Free-space optical (FSO) links offer gigabit per second data rates and low system complexity, but suffer from atmospheric loss due to fog and scintillation. Radio-frequency (RF) links have lower data rates, but are relatively insensitive to weather. Hybrid FSO/RF links combine the advantages of both links. Currently, selection or "hard-switching" is performed between FSO or RF links depending on feedback from the receiver. This technique is inefficient since only one medium is used at a time. In this paper, we develop a "soft-switching" scheme for hybrid FSO/RF links using short-length Raptor codes. Raptor encoded packets are sent simultaneously on both links and the code adapts to the conditions on either link with very limited feedback. A set of short-length Raptor codes (κ = 16 to 1024) are presented which are amenable to highspeed implementation. A practical Raptor encoder and decoder are implemented in an FPGA and shown to support a 714 Mbps data rate with a 97 mW power consumption and 26360 gate circuit scale. The performance of the switching algorithms is simulated in a realistic channel model based on climate data. For a 1 Gbps FSO link combined with a 96 Mbps WiMAX RF link, an average rate of over 472 Mbps is achieved using the implemented Raptor code while hard-switching techniques achieved 112 Mbps on average.