This paper presents a 64-element 28-GHz phased-array transceiver for 5G communications based on <inline-formula> <tex-math notation="LaTeX">2\times 2 </tex-math></inline-formula> transmit/ receive (TRX) beamformer chips. Sixteen of the <inline-formula> <tex-math notation="LaTeX">2\times 2 </tex-math></inline-formula> TRX chips are assembled on a 12-layer printed circuit board (PCB) together with a Wilkinson combiner/divider network and 28-32-GHz stacked-patch antennas. The 64-element array results in 1.1 dB and 8.9° rms amplitude and phase error, respectively, with no calibration due to the symmetric design of the <inline-formula> <tex-math notation="LaTeX">2\times 2 </tex-math></inline-formula> beamformer chips and the PCB Wilkinson network. The effect of phase and amplitude mismatch between the 64 elements is analyzed and shown to have little impact on the 64-element array performance due to the averaging effects of phased arrays. Detailed pattern, effective isotropic radiated power (EIRP), and link measurements performed without any array calibration are presented and show the robustness of the symmetrical design technique. The phased array can scan to ±50° in azimuth (<inline-formula> <tex-math notation="LaTeX">H </tex-math></inline-formula>-plane) and ±25° in elevation (<inline-formula> <tex-math notation="LaTeX">E </tex-math></inline-formula>-plane) with low sidelobes and achieves a saturated EIRP of 52 dBm with 4-GHz 3-dB bandwidth. A 300-m wireless link is demonstrated with a record-setting data rate of 8-12 Gb/s over all scan angles using two 64-element TRX arrays and 16-/64-QAM waveforms.