As a key type of emerging thermoelectric material, tin telluride (SnTe) has received extensive attention because of its low toxicity and eco‐friendly nature. The recent trend shows that band ...engineering and nanostructuring can enhance thermoelectric performance of SnTe as intermediate temperature (400–800 K) thermoelectrics, which provides an alternative for toxic PbTe with the same operational temperature. This review highlights the key strategies to enhance the thermoelectric performance of SnTe materials through band engineering, carrier concentration optimization, synergistic engineering, and structure design. A fundamental analysis elucidates the underpinnings for the property improvement. This comprehensive review will boost the relevant research with a view to work on further performance enhancement of SnTe materials.
SnTe qualifies as an eco‐friendly alternative to medium‐temperature thermoelectric PbTe by showing robust potential as high‐performance thermoelectrics via effective strategies through band engineering, carrier concentration optimization, synergistic engineering, and structure design.
Chlorine disinfection to drinking water plays an important role in preventing and controlling waterborne disease outbreaks globally. Nevertheless, little is known about why it enriches the antibiotic ...resistance genes (ARGs) in bacteria after chlorination. Here, ARGs released from killed antibiotic-resistant bacteria (ARB), and culturable chlorine-injured bacteria produced in the chlorination process as the recipient, were investigated to determine their contribution to the horizontal transfer of ARGs during disinfection treatment. We discovered Escherichia coli, Salmonella aberdeen, Pseudomonas aeruginosa and Enterococcus faecalis showed diverse resistance to sodium hypochlorite, and transferable RP4 could be released from killed sensitive donor consistently. Meanwhile, the survival of chlorine-tolerant injured bacteria with enhanced cell membrane permeabilisation and a strong oxidative stress-response demonstrated that a physiologically competent cell could be transferred by RP4 with an improved transformation frequency of up to 550 times compared with the corresponding untreated bacteria. Furthermore, the water quality factors involving chemical oxygen demand (COD
), ammonium nitrogen and metal ions (Ca
and K
) could significantly promote above transformation frequency of released RP4 into injured E. faecalis. Our findings demonstrated that the chlorination process promoted the horizontal transfer of plasmids by natural transformation, which resulted in the exchange of ARGs across bacterial genera and the emergence of new ARB, as well as the transfer of chlorine-injured opportunistic pathogen from non-ARB to ARB. Considering that the transfer elements were quite resistant to degradation through disinfection, this situation poses a potential risk to public health.
Due to the nature of their liquid‐like behavior and high dimensionless figure of merit, Cu2X (X = Te, Se, and S)‐based thermoelectric materials have attracted extensive attention. The superionicity ...and Cu disorder at the high temperature can dramatically affect the electronic structure of Cu2X and in turn result in temperature‐dependent carrier‐transport properties. Here, the effective strategies in enhancing the thermoelectric performance of Cu2X‐based thermoelectric materials are summarized, in which the proper optimization of carrier concentration and minimization of the lattice thermal conductivity are the main focus. Then, the stabilities, mechanical properties, and module assembly of Cu2X‐based thermoelectric materials are investigated. Finally, the future directions for further improving the energy conversion efficiency of Cu2X‐based thermoelectric materials are highlighted.
Deriving from their high performance and eco‐friendliness, superionic Cu2X‐based thermoelectric materials are attracting ever‐increasing attention. A comprehensive summary of the understanding of the superionicity, performance enhancement strategies, and material stability design can set up a solid foundation for future development. Pointing out the development challenges can better guide future studies.
The urgent need for ecofriendly, stable, long‐lifetime power sources is driving the booming market for miniaturized and integrated electronics, including wearable and medical implantable devices. ...Flexible thermoelectric materials and devices are receiving increasing attention, due to their capability to convert heat into electricity directly by conformably attaching them onto heat sources. Polymer‐based flexible thermoelectric materials are particularly fascinating because of their intrinsic flexibility, affordability, and low toxicity. There are other promising alternatives including inorganic‐based flexible thermoelectrics that have high energy‐conversion efficiency, large power output, and stability at relatively high temperature. Herein, the state‐of‐the‐art in the development of flexible thermoelectric materials and devices is summarized, including exploring the fundamentals behind the performance of flexible thermoelectric materials and devices by relating materials chemistry and physics to properties. By taking insights from carrier and phonon transport, the limitations of high‐performance flexible thermoelectric materials and the underlying mechanisms associated with each optimization strategy are highlighted. Finally, the remaining challenges in flexible thermoelectric materials are discussed in conclusion, and suggestions and a framework to guide future development are provided, which may pave the way for a bright future for flexible thermoelectric devices in the energy market.
A comprehensive exploration of the material design strategies, processing methods, and underlying physics and chemistry behind the enhanced thermoelectric properties of flexible thermoelectric materials is presented, emphasizing innovative approaches and suggesting future pathways for the development of a new generation of wearable electronics.
Owing to the sustainability, environmental friendliness, and structural diversity of biomass‐derived materials, extensive efforts have been devoted to use them as energy storage materials in ...high‐energy rechargeable batteries. A timely and comprehensive review from the structures to mechanisms will significantly widen this research field. Here, it starts with the operation mechanism of batteries, and it aims to summarize the latest advances for biomass‐derived carbon to achieve high‐energy battery materials, including activation carbon methods and the structural classification of biomass‐derived carbon materials from zero dimension, one dimension, two dimension, and three dimension. Each strategy starts with carefully selected examples and then moves to illustrate the underlying transport mechanism of electrons in the structure. In the end, challenges, strategies, and outlooks are pointed out for the future development of biomass‐derived carbon materials. Overall, this review will help researchers choose appropriate strategies to design biomass‐derived carbon materials, thereby promoting the application of biomass materials in battery design.
This review comprehensively summarizes the internal structure of biomass‐derived carbon materials, which aims to provide suitable environment‐friendly and low consumption green materials for high‐performance batteries design.
GeTe with rhombohedral‐to‐cubic phase transition is a promising lead‐free thermoelectric candidate. Herein, theoretical studies reveal that cubic GeTe has superior thermoelectric behavior, which is ...linked to (1) the two valence bands to enhance the electronic transport coefficients and (2) stronger enharmonic phonon–phonon interactions to ensure a lower intrinsic thermal conductivity. Experimentally, based on Ge1−xSbxTe with optimized carrier concentration, a record‐high figure‐of‐merit of 2.3 is achieved via further doping with In, which induces the distortion of the density of states near the Fermi level. Moreover, Sb and In codoping reduces the phase‐transition temperature to extend the better thermoelectric behavior of cubic GeTe to low temperature. Additionally, electronic microscopy characterization demonstrates grain boundaries, a high‐density of stacking faults, and nanoscale precipitates, which together with the inevitable point defects result in a dramatically decreased thermal conductivity. The fundamental investigation and experimental demonstration provide an important direction for the development of high‐performance Pb‐free thermoelectric materials.
An ultrahigh figure‐of‐merit of 2.3 is achieved in Ge0.89Sb0.1In0.01Te through enhancing the power‐factor and decreasing the thermal conductivity. The enhanced power‐factor is caused by the optimized carrier concentration, reduced phase‐transition temperature, and introduced resonant‐energy doping. The decreased thermal conductivity is due to the enhanced phonon scattering by the intrinsically deformed phonon transport and the externally induced phonon scattering sources.
•Native waxy corn starch was treated by ultrasound treatment.•The molecular structure and physical properties of ultrasonicated waxy corn starch were characterized.•Higher population of A chain, ...lower proportion of B1,B2 and B3 chains were observed in ultrasonicated waxy corn starch.•α-(1,6) glycosidic linkages were destroyed easily than α-(1,4) glycosidic linkages.•The molecular structure of amylopectin is a critical factor in determining physicochemical properties of waxy corn starch.
As a simple and effective physical method, ultrasound irradiation has been used to modify starch. Native waxy corn starch was treated by ultrasound irradiation at 100 and 400 W in this study. Compared with native waxy corn starch, lower proportion of B1, B2, and B3, higher proportion of A chain were observed in ultrasonicated waxy corn starch. 1H NMR combined with HPSEC-MALLS-RI data showed that lower degree of branching was observed in ultrasonicated waxy corn starch, and α-1,4 glycosidic linkages were more stable than α-1,6 glycosidic linkages in waxy corn starches. 13C NMR data indicated that the content of double helices was decreased, and single helix and amorphous components were increased after ultrasound irradiation. The A-type crystal structure was scarcely affected according to X-ray diffraction (XRD) analysis. The granule surface of ultrasonicated waxy corn starch became notch and rough fragment, and lower particle diameter was observed in ultrasonicated waxy corn starch. These results demonstrated that ultrasound irradiation affected chain length distribution, double helices, single helices and amorphous state, especially α-1,4 glycosidic linkages and α-1,6 glycosidic linkages, of waxy corn starch.
Display omitted
With the ever-growing development of multifunctional and miniature electronics, the exploring of high-power microwatt-milliwatt self-charging technology is highly essential. Flexible ...thermoelectric materials and devices, utilizing small temperature difference to generate electricity, exhibit great potentials to provide the continuous power supply for wearable and implantable electronics. In this review, we summarize the recent progress of flexible thermoelectric materials, including conducting polymers, organic/inorganic hybrid composites, and fully inorganic materials. The strategies and approaches for enhancing the thermoelectric properties of different flexible materials are detailed overviewed. Besides, we highlight the advanced strategies for the design of mechanical robust flexible thermoelectric devices. In the end, we point out the challenges and outlook for the future development of flexible thermoelectric materials and devices.
Due to its similar elastic modulus of human bones, polyetheretherketone (PEEK) has been considered as an excellent cytocompatible material. However, the bioinertness, poor osteoconduction, and weak ...antibacterial activity of PEEK limit its wide applications in clinics. In this study, a facile strategy is developed to prepare graphene oxide (GO) modified sulfonated polyetheretherketone (SPEEK) (GO‐SPEEK) through a simple dip‐coating method. After detailed characterization, it is found that the GO closely deposits on the surface of PEEK, which is attributed to the π–π stacking interaction between PEEK and GO. Antibacterial tests reveal that the GO‐SPEEK exhibits excellent suppression toward Escherichia coli. In vitro cell attachment, growth, differentiation, alkaline phosphatase activity, quantitative real‐time polymerase chain reaction analyses, and calcium mineral deposition all illustrate that the GO‐SPEEK substrate can significantly accelerate the proliferation and osteogenic differentiation of osteoblast‐like MG‐63 cells compared with those on PEEK and SPEEK groups. These results suggest that the GO‐SPEEK has an improved antibacterial activity and cytocompatibility in vitro, showing that the developed GO‐SPEEK has a great potential as the bioactive implant material in bone tissue engineering.
A facile strategy is used to produce a novel graphene oxide (GO) decorated sulfonated polyetheretherketone (SPEEK) biomaterial through dip‐coating approach. The results demonstrate that the GO is successfully absorbed on the SPEEK surface through π–π stacking interaction, and the biomaterial exhibits superior antibacterial ability, cytocompatibility, and osteogenic activity.
PDF
