VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Durability of epoxy and polyurethane bonded timber-hybrid FRP joints under hygrothermal and weathering conditions [Elektronski vir]Huang, Silu ...This paper investigates the bond between laminated veneer lumber (LVL) and flax-glass hybrid fibre reinforced polymer (HFRP) with different fabric stacking sequences in the LVL-HFRP joints exposed to ... (1) room condition at the temperature of 20 °C and relative humidity (RH) of 57% (as reference condition), (2) hygrothermal condition (50 °C and 95% RH), and (3) weathering environment (a dry-wet-ultraviolet radiation cyclic condition). Epoxy (EP) and polyurethane (PUR) adhesives were used to manufacture the HFRP composites and bond them to the LVL as LVL-HFRP joints. The joints were tested under block shear tests to evaluate the bond behaviour. The LVL block shear specimens were also tested as the reference for the shear strength change of the LVL in the joints. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) tests were conducted to study the influence of the hygrothermal and weathering conditions on the functional groups and the glass transition temperature (Tg) of the LVL-HFRP joints. After the hygrothermal and weathering exposures, the results showed that the Tg of the EP-based and PUR-based HFRP in the LVL-HFRP joints increased due to the post-curing and the arrangement of the disordered urea groups. The average shear strength values of the LVL-HFRP joints bonded with the EP adhesive decreased by 4.6–35.2% and the reduction of the shear strength of the LVL part in the joints accounted for the decreased shear strength at the joint level. The average shear strength values of the LVL-HFRP joints bonded with the PUR adhesive decreased by 27.9–57.0% and the reduction of the shear strength at the joint level was controlled by the glass fibre layer of the PUR-based HFRP, regardless of the fabric stacking sequence in the PUR-based HFRP.Vir: Journal of building engineering [Elektronski vir]. - ISSN 2352-7102 (Vol. 58, art. 104989, 2022, str. 1-21)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2022Jezik - angleškiCOBISS.SI-ID - 150357507
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Huang, Silu | ![]() |
Yan, Libo | ![]() |
Bachtiar, Erik Valentine | ![]() |
Kasal, Bohumil | 50807 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: