Sensitivity and pressure range are two significant parameters of pressure sensors. Existing pressure sensors have difficulty achieving both high sensitivity and a wide pressure range. Therefore, we ...propose a new pressure sensor with a ternary nanocomposite Fe
O
/C@SnO
. The sea urchin-like Fe
O
structure promotes signal transduction and protects Fe
O
needles from mechanical breaking, while the acetylene carbon black improves the conductivity of Fe
O
. Moreover, one part of the SnO
nanoparticles adheres to the surfaces of Fe
O
needles and forms Fe
O
/SnO
heterostructures, while its other part disperses into the carbon layer to form SnO
@C structure. Collectively, the synergistic effects of the three structures (Fe
O
/C, Fe
O
/SnO
and SnO
@C) improves on the limited pressure response range of a single structure. The experimental results demonstrate that the Fe
O
/C@SnO
pressure sensor exhibits high sensitivity (680 kPa
), fast response (10 ms), broad range (up to 150 kPa), and good reproducibility (over 3500 cycles under a pressure of 110 kPa), implying that the new pressure sensor has wide application prospects especially in wearable electronic devices and health monitoring.
Inflammatory mechanisms play important roles in intracerebral hemorrhage (ICH) and have been linked to the development of stroke-associated pneumonia (SAP). The neutrophil-to-lymphocyte ratio (NLR), ...systemic immune-inflammation index (SII), platelet-to-lymphocyte ratio (PLR) and systemic inflammation response index (SIRI) are inflammatory indexes that influence systemic inflammatory responses after stroke. In this study, we aimed to compare the predictive value of the NLR, SII, SIRI and PLR for SAP in patients with ICH to determine their application potential in the early identification of the severity of pneumonia.
Patients with ICH in four hospitals were prospectively enrolled. SAP was defined according to the modified Centers for Disease Control and Prevention criteria. Data on the NLR, SII, SIRI and PLR were collected at admission, and the correlation between these factors and the clinical pulmonary infection score (CPIS) was assessed through Spearman's analysis.
A total of 320 patients were enrolled in this study, among whom 126 (39.4%) developed SAP. The results of the receiver operating characteristic (ROC) analysis revealed that the NLR had the best predictive value for SAP (AUC: 0.748, 95% CI: 0.695-0.801), and this outcome remained significant after adjusting for other confounders in multivariable analysis (RR=1.090, 95% CI: 1.029-1.155). Among the four indexes, Spearman's analysis showed that the NLR was the most highly correlated with the CPIS (r=0.537, 95% CI: 0.395-0.654). The NLR could effectively predict ICU admission (AUC: 0.732, 95% CI: 0.671-0.786), and this finding remained significant in the multivariable analysis (RR=1.049, 95% CI: 1.009-1.089, P=0.036). Nomograms were created to predict the probability of SAP occurrence and ICU admission. Furthermore, the NLR could predict a good outcome at discharge (AUC: 0.761, 95% CI: 0.707-0.8147).
Among the four indexes, the NLR was the best predictor for SAP occurrence and a poor outcome at discharge in ICH patients. It can therefore be used for the early identification of severe SAP and to predict ICU admission.
Oxidative coupling and oxidative rearrangement are two of the most common biosynthetic strategies to form diaryl ethers. In contrast, enzymatic diaryl ether generation that proceeds in a nonoxidative ...manner has not been characterized thus far. Here, we discovered a versatile thioesterase (TE) domain from the nonreducing polyketide synthase (nrPKS) AN7909, which catalyzes diaryl ether formation through a series of successive steps involving esterification, a Smiles rearrangement, and hydrolysis. Further mutations and biochemical analyses with synthetic mimic substrates provide insight into the proposed catalytic process of the TE domain.
In wireless sensor networks, nodes in the area of interest must report sensing readings to the sink, and this report always satisfies the report frequency required by the sink. This paper proposes a ...link-aware clustering mechanism, called LCM, to determine an energy-efficient and reliable routing path. The LCM primarily considers node status and link condition, and uses a novel clustering metric called the predicted transmission count (PTX), to evaluate the qualification of nodes for clusterheads and gateways to construct clusters. Each clusterhead or gateway candidate depends on the PTX to derive its priority, and the candidate with the highest priority becomes the clusterhead or gateway. Simulation results validate that the proposed LCM significantly outperforms the clustering mechanisms using random selection and by considering only link quality and residual energy in the packet delivery ratio, energy consumption, and delivery latency.
Flexible piezoresistive pressure sensors have been extensively used in the field of wearable sensors. However, it is difficult to achieve both ultrahigh sensitivity and pressure range, with ...traditional pressure sensors. Therefore, a new Co3O4/carbon felt pressure sensor is proposed here, where Co3O4 as nanospacer provides low initial current without loading. Carbon felt with a rough surface as a flexible substrate provides a high output current under loading and extends the measurement range of the pressure sensors. The high sensitivity of the pressure sensors can be achieved with a low initial current and high output current. The Co3O4/carbon felt pressure sensors exhibit high sensitivity (243 kPa−1), ultralow detection limit (1.3 Pa), fast response (14 ms), and broad range (up to 180 kPa) of measurements. These excellent performances indicate that the Co3O4/carbon felt pressure sensor has great potential for application in wearable, healthcare devices. Furthermore, this strategy can be extended to the fabrication of other metal oxides/carbon felt pressure sensors.
Metal oxides/carbon felt pressure sensors are synthesized via a one‐step hydrothermal method with further annealing. Carbon felt surface has a rich microstructure, which can increase the contact resistance with the electrode. Metal oxides are used as spacers for carbon fibers. Pressure sensors achieve low initial current without loading and high output current under loading, respectively, thus achieving excellent performance.
The different hydrogen bond interactions in two organic-inorganic hybrid manganese halide compounds, namely A
2
MnBr
4
(A =
N
-butyl-
N
-methylpyrrolidinium (P14
+
) for (
1
) and
N
-butyl-
N
...-methylpiperidinium (PP14
+
) for (
2
)), lead to distinct photoluminescence quantum yields (81% for
1
; 55% for
2
). Further applications of luminescent
1
are also developed.
The difference in the hydrogen bonding interactions originating from different organic cations brings photoluminescence with distinct quantum yields.
Atherosclerosis (AS) is chronic pathological process based on the inflammatory reaction associated with factors including vascular endothelial dysfunction, inflammation, and autoimmunity. ...Inflammasomes are known to be at the core of the inflammatory response. As a pattern recognition receptor of innate immunity, the NLRP3 inflammasome mediates the secretion of inflammatory factors by activating the Caspase-1, which is important for maintaining the immune system and regulating the gut microbiome, and participates in the occurrence and development of AS. The intestinal microecology is composed of a large number of complex structures of gut microbiota and its metabolites, which play an important role in AS. The gut microbiota and its metabolites regulate the activation of the NLRP3 inflammasome. Targeting the NLRP3 inflammasome and regulating intestinal microecology represent a new direction for the treatment of AS. This paper systematically reviews the interaction between the NLRP3 inflammasome and gut microbiome in AS, strategies for targeting the NLRP3 inflammasome and gut microbiome for the treatment of AS, and provides new ideas for the research and development of drugs for the treatment of AS.
Display omitted
Vascular endothelial dysfunction (VED) and inflammation contribute to the initiation and progression of atherosclerosis. Melatonin (MLT) normalizes lipid profile, improves endothelial function, and ...possesses anti‐inflammatory properties. However, the precise mechanisms are still unclear. This study investigated whether MLT could ameliorate VED, inflammation, and atherosclerosis by suppressing the Toll‐like receptor 4 (TLR4)/nuclear factor kappa B (NF‐κB) system in high‐fat‐fed rabbits. Rabbits were randomly divided into three groups that received a standard diet (control group), high‐cholesterol diet (atherosclerosis group), or high‐cholesterol diet plus 10 mg/kg/day MLT (MLT group) for 12 wk. After treatment, high‐fat diet significantly increased serum lipid and inflammatory markers in rabbits in atherosclerosis group compared with that in control group. In addition, high‐fat diet also induced VED and typical atherosclerotic plaque formation and increased intima/media thickness ratio, which were significantly improved by MLT therapy as demonstrated in MLT group. Histological and immunoblot analysis further showed that high‐fat diet enhanced the expressions of TLR4, myeloid differentiation primary response protein (MyD88), and NF‐κB p65, but decreased inhibitor of NF‐κB (IκB) expression. By contrast, MLT therapy decreased the expressions of TLR4, MyD88, and NF‐κB p65 and increased IκB expression. This study has demonstrated that MLT ameliorates lipid metabolism, VED, and inflammation and inhibits the progression of atherosclerosis in high‐fat‐fed rabbits. Moreover, our study indicates for the first time that suppression of the TLR4/NF‐κB system in local vasculature with atherosclerotic damage is important for the protective effects of MLT.
Flexible pressure sensors arouse an extensive interest in health monitoring, human-computer interaction, and wearable electronic devices. However, the preparation of pressure sensors with high ...sensitivity, high linearity, and wide working range continues to be challenging. In this study, a SnO2@carbon nanotubes/polyurethane (SnO2@CNT/PU) sponge pressure sensor was presented with high sensitivity in a wide linear pressure range. SnO2 was attached to CNT/PU sponge, which allowed the pressure sensor to obtain low initial current, thus increasing the sensitivity of the pressure sensor. The applied compressive strain was linearly related to the resistance since the nodes of CNT/PU sponge porous skeleton change synchronously during contact. SnO2@CNT/PU sponge pressure sensor shows a wide pressure range (3 Pa–30 kPa), while maintaining high sensitivity (53.4 kPa−1), and excellent linearity (R2 = 0.996). Furthermore, the sensor exhibited stable cycle performance (1500 cycles), fast response time (23 ms), as well as low detection limit (3 Pa). More importantly, the pressure sensor is capable of accurately detecting the human body's physiological signals, and shows promising application for health monitoring.
The successful treatment of infected wounds requires strategies with effective antimicrobial, anti-inflammatory, and healing-promoting properties. Accordingly, the use of Cu2+ and tetracycline (TC), ...which can promote angiogenesis, re-epithelialization, and collagen deposition, also antibacterial activity, at the wound site, has shown application prospects in promoting infected wound repair. However, realizing controllable release to prolong action time and avoid potential toxicities is critical. Moreover, near-infrared light (NIR)-activated mesoporous polydopamine nanoparticles (MPDA NPs) reportedly exert anti-inflammatory effects by eliminating the reactive oxygen species generated during inflammatory responses. In this study, we assess whether Cu2+ and TC loaded in MPDA NPs can accelerate infected wound healing in mice. In particular, Cu2+ is chelated and immobilized on the surface of MPDA NPs, while a thermosensitive phase-change material (PCM; melting point: 39–40 °C), combined with antibiotics, was loaded into the MPDA NPs as a gatekeeper (PPMD@Cu/TC). Results show that PPMD@Cu/TC exhibits significant great photothermal properties with NIR irradiation, which induces the release of Cu2+, while inducing PCM melting and, subsequent, TC release. In combination with anti-inflammatory therapy, NIR-triggered Cu2+ and TC release enables the nanocomposite to eradicate bacterial wound infections and accelerate healing. Importantly, negligible damage to primary organs and satisfactory biocompatibility were observed in the murine model. Collectively, these findings highlight the therapeutic potential of this MPDA-based platform for controlling bacterial infection and accelerating wound healing.
PDF
