For the common difficulties of noise control in a low frequency region, an adjustable parallel Helmholtz acoustic metamaterial (APH-AM) was developed to gain broad sound absorption band by ...introducing multiple resonant chambers to enlarge the absorption bandwidth and tuning length of rear cavity for each chamber. Based on the coupling analysis of double resonators, the generation mechanism of broad sound absorption by adjusting the structural parameters was analyzed, which provided a foundation for the development of APH-AM with tunable chambers. Different from other optimization designs by theoretical modeling or finite element simulation, the adjustment of sound absorption performance for the proposed APH-AM could be directly conducted in transfer function tube measurement by changing the length of rear cavity for each chamber. According to optimization process of APH-AM, The target for all sound absorption coefficients above 0.9 was achieved in 602–1287 Hz with normal incidence and that for all sound absorption coefficients above 0.85 was obtained in 618–1482 Hz. The distributions of sound pressure for peak absorption frequency points were obtained in the finite element simulation, which could exhibit its sound absorption mechanism. Meanwhile, the sound absorption performance of the APH-AM with larger length of the aperture and that with smaller diameter of the aperture were discussed by finite element simulation, which could further show the potential of APH-AM in the low-frequency sound absorption. The proposed APH-AM could improve efficiency and accuracy in adjusting sound absorption performance purposefully, which would promote its practical application in low-frequency noise control.
To achieve the broadband sound absorption at low frequencies within a limited space, an optimal design of joint simulation method incorporating the finite element simulation and cuckoo search ...algorithm was proposed. An acoustic metamaterial of multiple parallel hexagonal Helmholtz resonators with sub-wavelength dimensions was designed and optimized in this research. First, the initial geometric parameters of the investigated acoustic metamaterials were confirmed according to the actual noise reduction requirements to reduce the optimization burden and improve the optimization efficiency. Then, the acoustic metamaterial with the various depths of the necks was optimized by the joint simulation method, which combined the finite element simulation and the cuckoo search algorithm. The experimental sample was prepared using the 3D printer according to the obtained optimal parameters. The simulation results and experimental results exhibited excellent consistency. Compared with the derived sound absorption coefficients by theoretical modeling, those achieved in the finite element simulation were closer to the experimental results, which also verified the accuracy of this optimal design method. The results proved that the optimal design method was applicable to the achievement of broadband sound absorption with different low frequency ranges, which provided a novel method for the development and application of acoustic metamaterials.
In order to achieve a balance between sound insulation and ventilation, a novel acoustic metamaterial of air-permeable multiple-parallel-connection folding chambers was proposed in this study that ...was based on Fano-like interference, and its sound-insulation performance was investigated through acoustic finite element simulation. Each layer of the multiple-parallel-connection folding chambers consisted of a square front panel with many apertures and a corresponding chamber with many cavities, which were able to extend both in the thickness direction and in the plane direction. Parametric analysis was conducted for the number of layers
and turns
, the thickness of each layer
, the inner side lengths of the helical chamber
, and the interval
among the various cavities. With the parameters of
= 10,
= 1,
= 10 mm,
= 28 mm, and
= 1 mm, there were 21 sound-transmission-loss peaks in the frequency range 200-1600 Hz, and the sound-transmission loss reached 26.05 dB, 26.85 dB, 27.03 dB, and 33.6 dB at the low frequencies 468 Hz, 525 Hz, 560 Hz, and 580 Hz, respectively. Meanwhile, the corresponding open area for air passage reached 55.18%, which yielded a capacity for both efficient ventilation and high selective-sound-insulation performance.
The mechanical properties of resin samples in low-force stereolithography additive manufacturing were affected by the printing orientation, and were investigated and optimized to achieve excellent ...single or comprehensive tensile strength, compressive strength, and flexural modulus. The resin samples were fabricated using a Form3 3D printer based on light curing technology according to the corresponding national standards, and they were detected using a universal testing machine to test their mechanical properties. The influence of the printing orientation was represented by the rotation angle of the resin samples relative to the x–axis, y–axis and z–axis, and the parameters was selected in the range 0°–90° with an interval of 30°. The multiple regression models for the mechanical properties of the prepared resin samples were obtained based on least square estimation, which offered a foundation from which to optimize the parameters of the printing orientation by cuckoo search algorithm. The optimal parameters for the tensile strength, compressive strength and flexural modulus were ‘α = 45°, β = 25°, γ = 90°’, ‘β = 0°, β = 51°, γ = 85°’ and ‘α = 26°, β = 0°, γ = 90°’, respectively, which obtained the improvements of 80.52%, 15.94%, and 48.85%, respectively, relative to the worst conditions. The mechanism was qualitatively discussed based on the force analysis. The achievements obtained in this study proved that optimization of the printing orientation could improve the mechanical properties of the fabricated sample, which provided a reference for all additive manufacturing methods.
Acoustic metamaterials based on Helmholtz resonance have perfect sound absorption characteristics with the subwavelength size, but the absorption bandwidth is narrow, which limits the practical ...applications for noise control with broadband. On the basis of the Fabry-Perot resonance principle, a novel sound absorber of the acoustic metamaterial by parallel connection of the multiple spiral chambers (abbreviated as MSC-AM) is proposed and investigated in this research. Through the theoretical modeling, finite element simulation, sample preparation and experimental validation, the effectiveness and practicability of the MSC-AM are verified. Actual sound absorption coefficients of the MSC-AM in the frequency range of 360-680 Hz (with the bandwidth Δ
= 320 Hz) are larger than 0.8, which exhibit the extraordinarily low-frequency sound absorption performance. Moreover, actual sound absorption coefficients are above 0.5 in the 350-1600 Hz range (with a bandwidth Δ
= 1250 Hz), which achieve broadband sound absorption in the low-middle frequency range. According to various actual demands, the structural parameters can be adjusted flexibly to realize the customization of sound absorption bandwidth, which provides a novel way to design and improve acoustic metamaterials to reduce the noise with various frequency bands and has promising prospects of application in low-frequency sound absorption.
An acoustic metamaterial absorber of parallel-connection square Helmholtz resonators is proposed in this study, and its sound absorption coefficients are optimized to reduce the noise for the given ...conditions in the factory. A two-dimensional equivalent simulation model is built to obtain the initial value of parameters and a three-dimensional finite element model is constructed to simulate the sound absorption performance of the metamaterial cell, which aims to improve the research efficiency. The optimal parameters of metamaterial cells are obtained through the particle swarm optimization algorithm, and its effectiveness and accuracy are validated through preparing the experimental sample using 3D printing and measuring the sound absorption coefficient by the standing wave tube detection. The consistency between the experimental data and simulation data verifies feasibility of the proposed optimization method and usefulness of the developed acoustic metamaterial absorber, and the desired sound absorption performances for given conditions are achieved. The experimental results prove that parallel-connection square Helmholtz resonators can achieve an adjustable frequency spectrum for the low frequency noise control by parameter optimization, which is propitious to promote its application in reducing the noise in the factory.
The variable noise spectrum for many actual application scenarios requires a sound absorber to adapt to this variation. An adjustable sound absorber of multiple parallel-connection Helmholtz ...resonators with tunable apertures (TA-MPCHRs) is prepared by the low-force stereolithography of photopolymer resin, which aims to improve the applicability of the proposed sound absorber for noise with various frequency ranges. The proposed TA-MPCHR metamaterial contains five metamaterial cells. Each metamaterial cell contains nine single Helmholtz resonators. It is treated as a basic structural unit for an array arrangement. The tunable aperture is realized by utilizing four segments of extendable cylindrical chambers with length
, which indicates that the length of the aperture
is in the range of
, 4
, and that it is tunable. With a certain group of specific parameters for the proposed TA-MPCHR, the influence of the tunable aperture with a variable length is investigated by acoustic finite element simulation with a two-dimensional rotational symmetric model. For the given noise spectrum of certain actual equipment with four operating modes, the TA-MPCHR sample with a limited total thickness of 40 mm is optimized, which is made of photopolymer resin by the low-force stereolithography, and its actual average sound absorption coefficients for the frequency ranges of 500-800 Hz, 550-900 Hz, 600-1000 Hz and 700-1150 Hz reach 0.9203, 0.9202, 0.9436 and 0.9561, respectively. Relative to common non-adjustable metamaterials, the TA-MPCHR made of photopolymer resin can reduce occupied space and improve absorption efficiency, which is favorable in promoting its practical applications in the noise pollution prevention.
Display omitted
•The sound absorption performance of Helmholtz resonator was enhanced by the space division and chamber grouping.•Influences of the division number and grouping number were analyzed ...by the acoustic finite element simulation.•The geometric parameters of multiple divided and grouped Helmholtz resonators were optimized by joint simulation.•Actual sound absorption coefficient in 400–800 Hz above 0.8 and average up to 0.8729 were got with thickness of 40 mm.
Sound absorption performance of the Helmholtz resonator was enhanced by space division and chamber grouping in this research, which aimed to achieve high sound absorption coefficient and broad absorption band simultaneously. Based on acoustic finite element simulation, it could be found that the effective sound absorption frequency band of multiple divided Helmholtz resonators shifted to high frequency direction and the effective absorption bandwidth rose gradually with the increase of division number Ns from 1 to 24, and the effective sound absorption band of multiple divided and grouped Helmholtz resonators with the certain division number Ns would shift to the high frequency direction gradually and its width was improved normally with the increase of grouping number Gs. Moreover, the multiple divided and grouped Helmholtz resonators with division number Ns = 18 and grouping number Gs = 6 was optimized for the certain practical demand, and the optimal geometric parameters were obtained by the joint simulation method incorporating the finite element simulation and the cuckoo search algorithm. Furthermore, its actual sound absorption coefficients were obtained through sample fabrication by the additive manufacturing and standing wave tube measurement by the AWA6290T, and all the actual sound absorption coefficients in 400–800 Hz were above 0.8 and the average value in this range was up to 0.8729 with limited total thickness of 40 mm. Enhancement of the sound absorption performance of multiple divided and grouped Helmholtz resonators would be favorable to promote the practical applications of acoustic metamaterials in the noise reduction field.
Abstract
Microperforated panel absorber was widely used in the fields of noise reduction and sound absorption, because it had the extraordinary advantages. As deformation of the standard ...microperforated panel, inclined microperforated panel absorber was proposed and investigated in this research. The theoretical sound absorption model of the inclined microperforated panel absorber was constructed on the basement of the Maa’s theory according to the electro-acoustic theory. Structural parameters of the inclined microperforated panel absorber were optimized on the basement of the constructed theoretical sound absorption model through the cuckoo search algorithm. The finite element simulation model of the inclined microperforated panel absorber with optimal parameters was built in the virtual acoustic laboratory, which could be considered as an effective method to measure and check the sound absorption performance of the inclined microperforated panel absorber. Through the theoretical modeling, parameter optimization, and finite element simulation, sound absorption performance of the inclined microperforated panel absorber was improved, which could be propitious to promote its practical applications in the fields of noise reduction and sound absorption.
PDF
