Too much of a good thing Sutton, Mark A; Oenema, Oene; Erisman, Jan Willem ...
Nature,
04/2011, Volume:
472, Issue:
7342
Journal Article
Peer reviewed
Open access
All biological systems need reactive nitrogen, but historically it has been in short supply. ... the end of the nineteenth century, the main agricultural source was fixation of N2 by symbiotic ...bacteria in legumes planted for that purpose, combined with careful recycling of the limited amount of nitrogen in manure.
In late 2019, a novel infectious disease with human to human transmission (COVID-19) was identified in Wuhan China, which now has turned into a global pandemic. Countries all over the world have ...implemented some sort of lockdown to slow down its infection and mitigate it. Lockdown due to COVID-19 has drastic effects on social and economic fronts. However, this lockdown also has some positive effect on natural environment. Recent data released by NASA (National Aeronautics and Space Administration) and ESA (European Space Agency) indicates that pollution in some of the epicenters of COVID-19 such as Wuhan, Italy, Spain and USA etc. has reduced up to 30%. This study compiled the environmental data released by NASA and ESA before and after the coronavirus pandemic and discusses its impact on environmental quality.
Display omitted
•Half of the world population is under some form of lockdown due to COVID-19.•Environmental pollution is reduced up to 30%.•Mobility is reduced up to 90%.
Smelting is an industrial process involving the extraction of metal from ore. During this process, impurities in ore-including arsenic, lead, and cadmium-may be released from smoke stacks, ...contaminating air, water, and soil with toxic-heavy metals.
The problem of public health harm from smelter emissions received little official attention for much for the twentieth century. Though people living near smelters periodically complained that their health was impaired by both sulfur dioxide and heavy metals, for much of the century there was strong deference to industry claims that smelter operations were a nuisance and not a serious threat to health. It was only when the majority of children living near the El Paso, Texas, smelter were discovered to be lead-exposed in the early 1970s that systematic, independent investigation of exposure to heavy metals in smelting communities began. Following El Paso, an even more serious led poisoning epidemic was discovered around the Bunker Hill smelter in northern Idaho. In Tacoma, Washington, a copper smelter exposed children to arsenic-a carcinogenic threat.
Thoroughly grounded in extensive archival research,Tainted Earthtraces the rise of public health concerns about nonferrous smelting in the western United States, focusing on three major facilities: Tacoma, Washington; El Paso, Texas; and Bunker Hill, Idaho. Marianne Sullivan documents the response from community residents, public health scientists, the industry, and the government to pollution from smelters as well as the long road to protecting public health and the environment. Placing the environmental and public health aspects of smelting in historical context, the book connects local incidents to national stories on the regulation of airborne toxic metals.
The nonferrous smelting industry has left a toxic legacy in the United States and around the world. Unless these toxic metals are cleaned up, they will persist in the environment and may sicken people-children in particular-for generations to come. The twentieth-century struggle to control smelter pollution shares many similarities with public health battles with such industries as tobacco and asbestos where industry supported science created doubt about harm, and reluctant government regulators did not take decisive action to protect the public's health.
Display omitted
•Chemical, physical, biological and magnetic harvesting methods are summarized.•Charge neutralisation, patching, bridging and swapping mechanisms are analyzed.•Application of magnetic ...nanomaterials can realize the microalgae harvesting.•The microalgae production can be combined with environmental pollution control.
Biodiesel is one of the best promising candidates in response to the energy crisis, since it has the capability to minimize most of the environmental problems. Microalgae, as the feedstock of third-generation biodiesel, are considered as one of the most sustainable resources. However, microalgae production for biodiesel feedstock on a large scale is still limited, because of the influences of lipid contents, biomass productivities, lipid extraction technologies, the water used in microalgae cultivation and processes of biomass harvesting. This paper firstly reviews the recent advances in microalgae cultivation and growth processes. Subsequently, current microalgae harvesting technologies are summarized and flocculation mechanisms are analyzed, while the characteristics that the ideal harvesting methods should have are summarized. This review also summarizes the environmental pollution control performances and the key challenges in future. The key suggestions and conclusions in the paper can offer a promising roadmap for the cost-effective biodiesel production.
In the methodological context of the interpretation of environmental life cycle assessment (LCA) results, a normalisation study was performed. 15 impact categories were accounted for, including ...climate change, acidification, eutrophication, human toxicity, ecotoxicity, depletion of fossil energy resources, and land use. The year 2000 was chosen as a reference year, and information was gathered on two spatial levels: the global and the European level. From the 860 environmental interventions collected, 48 interventions turned out to account for at least 75% of the impact scores of all impact categories. All non-toxicity related, emission dependent impacts are fully dominated by the bulk emissions of only 10 substances or substance groups: CO2, CH4, SO2, NOx, NH3, PM10, NMVOC, and (H)CFCs emissions to air and emissions of N- and P-compounds to fresh water. For the toxicity-related emissions (pesticides, organics, metal compounds and some specific inorganics), the availability of information was still very limited, leading to large uncertainty in the corresponding normalisation factors. Apart from their usefulness as a reference for LCA studies, the results of this study stress the importance of efficient measures to combat bulk emissions and to promote the registration of potentially toxic emissions on a more comprehensive scale.
The linear production and consumption of plastics today is unsustainable. It creates large amounts of unnecessary and mismanaged waste, pollution and carbon dioxide emissions, undermining global ...climate targets and the Sustainable Development Goals. This Perspective provides an integrated technological, economic and legal view on how to deliver a circular carbon and plastics economy that minimizes carbon dioxide emissions. Different pathways that maximize recirculation of carbon (dioxide) between plastics waste and feedstocks are outlined, including mechanical, chemical and biological recycling, and those involving the use of biomass and carbon dioxide. Four future scenarios are described, only one of which achieves sufficient greenhouse gas savings in line with global climate targets. Such a bold system change requires 50% reduction in future plastic demand, complete phase-out of fossil-derived plastics, 95% recycling rates of retrievable plastics and use of renewable energy. It is hard to overstate the challenge of achieving this goal. We therefore present a roadmap outlining the scale and timing of the economic and legal interventions that could possibly support this. Assessing the service lifespan and recoverability of plastic products, along with considerations of sufficiency and smart design, can moreover provide design principles to guide future manufacturing, use and disposal of plastics.
Plastics have transformed everyday life; usage is increasing and annual production is likely to exceed 300 million tonnes by 2010. In this concluding paper to the Theme Issue on Plastics, the ...Environment and Human Health, we synthesize current understanding of the benefits and concerns surrounding the use of plastics and look to future priorities, challenges and opportunities. It is evident that plastics bring many societal benefits and offer future technological and medical advances. However, concerns about usage and disposal are diverse and include accumulation of waste in landfills and in natural habitats, physical problems for wildlife resulting from ingestion or entanglement in plastic, the leaching of chemicals from plastic products and the potential for plastics to transfer chemicals to wildlife and humans. However, perhaps the most important overriding concern, which is implicit throughout this volume, is that our current usage is not sustainable. Around 4 per cent of world oil production is used as a feedstock to make plastics and a similar amount is used as energy in the process. Yet over a third of current production is used to make items of packaging, which are then rapidly discarded. Given our declining reserves of fossil fuels, and finite capacity for disposal of waste to landfill, this linear use of hydrocarbons, via packaging and other short-lived applications of plastic, is simply not sustainable. There are solutions, including material reduction, design for end-of-life recyclability, increased recycling capacity, development of bio-based feedstocks, strategies to reduce littering, the application of green chemistry life-cycle analyses and revised risk assessment approaches. Such measures will be most effective through the combined actions of the public, industry, scientists and policymakers. There is some urgency, as the quantity of plastics produced in the first 10 years of the current century is likely to approach the quantity produced in the entire century that preceded.