Currently, in order to decrease the negative effects caused by the presence of a discrete phase in the flow path of steam turbines stages operating in wet-steam area, different technical solutions are apply. These methods reduce the number of coarse droplets and wetness of working medium. The implementation of erosion reduction methods requires modifying surfaces of flow path, which can significantly affect the efficiency of the steam turbine. For example application of intrachanel moisture removing and steam injection needs changes of the stator blades surfaces. This article is a part of researches cycle about the efficiency of steam injection on the stator blade surface as the main method of coarse liquid particles diameters reduction in the last stages of high-power steam turbines. The paper presents the results of the analysis and comparison of experimental research unmodified profile to the profile of the stator blade changed by injection slot. The comparison of the profile losses considered blades is present. The analysis of the experimental results showed the feasibility and efficiency of this method of coarse liquid particles diameters reduction in the last stages of high-power steam turbines.