performance. Hence, this work studied a continuous‐mode gas–liquid–solid reaction system for investigating CO2 electroreduction to formate using Bi‐catalyst‐coated membrane electrodes as cathodes. The experimental setup was designed to analyze products obtained in both liquid and gas phases. The influence of relevant variables (e.g., temperature and input water flow) was analyzed, with the thickness of the liquid film formed over the cathode surface being a key parameter affecting system performance. Promising results, including a high formate concentration of 34 g/L with faradaic efficiency for formate of 72%, were achieved.
Bismuth is a catalyst material that selectively produces formate during the electrochemical reduction of CO2. While different synthesis strategies have been employed to create electrocatalysts with ...better performance, the restructuring of bismuth precatalysts during the reaction has also been previously reported. The mechanism behind the change has, however, remained unclear. Here, we show that Bi2O3 nanoparticles supported on Vulcan carbon intrinsically transform into stellated nanosheet aggregates upon exposure to an electrolyte. Liquid cell transmission electron microscopy observations first revealed the gradual restructuring of the nanoparticles into nanosheets in the presence of 0.1 M KHCO3 without an applied potential. Our experiments also associated the restructuring with solubility of bismuth in the electrolyte. While the consequent agglomerates were stable under moderate negative potentials (−0.3 VRHE), they dissolved over time at larger negative potentials (−0.4 and −0.5 VRHE). Operando Raman spectra collected during the reaction showed that under an applied potential, the oxide particles reduced to metallic bismuth, thereby confirming the metal as the working phase for producing formate. These results inform us about the working morphology of these electrocatalysts and their formation and degradation mechanisms.
Herein we investigate the effect of irreversibly adsorbed bismuth on polycrystalline platinum (Ptp) on the electrooxidation of glycerol in alkaline media by combining electrochemical, spectroscopic ...(in situ FTIR), and analytical (HPLC on line) techniques. We found that the activity of Ptp increases by about 5-fold when the optimal quantity of Bi ions is added to the solution. Besides, the adatom strongly impacts the reaction products by suppressing the pathways with C–C bond breaking, hindering the formation of CO (and other unknown intermediates) and enhancing the production of glycerate. Different from the results in acid media for Ptp-Bi systems where Bi blocks the oxidation pathway through the primary carbon, glycerate is the main product in alkaline media, and dihydroxyacetone is either produced in extremely low quantities or not produced. Besides, comparing our results with those in acid media, the peak current recorded at 1 mV·s–1 in this work was 1 order of magnitude higher. These results show the strong impact of the pH in the reaction rate and selectivity.
Tetrahexahedral Pt nanocrystals (THH Pt NCs) bounded by high-index facets possess a high density of active sites and display therefore a higher catalytic activity in comparison with those enclosed by ...low-index facets. In the current communication, we report, for the first time, the decoration of THH Pt NC surfaces by using Bi adatoms and have demonstrated that the catalytic activity of the Bi decorated THH Pt NCs toward HCOOH electrooxidation has been drastically enhanced in comparison with bare THH Pt NCs. It has also been revealed that the catalytic activity of Bi decorated THH Pt NCs for all coverages investigated always exhibits a higher catalytic activity that is about double that of Bi decorated Pt nanospheres. The study is of great importance regarding both fundamentals and applications.
PDF
