DIKUL - logo
E-resources
Full text
Peer reviewed
  • Combined compression-bendin...
    Li, Gen; Hou, Chao; Shen, Luming

    Journal of constructional steel research, 20/May , Volume: 192
    Journal Article

    This paper presents a comprehensive numerical study on the combined compression-bending performance of concrete-filled steel tubes (CFSTs) considering the commonly seen localised pitting corrosion damage in the marine environment. An advanced finite element modelling technique is utilised to simulate the localised corrosion pits on the outer surface of the steel tube considering its random nature. The differences between the load-moment interaction of CFSTs with uncorroded conditions, uniform corrosion simplification and pitting corrosion are discussed. The analytical results reveal the impact of localised pitting corrosion damage on the combined compression-bending performance of CFSTs can be grouped as the stress concentration around corrosion pits, premature local buckling of steel tubes and the reduction in effective confinement. An extended parametric study illustrates that the confinement factor and the mean pit depth have a considerable impact on the combined compression-bending behaviour of CFSTs with localised pitting corrosion. The feasibility of utilising existing design approaches calculates the load-moment interaction diagrams of locally pitted CFSTs following the DoV-based uniform corrosion simplification is evaluated. On this basis, simplified design methods accounting for the characteristic of pitting corrosion are proposed for estimating the post-corrosion load-bearing capacity of CFSTs under combined compression and bending, and reasonable accuracy is achieved. •An advanced approach is presented for random localised pitting corrosion modelling of steel tubes.•The prediction of stress concentration and nonlinear variation of material confinement is enabled in the modelling.•The effects of localised pitting corrosion on the combined compression-bending performance are comprehensively studied.•Simplified design methods are proposed for predicting the post-corrosion load-bearing capacity.