DIKUL - logo
(UL)
  • Cost-efficient oceanographic instrument with microfabricated sensors for measuring conductivity, temperature and depth of seawater [Elektronski vir]
    Možek, Matej ; Pečar, Borut, 1982- ; Vrtačnik, Danilo
    The design, fabrication and characterization of a cost-efficient oceanographic instrument with microfabricated sensors for measuring conductivity, temperature and depth of seawater are presented. ... Conductivity and temperature sensors were fabricated using MEMS technology, which allows for customized small footprints and low production costs. Dedicated electronics for reading, processing and storing acquired sensor data are described. The developed instrument enables the measurement of seawater conductivity in a range from 4 mS/cm to 70 mS/cm. The conductivity measurement is temperature-compensated in the range from 2 °C to 40 °C, with an accuracy of ±0.1 mS/cm. The temperature sensor’s stability is 0.025 °C. The depth/pressure measurement range is up to 2000 m/200 bar, with a resolution of 0.1 bar. Temperature and conductivity sensor performance was assessed using laboratory equipment and designed electronics. The conductivity sensor was temperature-compensated to 0.01 mS/cm. The conductivity sensor electrode corrosion effect is presented below and was eliminated through adaptation of a signal acquisition circuit. Custom software was developed for monitoring critical conductivity sensor parameters (currents, voltages). A variation of 0.4% between cell conductance currents and voltages was established as a criterion for stable conductivity sensor operation.
    Source: Sensors [Elektronski vir]. - ISSN 1424-8220 (Vol. 24, iss. 12, [article no.] 3940, Jun.-2 2024, 28 str.)
    Type of material - e-article
    Publish date - 2024
    Language - english
    COBISS.SI-ID - 199466755

    Link(s):

    https://www.mdpi.com/1424-8220/24/12/3940
    Repository of the University of Ljubljana – RUL
    DOI

Shelf entry