Display omitted •The best conditions for the toxic elements removal from CCA-treated wood were studied.•Acid extraction was effective in the removal of Cu, Cr and As from eucalyptus wood.•The waste was no longer hazardous and can be recycled.•The methodology presents significant potential for use in managing this waste type. Preservatives such as chromated copper arsenate (CCA) are used to increase the resistance of wood to deterioration. The components of CCA are highly toxic, resulting in growing concern over the disposal of the waste generated. The aim of this study was to investigate the removal of Cu, Cr and As present in CCA-treated eucalyptus wood from utility poles removed from service in southern Brazil, in order to render them non-hazardous waste. The removal was carried out by acid leaching in bench-scale and applying optimal extractor concentration, total solid content, reactor volume, temperature and reaction time obtained by factorial experiments. The best working conditions were achieved using three extraction steps with 0.1molL−1H2SO4 at 75°C for 2h each (total solid content of 15%), and 3 additional 1h-long washing steps using water at ambient temperature. Under these conditions, removal of 97%, 85% and 98% were obtained for Cu, Cr and As, respectively, rendering the decontaminated wood non-hazardous waste. The wastewater produced by extraction showed acid pH, high organic loading as well as high concentrations of the elements, needing prior treatment to be discarded. However, rinsing water can be recycled in the extraction process without compromising its efficiency. The acid extraction is a promising alternative for CCA removal from eucalyptus wood waste in industrial scale.