E-resources
Peer reviewed
-
Influence of annealing temperature on the strain-hardening behavior of a lean duplex stainless steelGuo, Baofeng; Zhang, Qifei; Chen, Lei; Guo, Xiaomin; Li, Na; Liu, Xingang; Jin, Miao
Materials science & engineering. A, Structural materials : properties, microstructure and processing, 04/2018, Volume: 722Journal Article
The influence of varying the annealing temperature from 1000 °C to 1200 °C on the strain-hardening behavior of a lean duplex stainless steel with a metastable austenite phase was investigated by tensile deformation. The results indicated that the tensile properties of the test steel were sensitive to the annealing temperature. The test steel showed enhanced ultimate tensile strength (UTS) and elongation due to the transformation-induced plasticity (TRIP) or/and the twinning-induced plasticity (TWIP) effects. The optimum combination of UTS and ductility with approximately 60 GPa% was obtained at an annealing temperature of 1050 °C. The shape of the strain-hardening curve for the selected annealing temperature range could be divided into two cases: (i) a typical three-stage strain-hardening from 1000 to 1050 °C and (ii) a multiple-stage strain-hardening from 1100 to 1200 °C. Microstructural observations revealed that the typical three-stage hardening was mainly related to a strain-induced martensitic transformation with a sequence of γ→ε→α’, i.e., the TRIP effect. In addition to the strain-induced martensites, mechanical twins were observed in the deformed austenite of the specimens annealed at temperatures above 1100 °C. This result indicated that TRIP and TWIP occurred concurrently in the austenite at higher annealing temperatures. The synergy and mutual competition from the coexistence of TRIP and TWIP caused the multiple-stage strain-hardening.
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|
Source: Personal bibliographies
and: SICRIS
The material is available in full text. If you wish to order the material anyway, click the Continue button.