VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
Analytical modeling and numerical simulation of heat transfer in a skin evaporatorLorbek, Luka, strojnik ...This paper presents a one-dimensional, steady-state, analytical and a two-dimensional, steady-state, numerical approach to describing heat transfer in the complex solid structure of a skin evaporator ... used in household refrigerators. Both models are based on a specific form of the energy equation (the heat diffusion equation), which is solved to obtain the temperature distributions and heat flows within the different parts of the structure. Heat transfer is limited by a number of thermal resistances, such as the inner plastic wall of the refrigerator, the aluminum plate, the foil, the tube of the evaporator, and the air gaps. The insulation that prevents heat flowing into the evaporator from the surroundings is also taken into consideration. A comparison of the models showed that the root-mean-square deviation of the calculated temperatures ranged from 0.34 K to 0.60 K and that the area-weighted discrepancy of the calculated heat flows was 4.6%. Experimental validation of the model showed that the calculated and measured evaporator capacities were within +/- 12%. This demonstrates that several simplifications to the analytical model can be made, so drastically reducing the complexity of modeling a skin evaporator's structure, while retaining sufficient accuracy. These simplifications include reducing the heat transfer to one-dimensional heat conduction in the individual parts of the structure, neglecting the heat flux through the aluminum-air-gap contact, and linearizing the aluminium foil.Vir: International journal of refrigeration = Revue internationale du froid. - ISSN 0140-7007 (Vol. 88, 2018, str. 195-203)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2018Jezik - angleškiCOBISS.SI-ID - 15891227
Avtor
Lorbek, Luka, strojnik |
Poredoš, Primož, strojnik, 1986- |
Kitanovski, Andrej |
Poredoš, Alojz
Teme
cevno-ploščni uparjalnik |
prenos toplote |
gospodinjski hladilnik |
analitično modeliranje |
numerična simulacija |
skin evaporator |
heat transfer |
household refrigerator |
analytical modelling |
numerical simulation
vir: International journal of refrigeration = Revue internationale du froid. - ISSN 0140-7007 (Vol. 88, 2018, str. 195-203)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Lorbek, Luka, strojnik | 50586 |
Poredoš, Primož, strojnik, 1986- | 33242 |
Kitanovski, Andrej | 18580 |
Poredoš, Alojz | 06415 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: