Surface roughness affects many properties of colloids, from depletion and capillary interactions to their dispersibility and use as emulsion stabilizers. It also impacts particle–particle frictional ...contacts, which have recently emerged as being responsible for the discontinuous shear thickening (DST) of dense suspensions. Tribological properties of these contacts have been rarely experimentally accessed, especially for nonspherical particles. Here, we systematically tackle the effect of nanoscale surface roughness by producing a library of all-silica, raspberry-like colloids and linking their rheology to their tribology. Rougher surfaces lead to a significant anticipation of DST onset, in terms of both shear rate and solid loading. Strikingly, they also eliminate continuous thickening. DST is here due to the interlocking of asperities, which we have identified as “stick–slip” frictional contacts by measuring the sliding of the same particles via lateral force microscopy (LFM). Direct measurements of particle–particle friction therefore highlight the value of an engineering-tribology approach to tuning the thickening of suspensions.
Biological tissues subjected to rubbing, such as the cornea and eyelid or articular cartilage, are covered in brushy, hydrated mucous structures in order to reduce the shear stress on the tissue. To ...mimic such biological tissues, we have prepared polyacrylamide (PAAm) hydrogels with various concentrations of un-cross-linked chains on their surfaces by synthesizing them in molds of different surface energies. The selected molding materials included hydrophilic glass, polyoxymethylene (POM), polystyrene (PS), polyethylene (PE), polypropylene (PP), and polytetrafluoroethylene (PTFE). After synthesis, demolding, and equilibration in water, the elastic modulus at the hydrogel surface decreased with increasing water contact angle of the mold. The softer, brushier surfaces did not completely collapse under compressive pressures up to 10 kPa, remaining better hydrated compared to their denser, cross-linked analogs. The hydrogels with brushier surfaces displayed an order of magnitude lower coefficient of friction than the cross-linked ones, which is attributed to the ability of their near-surface regions to retain larger amounts of liquid at the interface. The characteristic speed-dependent friction of the denser, cross-linked hydrogel surface is compared to the speed-independent friction of the brushy hydrogels and discussed from the perspectives of (elasto)hydrodynamic lubrication, permeability, and shear-induced hydrodynamic penetration depth.
We have quantified and compared the hydration capacity (i.e., capability to incorporate water molecules) of the two surface-bound hydrophilic polymer chains, dextran (dex) and poly(ethylene glycol) ...(PEG), in the form of poly(l-lysine)-graft-dextran (PLL-g-dex) and poly(l-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG), respectively. The copolymers were attached to a negatively charged silica–titania surface through the electrostatic interaction between the PLL backbone and the surface in neutral aqueous media. While the molecular weights of PLL and PEG were fixed, that of dex and the grafting density of PEG or dex on the PLL were varied. The hydration capacity of the polymer chains was quantified through the combined experimental approach of optical waveguide lightmode spectroscopy (OWLS) and quartz crystal microbalance with dissipation monitoring (QCM-D) to yield a value for areal solvation (Ψ), i.e., mass of associated solvent molecules within the polymer chains per unit substrate area. For the two series of copolymers with comparable stretched chain lengths of hydrophilic polymers, namely, PLL(20)-g-PEG(5) and PLL(20)-g-dex(10), the Ψ values gradually increased as the initial grafting density on the PLL backbone increased or as g decreased. However, the rate of increase in Ψ was higher for PEG than dextran chains, which was attributed to higher stiffness of the dextran chains. More importantly, the number of water molecules per hydrophilic group was clearly higher for PEG chains. Given that the −CH2CH2O– units that make up the PEG chains form a cage-like structure with 2–3 water molecules, these “strongly bound” water molecules can account for the slightly more favorable behavior of PEG compared to dextran in both aqueous lubrication and antifouling behavior of the copolymers.
Studying the frictional properties of interfaces with dynamic chemical bonds advances understanding of the mechanism underlying rate and state laws, and offers new pathways for the rational control ...of frictional response. In this work, we revisit the load dependence of interfacial chemical-bond-induced (ICBI) friction experimentally and find that the velocity dependence of friction can be reversed by changing the normal load. We propose a theoretical model, whose analytical solution allows us to interpret the experimental data on timescales and length scales that are relevant to experimental conditions. Our work provides a promising avenue for exploring the dynamics of ICBI friction.
Full text
Available for:
CMK, CTK, FMFMET, NUK, UL
Surface-initiated, photoinduced atom transfer radical polymerization (SI-photoATRP) enables the controlled and rapid synthesis of compositionally diverse polymer brushes over large areas by employing ...very small reaction volumes under ambient conditions and without the need for prior deoxygenation of monomer mixtures. The concentration of copper species and the type and content of amine-based ligands determine the mechanism of SI-photoATRP, regulate the kinetics of polymer-brush growth, and govern the tolerance of this polymer-grafting method toward oxygen. Despite mechanistic analogies with the corresponding solution processes, the intrinsic, highly confined nature of SI-photoATRP leads to significant differences from polymerizations within homogeneous systems. This is especially important to attain controlled/living polymerization and temporal control over polymer-brush growth by using UV light as a trigger.
Abstract Tissue engineering using scaffold-cell constructs holds the potential to develop functional strategies to regenerate bone. The interface of orthopedic implants with the host tissues is of ...great importance for its later performance. Thus, the optimization of the implant surface in a way that could stimulate osteogenic differentiation of mesenchymal stem cells (MSCs) is of significant therapeutic interest. The effect of surface roughness of polycaprolactone (PCL) on the osteogenic differentiation of human bone-marrow MSCs was investigated. We prepared surface roughness gradients of average roughness (Ra) varying from the sub-micron to the micrometer range (∼0.5–4.7 μm), and mean distance between peaks (RS m ) gradually varying from ∼214 μm to 33 μm. We analyzed the degree of cytoskeleton spreading, expression of alkaline phosphatase, collagen type 1 and mineralization. The response of cells to roughness divided the gradient into three groups of elicited stem cell behavior: 1) faster osteogenic commitment and strongest osteogenic expression; 2) slower osteogenic commitment but strong osteogenic expression, and 3) similar or inferior osteogenic potential in comparison to the control material. The stem-cell modulation by specific PCL roughness surfaces highlights the potential for creating effective solutions for orthopedic applications featuring a clinically relevant biodegradable material.