Between the sheets: Sodium‐ion batteries are an attractive, low‐cost alternative to lithium‐ion batteries. Nitrogen‐doped porous carbon sheets are prepared by chemical activation of ...polypyrrole‐functionalized graphene sheets. When using the sheets as anode material in sodium‐ion batteries, their unique compositional and structural features result in high reversible capacity, good cycling stability, and high rate capability.
Transition‐metal phosphides (TMPs) have emerged as promising catalyst candidates for the hydrogen evolution reaction (HER). Although numerous methods have been investigated to obtain TMPs, most rely ...on traditional synthetic methods that produce materials that are inherently deficient with respect to electrical conductivity. An electrospinning‐based reduction approach is presented, which generates nickel phosphide nanoparticles in N‐doped porous carbon nanofibers (Ni2P@NPCNFs) in situ. Ni2P nanoparticles are protected from irreversible fusion and aggregation in subsequent high‐temperature pyrolysis. The resistivity of Ni2P@NPCNFs (5.34 Ω cm) is greatly decreased by 104 times compared to Ni2P (>104 Ω cm) because N‐doped carbon NFs are incorporated. As an electrocatalyst for HER, Ni2P@NPCNFs reveal remarkable performance compared to other previously reported catalysts in acidic media. Additionally, it offers excellent catalytic ability and durability in both neutral and basic media. Encouraged by the excellent electrocatalytic performance of Ni2P@NPCNFs, a series of pea‐like MxP@NPCNFs, including Fe2P@NPCNFs, Co2P@NPCNFs, and Cu3P@NPCNFs, were synthesized by the same method. Detailed characterization suggests that the newly developed method could render combinations of ultrafine metal phosphides with porous carbon accessible; thereby, extending opportunities in electrocatalytic applications.
Like peas in a pod: An electrospinning‐based reduction approach was used to embed metal phosphide nanoparticles in nitrogen‐doped porous carbon nanofibers (NPCNFs). A series of pea‐like MxP@NPCNFs structures were fabricated (MxP=Ni2P, Fe2P, Co2P, and Cu3P). Ni2P@NPCNFs is a highly active catalyst for the hydrogen evolution reaction at all pH values.
The radius-luminosity ( ) relationship of active galactic nuclei (AGNs) established by the reverberation mapping (RM) observations has been widely used as a single-epoch black hole mass estimator in ...the research of large AGN samples. However, the recent RM campaigns discovered that the AGNs with high-accretion rates show shorter time lags by factors of a few comparing with the predictions from the relationship. The explanation of the shortened time lags has not been finalized yet. We collect eight different single-epoch spectral properties to investigate how the shortening of the time lags correlates with those properties and to determine the origin of the shortened lags. We find that the flux ratio between Fe ii and Hβ emission lines shows the most prominent correlation, thus confirming that accretion rate is the main driver for the shortened lags. In addition, we establish a new scaling relation including the relative strength of Fe ii emission. This new scaling relation can provide less biased estimates of the black hole mass and accretion rate from the single-epoch spectra of AGNs.
We process rigorously GPS data observed during the past 25 years from continental China to derive site secular velocities. Analysis of the velocity solution leads to the following results. (a) The ...deformation field inside the Tibetan plateau and Tien Shan is predominantly continuous, and large deformation gradients only exist perpendicular to the Indo‐Eurasian relative plate motion and are associated with a few large strike‐slip faults. (b) Lateral extrusions occur on both the east and west sides of the plateau. The westward extrusion peaks at ~6 mm/yr in the Pamir‐Hindu Kush region. A bell‐shaped eastward extrusion involves most of the plateau at a maximum rate of ~20 mm/yr between the Jiali and Ganzi‐Yushu faults, and the pattern is consistent with gravitational flow in southern and southeastern Tibet where the crust shows widespread dilatation at 10–20 nanostrain/yr. (c) The southeast borderland of Tibet rotates clockwise around the eastern Himalaya syntaxis, with sinistral and dextral shear motions along faults at the outer and inner flanks of the rotation terrane. The result suggests gravitational flow accomplished through rotation and translation of smaller subblocks in the upper crust. (d) Outside of the Tibetan plateau and Tien Shan, deformation field is block‐like. However, unnegligible internal deformation on the order of a couple of nanostrain/yr is found for all blocks. The North China block, under a unique tectonic loading environment, deforms and rotates at rates significantly higher than its northern and southern neighboring blocks, attesting its higher seismicity rate and earthquake hazard potential than its neighbors.
Key Points
Production of a GPS velocity solution in China with rigorous processing and accounting for effects of large earthquakes
Comprehensive analysis of distributed deformation within Tibetan plateau and Tien Shan and block‐like deformation for the rest of region
Quantification of two‐way extrusion of Tibetan plateau and clockwise rotation of its southeast borderland
LiNi
Mn
Co
O
-layered cathode is often fabricated in the form of secondary particles, consisting of densely packed primary particles. This offers advantages for high energy density and alleviation of ...cathode side reactions/corrosions, but introduces drawbacks such as intergranular cracking. Here, we report unexpected observations on the nucleation and growth of intragranular cracks in a commercial LiNi
Mn
Co
O
cathode by using advanced scanning transmission electron microscopy. We find the formation of the intragranular cracks is directly associated with high-voltage cycling, an electrochemically driven and diffusion-controlled process. The intragranular cracks are noticed to be characteristically initiated from the grain interior, a consequence of a dislocation-based crack incubation mechanism. This observation is in sharp contrast with general theoretical models, predicting the initiation of intragranular cracks from grain boundaries or particle surfaces. Our study emphasizes that maintaining structural stability is the key step towards high-voltage operation of layered-cathode materials.
Hydrogen produced
via
water electrolysis can act as an ideal clean chemical fuel with superb gravimetric energy density and high energy conversion efficiency, solving the problems of conventional ...fossil fuel exhaustion and environmental contamination. Transition metal sulfides (TMS) have been extensively explored as effective, widely available alternatives to precious metals in overall water splitting. Herein, recent advances, covering preparation methods, intrinsic electrocatalytic performance, and optimization strategies, relating to TMS-based bifunctional electrocatalysts have been summarized systematically and comprehensively. Firstly, a general introduction to the reaction mechanisms and key parameters of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is provided. Next, the physicochemical properties of TMS and typical synthesis methods are introduced to give guidance for fabricating TMS materials with well-defined structures, controllable compositions, and excellent performance. Importantly, the intrinsic activities of TMS-based electrocatalysts and several strategies for improving their bifunctional electrocatalytic performance during water electrolysis are discussed in detail. Finally, perspectives covering the challenges and opportunities related to the further development of TMS-based materials with high activity and long-term durability for overall water splitting are given. The aim herein is to provide guidelines for the design and fabrication of TMS-based bifunctional electrocatalysts with excellent performance and to accelerate their large-scale practical application in water electrolysis.
This review summarizes recent advances relating to transition metal sulfide (TMS)-based bifunctional electrocatalysts, providing guidelines for the design and fabrication of TMS-based catalysts for practical application in water electrolysis.
This review describes unique neuromodulatory influences on working memory prefrontal cortical (PFC) circuits that coordinate cognitive strength with arousal state. Working memory arises from ...recurrent excitation within layer III PFC pyramidal cell NMDA circuits, which are afflicted in aging and schizophrenia. Neuromodulators rapidly and flexibly alter the efficacy of these synaptic connections, while leaving the synaptic architecture unchanged, a process called dynamic network connectivity (DNC). Increases in calcium-cAMP signaling open ion channels in long, thin spines, gating network connections. Inhibition of calcium-cAMP signaling by stimulating α2A-adrenoceptors on spines strengthens synaptic efficacy and increases network firing, whereas optimal stimulation of dopamine D1 receptors sculpts network inputs to refine mental representation. Generalized increases in calcium-cAMP signaling during fatigue or stress disengage dlPFC recurrent circuits, reduce firing and impair top-down cognition. Impaired DNC regulation contributes to age-related cognitive decline, while genetic insults to DNC proteins are commonly linked to schizophrenia.
Arnsten et al. discuss dynamic network connectivity (DNC), a process by which neuromodulators alter the efficacy of synaptic connections in working memory PFC circuits. Impaired DNC regulation contributes to age-related cognitive decline, while genetic insults to DNC proteins are linked to schizophrenia.
PDF
