Display omitted
With a continuously increasing aging population and the improvement of living standards, large demands of biomaterials are expected for a long time to come. Further development of ...novel biomaterials, that are much safer and of much higher quality, in terms of both biomedical and mechanical properties, are therefore of great interest for both the research scientists and clinical surgeons. Compared with the conventional crystalline metallic counterparts, bulk metallic glasses have unique amorphous structures, and thus exhibit higher strength, lower Young’s modulus, improved wear resistance, good fatigue endurance, and excellent corrosion resistance. For this purpose, bulk metallic glasses (BMGs) have recently attracted much attention for biomedical applications. This review discusses and summarizes the recent developments and advances of bulk metallic glasses, including Ti-based, Zr-based, Fe-based, Mg-based, Zn-based, Ca-based and Sr-based alloying systems for biomedical applications. Future research directions will move towards overcoming the brittleness, increasing the glass forming ability (GFA) thus obtaining corresponding bulk metallic glasses with larger sizes, removing/reducing toxic elements, and surface modifications.
Bulk metallic glasses (BMGs), also known as amorphous alloys or liquid metals, are relative newcomers in the field of biomaterials. They have gained increasing attention during the past decades, as they exhibit an excellent combination of properties and processing capabilities desired for versatile biomedical implant applications. The present work reviewed the recent developments and advances of biomedical BMGs, including Ti-based, Zr-based, Fe-based, Mg-based, Zn-based, Ca-based and Sr-based BMG alloying systems. Besides, the critical analysis and in-depth discussion on the current status, challenge and future development of biomedical BMGs are included. The possible solution to the BMG size limitation, the brittleness of BMGs has been proposed.
This study further evaluated the
and
anti-
activities and potential underlying mechanism of patchouli alcohol (PA), a tricyclic sesquiterpene. In the
assay, the capacities of PA to inhibit and kill
...were tested on three standard strains at different pH values and on 12 clinical isolates. The effects of PA on
adhesion (and its
,
, and
genes), motility (and its
and
genes), ultrastructure, and flagellation were investigated. Moreover, the
resistance to and postantibiotic effect (PAE) of PA were determined. Furthermore, the
effects of PA on
eradication and gastritis were examined. Results showed that MICs of PA against three standard strains (pH 5.3 to 9) and 12 clinical isolates were 25 to 75 and 12.5 to 50 μg/ml, respectively. The killing kinetics of PA were time and concentration dependent, and its minimal bactericidal concentrations (MBCs) were 25 to 75 μg/ml. In addition,
adhesion, motility, ultrastructure, and flagellation were significantly suppressed. PA also remarkably inhibited the expression of adhesion genes (
and
) and motility genes (
and
). Furthermore, PA treatment caused a longer PAE and less bacterial resistance than clarithromycin and metronidazole. The
study showed that PA can effectively eradicate
, inhibit gastritis, and suppress the expression of inflammatory mediators (COX-2, interleukin 1β, tumor necrosis factor alpha, and inducible nitric oxide synthase iNOS). In conclusion, PA can efficiently kill
, interfere with its infection process, and attenuate gastritis with less bacterial resistance, making it a potential candidate for new drug development.
Migmatite gneisses are widespread in the Dabie orogen, but their formation ages are poorly constrained. Eight samples of migmatite, including leucosome, melanosome, and banded gneiss, were selected ...for U–Pb dating and Hf isotope analysis. Most metamorphic zircon occurs as overgrowths around inherited igneous cores or as newly grown grains. Morphological and internal structure features suggest that their growth is associated with partial melting. According to the Hf isotope ratio relationships between metamorphic zircon and inherited cores, three formation mechanisms for metamorphic zircon can be determined, which are dissolution–reprecipitation of pre‐existing zircon, breakdown of Zr‐bearing phase other than zircon in a closed system and crystallization from externally derived Zr‐bearing melt. Four samples contain magmatic zircon cores, yielding upper intercept U–Pb ages of 807 ± 35–768 ± 12 Ma suggesting that the protoliths of the migmatites are Neoproterozoic in age. The migmatite zircon yields weighted mean two‐stage Hf model ages of 2513 ± 97–894 ± 54 Ma, indicating reworking of both juvenile and ancient crustal materials at the time of their protolith formation. The metamorphic zircons give U–Pb ages of 145 ± 2–120 ± 2 Ma. The oldest age indicates that partial melting commenced prior to 145 Ma, which also constrains the onset of extensional tectonism in this region to pre‐145 Ma. The youngest age of 120 Ma was obtained from an undeformed granitic vein, indicating that deformation in this area was complete at this time. Two major episodes of partial melting were dated at 139 ± 1 and 123 ± 1Ma. The first episode of partial melting is obviously older than the timing of post‐collision magmatism, corresponding to regional extension. The second episode of partial melting is coeval with the widespread post‐collision magmatism, indicating the gravitational collapse and delamination of the orogenic lithospheric keel of the Dabie orogen, which were possibly triggered by the uprising of the Cretaceous mid‐Pacific superplume.
Several types of multiphase solid (MS) inclusions are identified in garnet from ultrahigh‐pressure (UHP) eclogite in the Dabie orogen. The mineralogy of MS inclusions ranges from pure K‐feldspar to ...pure quartz, with predominance of intermediate types consisting of K‐feldspar + quartz ± silicate (plagioclase or epidote) ± barite. The typical MS inclusions are usually surrounded with radial cracks in the host garnet, similar to where garnet contains relict coesite. Barite aggregates display significant heterogeneity in major element composition, with total contents of only 57–73% and highly variable SiO2 contents of 0.32–25.85% that are positively correlated with BaO and SO3 contents. The occurrence of MS inclusions provides petrographic evidence for partial melting in the UHP metamorphic rock. The occurrence of barite aggregates with variably high SiO2 contents suggests the coexistence of aqueous fluid with hydrous melt under HP eclogite facies conditions. Thus, local dehydration melting is inferred to take place inside the UHP metamorphic slice during continental collision. This is ascribed to phengite breakdown during ‘hot’ exhumation of the deeply subducted continental crust. As a consequence, the aqueous fluid is internally buffered in chemical composition and its local sink is a basic trigger to the partial melting during the continental subduction‐zone metamorphism.
Petrological evidence is provided for anatexis of ultrahigh‐pressure (UHP) metamorphic quartzite in the Sulu orogen. Some feldspar grains exhibit elongated, highly cuspate shapes or occur as ...interstitial, cuspate phases constituting interconnected networks along grain boundaries. Elongated veinlets composed of plagioclase + quartz ± K‐feldspar also occur in grain boundaries. These features provide compelling evidence for anatexis of the UHP quartzite. Zircon grains from impure quartzite are all metamorphic growth with highly irregular shape. They contain inclusions of coesite, jadeite, rutile and lower pressure minerals, including multiphase solid inclusions that are composed of two or more phases of muscovite, quartz, K‐feldspar and plagioclase. All zircon grains exhibit steep REE patterns, similar U–Pb ages and Hf isotope compositions with a weighted mean of 218 ± 2 Ma. Most grains have similar δ18O values of −0.6 to 0.1‰, but a few fall in the range −5.2 to −4.3‰. Thus, these grains would have grown from anatectic melts at various pressures. Zircon O isotope differences indicate that anatectic melts were derived from different sources with contrasting O isotopes, but similar Hf isotopes, that is, one from the quartzite itself and the other probably from the country‐rock granitic gneiss. Zircon grains from pure quartzite contain relict magmatic cores and significant metamorphic overgrowths. Domains that contain eclogite facies minerals exhibit flat HREE patterns, no Eu anomalies and concordant U–Pb ages of c. 220 Ma. Similar U–Pb ages are also obtained for domains that contain lower pressure minerals and exhibit steep REE patterns and marked negative Eu anomalies. These observations indicate that zircon records subsolidus overgrowth at eclogite facies conditions but suprasolidus growth at lower pressures. Zircon enclosed by garnet gave consistent U–Pb ages of c. 214 Ma. Such garnet is interpreted as a peritectic product of the anatectic reaction that involves felsic minerals and possibly amphibole and titanite. The REE patterns of epidote and titanite also record multistage growth and metasomatism by anatectic melts. Therefore, the anatexis of UHP metamorphic rocks is evident during continental collision in the Triassic.
Biodegradable metals Zheng, Y.F.; Gu, X.N.; Witte, F.
Materials science & engineering. R, Reports : a review journal,
03/2014, Volume:
77
Journal Article
Peer reviewed
After decades of developing strategies to minimize the corrosion of metallic biomaterials, there is now an increasing interest to use corrodible metals in a number of medical device applications. The ...term “biodegradable metal” (BM) has been used worldwide to describe these new kinds of degradable metallic biomaterials for medical applications and there were many new findings reported over the last decade. In this paper, the definition of BM and its classification are given for the first time, along with the summary of the degradation mechanisms of BMs and its environmental influencing factors, which includes the degeneration of mechanical integrity and the metabolism of the degradation products. The recently-developed representative Mg-based BMs (pure Mg, Mg–Ca alloy, Mg–Zn alloy, etc.), Fe-based BMs (pure Fe, Fe–Mn-based alloys, etc.) and other BMs (pure W, pure Zn and its alloys, Ca-based and Sr-based bulk metallic glasses, etc.) were comprehensively reviewed with emphases on their microstructures, mechanical properties and degradation behaviors, in vitro and in vivo performances, pre-clinical and clinical trials. Moreover, current approaches to control their biodegradation rates to match the healing rates of the host tissues with various surface modification techniques and novel structural designs are summarized. Finally, this paper comprehensively discusses the directions of future development and the challenges of transitioning BMs from raw materials to semi-products to final medical devices. All in all, BM belongs to “bioactive” biomaterials and its future research and development direction should lean towards “third-generation biomedical materials” with “multifunctional capabilities” in a controllable manner to benefit the local tissue reconstruction.
Fluid availability during high‐grade metamorphism is a critical factor in dictating petrological, geochemical and isotopic reequilibration between metamorphic minerals, with fluid‐absent metamorphism ...commonly resulting in neither zircon growth/recrystallization for U‐Pb dating nor Sm‐Nd isotopic resetting for isochron dating. While peak ultra‐high pressure (UHP) metamorphism is characterized by fluid immobility, high‐pressure (HP) eclogite‐facies recrystallization during exhumation is expected to take place in the presence of fluid. A multichronological study of UHP eclogite from the Sulu orogen of China indicates zircon growth at 216 ± 3 Ma as well as mineral Sm‐Nd and Rb‐Sr reequilibration at 216 ± 5 Ma, which are uniformly younger than UHP metamorphic ages of 231 ± 4 to 227 ± 2 Ma as dated by the SHRIMP U‐Pb method for coesite‐bearing domains of zircon. O isotope reequilibration was achieved between the Sm‐Nd and Rb‐Sr isochron minerals, but Hf isotopes were not homogenized between different grains of zircon. The HP eclogite‐facies recrystallization is also evident from petrography. Thus this process occurred during exhumation with fluid availability from decompression dehydration of hydrous minerals and the exsolution of hydroxyl from nominally anhydrous minerals. This provides significant amounts of internally derived fluid for extensive retrogression within the UHP metamorphosed slabs. Based on available experimental diffusion data, the consistent reequilibration of U‐Pb, Sm‐Nd, Rb‐Sr and O isotope systems in the eclogite minerals demonstrates that time‐scale for the HP eclogite‐facies recrystallization is c. 1.9–9.3 Myr or less. This provides a maximum estimate for duration of the fluid‐facilitated process in the HP eclogite‐facies regime during the exhumation of deeply subducted continental crust.
Biodegradable metals have attracted considerable attentions in recent years. Besides the early launched biodegradable Mg and Fe metals, Zn, an essential element with osteogenic potential of human ...body, is regarded and studied as a new kind of potential biodegradable metal quite recently. Unfortunately, pure Zn is soft, brittle and has low mechanical strength in the practice, which needs further improvement in order to meet the clinical requirements. On the other hand, the widely used industrial Zn-based alloys usually contain biotoxic elements (for instance, ZA series contain toxic Al elements up to 40 wt.%), which subsequently bring up biosafety concerns. In the present work, novel Zn-1X binary alloys, with the addition of nutrition elements Mg, Ca and Sr were designed (cast, rolled and extruded Zn-1Mg, Zn-1Ca and Zn-1Sr). Their microstructure and mechanical property, degradation and in vitro and in vivo biocompatibility were studied systematically. The results demonstrated that the Zn-1X (Mg, Ca and Sr) alloys have profoundly modified the mechanical properties and biocompatibility of pure Zn. Zn-1X (Mg, Ca and Sr) alloys showed great potential for use in a new generation of biodegradable implants, opening up a new avenue in the area of biodegradable metals.
Pure iron was determined to be a valid candidate material for biodegradable metallic stents in recent animal tests; however, a much faster degradation rate in physiological environments was desired. ...C, Mn, Si, P, S, B, Cr, Ni, Pb, Mo, Al, Ti, Cu, Co, V and W are common alloying elements in industrial steels, with Cr, Ni, Mo, Cu, Ti, V and Si being acknowledged as beneficial in enhancing the corrosion resistance of iron. The purpose of the present work (using Fe–X binary alloy models) is to explore the effect of the remaining alloying elements (Mn, Co, Al, W, B, C and S) and one detrimental impurity element Sn on the biodegradability and biocompatibility of pure iron by scanning electron microscopy, X-ray diffraction, metallographic observation, tensile testing, microhardness testing, electrochemical testing, static (for 6months) and dynamic (for 1month with various dissolved oxygen concentrations) immersion testing, cytotoxicity testing, hemolysis and platelet adhesion testing. The results showed that the addition of all alloying elements except for Sn improved the mechanical properties of iron after rolling. Localized corrosion of Fe–X binary alloys was observed in both static and dynamic immersion tests. Except for the Fe–Mn alloy, which showed a significant decrease in corrosion rate, the other Fe–X binary alloy corrosion rates were close to that of pure iron. It was found that compared with pure iron all Fe–X binary alloys decreased the viability of the L929 cell line, none of experimental alloying elements significantly reduced the viability of vascular smooth muscle cells and all the elements except for Mn increased the viability of the ECV304 cell line. The hemolysis percentage of all Fe-X binary alloy models were less than 5%, and no sign of thrombogenicity was observed. In vitro corrosion and the biological behavior of these Fe–X binary alloys are discussed and a corresponding mechanism of corrosion of Fe–X binary alloys in Hank’s solution proposed. As a concluding remark, Co, W, C and S are recommended as alloying elements for biodegradable iron-based biomaterials.
Abstract The dose-limiting side effect of the anti-neoplastic agent, paclitaxel, is a chronic distal symmetrical peripheral neuropathy that produces sensory dysfunction (hypoesthesia and neuropathic ...pain) but little or no distal motor dysfunction. Similar peripheral neuropathies are seen with chemotherapeutics in the vinca alkaloid, platinum-complex, and proteasome inhibitor classes. Studies in rats suggest that the cause is a mitotoxic effect on axonal mitochondria. If so, then the absence of motor dysfunction may be due to mitotoxicity that affects sensory axons but spares motor axons. To investigate this, paclitaxel exposure levels in the dorsal root, ventral root, dorsal root ganglion, peripheral nerve, and spinal cord were measured, and the ultrastructure and the respiratory function of mitochondria in dorsal roots and ventral roots were compared. Sensory and motor axons in the roots and nerve had comparably low exposure to paclitaxel and exposure in the spinal cord was negligible. However, sensory neurons in the dorsal root ganglion had a very high and remarkably persistent (up to 10 days or more after the last injection) exposure to paclitaxel. Paclitaxel evoked a significant increase in the incidence of swollen and vacuolated mitochondria in the myelinated and unmyelinated sensory axons of the dorsal root (as seen previously in the peripheral nerve) but not in the motor axons of the ventral root. Stimulated mitochondrial respiration in the dorsal root was significantly depressed in paclitaxel-treated animals examined 2–4 weeks after the last injection, whereas respiration in the ventral root was normal. We conclude that the absence of motor dysfunction in paclitaxel-evoked peripheral neuropathy may be due to the absence of a mitotoxic effect in motor neuron axons, whereas the sensory dysfunction may be due to a mitotoxic effect resulting from the primary afferent neuron's cell body being exposed to high and persistent levels of paclitaxel.
PDF
