Wild thyme (
L.) herbal dust has been recognized as a potential underutilized resource for the recovery of antioxidants. The aim of this paper was to optimize natural deep eutectic solvent (NADES) ...extraction of polyphenols to obtain improved antioxidant activity of extracts determined by selected in vitro assays (DPPH, FRAP, and ABTS). Twenty different NADES systems were investigated in the first step of the screening of the extraction solvent and l-proline (Pro)-glycerine (Gly) based solvents provided the best results. Preliminary experiments organized by 2
fractional factorial design narrowed down the number of extraction factors from five (temperature, extraction time, NADES type, water content and L/S ratio) to three and determined their experimental domain for the final step. A face-centered central composite design with temperature (40-55-70 °C), extraction time (60-120-180 min) and L/S ratio (10-20-30 g NADES/g sample) was applied for influence analysis and process optimization. Multi-response optimization suggested a temperature of 65 °C, time of extraction of 180 min and L/S ratio of 28 g NADES/g DW as optimal extraction parameters. Experimental validation confirmed good agreement between experimental and predicted results in the extract obtained at optimal conditions and the interactions in the most suitable NADES (N16; Pro-Gly-H
O; 1:2:1) were confirmed by the
H-NMR.
Consumers are becoming more mindful of their well-being. Increasing awareness of the many beneficial properties of peppermint essential oil (EO) has significantly increased product sales in recent ...years. Hydrodistillation (HD), a proven conventional method, and a possible alternative in the form of microwave-assisted hydrodistillation (MWHD) have been used to isolate peppermint EO. Standard Soxhlet and alternatively supercritical fluid (SFE), microwave-assisted, and ultrasound-assisted extraction separated the lipid extracts. The distillations employed various power settings, and the EO yield varied from 0.15 to 0.80%. The estimated environmental impact in terms of electricity consumption and CO2 emissions suggested that MWHD is an energy efficient way to reduce CO2 emissions. Different extraction methods and solvent properties affected the lipid extract yield, which ranged from 2.55 to 5.36%. According to the corresponding values of statistical parameters, empiric mathematical models were successfully applied to model the kinetics of MWHD and SFE processes.
The aim of this study was to valorize
herbal dust, a particular fraction distinguished as an industrial waste from filter-tea production. Pressurized liquid extraction (PLE) was used with the aim of ...overcoming certain obstacles of conventional extraction techniques in terms of shortening extraction time, reducing solvent consumption and energy costs, using "green" solvents and obtaining high yield and quality products. In order to optimize PLE of
herbal dust, the preliminary screening of the independent variables in order to define the most influential parameters and their domain was done first. After the screening, the optimization study using the face-centered central composite experimental design (CCD) with response surface methodology (RSM) was implemented. Additionally, taking into account the high awareness of the positive influence of antioxidants on the human health and associating it with high content of polyphenolic compounds in various members of Lamiaceae family, PLE has proven to be a great approach for antioxidants recovery from
herbal dust.
The objective of this research was to optimize the natural deep eutectic solvent (NADES) extraction process from sour cherry kernels (Prunus cerasus L.). For polyphenol isolation, conventional ...solid–liquid extraction was employed using different concentrations of ethanol (0, 10, 20, 30, 40, 50, 60, 70, 80, 90, and 96%), as well as the innovative NADES extraction technique. In the initial phase of the research, a screening of 10 different NADESs was conducted, while extraction was carried out under constant parameters (50 °C, 1:20 w/w, 60 min). NADES 4, composed of lactic acid and glucose in a molar ratio of 5:1, exhibited the highest efficiency in the polyphenol isolation. In the subsequent phase of the research, response surface methodology (RSM) was utilized to optimize the extraction process. Three independent variables, namely temperature, extraction time, and solid–liquid (S/L) ratio, were examined at three different levels. The extracted samples were analyzed for total phenol (TP) and antioxidant activity using the DPPH, ABTS, and FRAP assays. ANOVA and descriptive statistics (Rsup.2 and CV) were performed to fit the applied model. According to RSM, the optimal extraction conditions were determined as follows: temperature of 70 °C, extraction time of 161 min, and S/L ratio of 1:25 w/w.
Twenty commercially available oenological tannins (including hydrolysable and condensed) were assessed for their antiradical/reducing activity, comparing two analytical approaches: The ...2,2-diphenyl-1-picrylhydrazyl (DPPH•) radical scavenging spectrophotometric assay and the cyclic voltammetry (CV) electrochemical method. Electrochemical measurements were performed over a -200 mV-500 mV scan range, and integrated anodic currents to 500 mV were used to build a calibration graph with (+)-catechin as a reference standard (linear range: From 0.0078 to 1 mM, R
= 0.9887). The CV results were compared with the DPPH• assay (expressed as % of radical scavenged in time), showing high correlation due to the similarity of the chemical mechanisms underlying both methods involving polyphenolic compounds as reductants. Improved correlation was observed by increasing the incubation time with DPPH• to 24 h (R
= 0.925), demonstrating that the spectrophotometric method requires a long-term incubation to complete the scavenging reaction when high-molecular weight tannins are involved; this constraint has been overcome by using instant CV measurements. We concluded that the CV represents a valid alternative to the DPPH• colorimetric assay, taking advantage of fast analysis and control on the experimental conditions and, because of these properties, it can assist the quality control along the supply chain.
Garlic (
L.) is widely used in various food products and traditional medicine. Besides unique taste and flavour, it is well known for its chemical profile and bioactive potential. The aim of this ...study was to apply subcritical water extraction (SWE) and pressurized liquid extraction (PLE) for the extraction of bioactive compounds from the Ranco genotype of garlic. Moreover, PLE process was optimized using response surface methodology (RSM) in order to determine effects and optimize ethanol concentration (45-75%), number of cycles (1-3), extraction time (1-3 min) and temperature (70-110 °C) for maximized total phenols content (TP) and antioxidant activity evaluated by various in vitro assays. Furthermore, temperature effect in SWE process on all responses was evaluated, while allicin content (AC), as a major organosulphur compound, was determined in all samples. Results indicated that PLE provided tremendous advantage over SWE in terms of improved yield and antioxidant activity of garlic extracts. Therefore, high-pressure processes could be used as clean and green procedures for the isolation of garlic bioactives.
The aim of this study was to valorize the oil recovery from red and white grape seeds (
L.) that remains as by-product after the winemaking process. Oils were extracted by modern techniques, ...ultrasound assisted (UAE), microwave assisted (MAE) and supercritical fluid extraction (SFE), and compared to the Soxhlet extraction (SE). Firstly, SFE was optimized at different operating conditions: pressure (250-350 bar), temperature (40-60 °C), CO
flow rate (0.2, 0.3 and 0.4 kg h
), and particle size (315-800 µm and >800 µm). The highest extraction yields were achieved by SFE at the optimal conditions: 350 bar, 60 °C, 0.4 kg h
. Afterwards, SFE was compared to SE, UAE and MAE with respect to oil extraction yields, and analyzed for fatty acid composition and antioxidant capacity. Considering the general classification of fatty acids, it was found that samples had high content of polyunsaturated fatty acids, regardless of extraction technology. Tocopherol content was significantly influenced by all extraction methods, whereas UAE and MAE resulted in extracts richer with lipophilic antioxidants. In conclusion, modern extractions that are suited for industrial applications had better performance as compared to SE, as judging by the oil yield and quality.
Timely access to topic-relevant datasets is of paramount importance for the development of any successful strategy (food waste reduction strategy), since datasets illuminate opportunities, challenges ...and development paths. PhInd is the first comprehensive database on polyphenol content in plant-based by-products from the agri-food sector or the wastewater sector and was developed using peer-reviewed papers published in the period of 2015-2021. In total, >450 scientific manuscripts and >6000 compound entries were included. Database inclusion criteria were polyphenol contents = determined using HPLC/UHPLC quantitative methods. PhInd can be explored through several criteria which are either 'open' or checkboxes. Criteria are given in subsections: (a) plant source; (b) by-product industrial processing; (c) pre-treatment of by-products before the isolation of polyphenols; and (d) the extraction step of polyphenols. Database search results could be explored on the website directly or by downloading Excel files and graphs. This unique database content is beneficial to stakeholders-the food industry, academia, government and citizens.
This study aims to compare the suitability of three extraction techniques (cold pressing, Soxhlet and supercritical fluid extraction (SFE)) to isolate oil from cherry seeds. Oils were examined in ...terms of extraction yield, fatty acids profile, tocopherols yield and antioxidant activity. Additionally, influence of SFE parameters was evaluated using one-factor-at-a-time design with pressure (200−350 bar), temperature (40−70 °C), flow rate (0.2−0.4 kg/h) and particle size (<800 µm and >800 µm). Oil yields ranged from 2.50% to 13.02%, whereas the highest yield was achieved with SFE. Samples were rich in polyunsaturated fatty acids, regardless of the applied extraction technique. The main fatty acids were linoleic (46.32−47.29%), oleic (40.89−41.65%), palmitic (6.56−8.00%) and stearic (2.21−2.30%) acid. Total tocopherols yield was between 16.63 mg/100 g oil and 60.61 mg/100 g oil, and highest yield was achieved with SFE. Among the tocopherols, γ-tocopherol was the most abundant, followed by α-, δ- and β-tocopherol. Antioxidant activity was determined using 1,1-diphenyl-2-picrylhydrazyl (DPPH) and 2,2’-azinobis-(3-ethylbenzothiazoline-6-sulfonic) cation (ABTS) assays, and the results indicated that SFE extracts exhibited better or comparable antioxidant potential compared to traditional techniques. The comparison between modern and conventional extractions for oil recovery demonstrates pros and cons for the possibility of industrial application.
This study was primarily focused on the supercritical fluid extraction (SFE) of cherry seed oil and the optimization of the process using sequential extraction kinetics modeling and artificial neural ...networks (ANN). The SFE study was organized according to Box-Behnken design of experiment, with additional runs. Pressure, temperature and flow rate were chosen as independent variables. Five well known empirical kinetic models and three mass-transfer kinetics models based on the Sovová’s solution of SFE equations were successfully applied for kinetics modeling. The developed mass-transfer models exhibited better fit of experimental data, according to the calculated statistical tests (R2, SSE and AARD). The initial slope of the SFE curve was evaluated as an output variable in the ANN optimization. The obtained results suggested that it is advisable to lead SFE process at an increased pressure and CO2 flow rate with lower temperature and particle size values to reach a maximal initial slope.