VSE knjižnice (vzajemna bibliografsko-kataložna baza podatkov COBIB.SI)
-
The use of modern 3D technologies for the development of a prototype mountain bike brake lever within the concept of personalized production [Elektronski vir]Žibert, Sebastijan ; Mamić, Maša ; Hozdić, ElvisMountain biking (MTB) is a popular sport for more and more people. Control over the bike is very important for a successful ride, especially when the rider gets off the mountain bike in rough ... terrain. Control over the bike is ensured by appropriate braking systems, which differ depending on the type of mountain biking. During a challenging descent, the cyclist consumes energy to overcome obstacles on the trail, so using the right brakes is crucial. The rider performs the braking process with the brake lever of the bicycle. On difficult descents, for example in bad weather (rain), it is important that the finger does not "slip" on the brake lever. Also important is the feeling of contact with the brake lever that the rider has when braking. For this reason, from an ergonomic point of view, the shape of the brake lever is crucial for a safe and controlled mountain bike ride. This paper presents the results of the use of advanced 3D technologies for the development of a prototype mountain bike brake lever within the concept of personalised production. The common thread of the presented research is the process of developing a prototype mountain bike brake lever from an ergonomic point of view, supported by modern 3D technologies such as 3D scanning, 3D modelling and 3D printing.Vir: IOP conference series [Elektronski vir]. Materials science and engineering. - ISSN 1757-899X (Vol. 1298, [št. članka] 012006, 2023, str. 1-18)Vrsta gradiva - e-članek ; neleposlovje za odrasleLeto - 2023Jezik - angleškiCOBISS.SI-ID - 179337219
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Žibert, Sebastijan | |
Mamić, Maša | 55039 |
Hozdić, Elvis | 56925 |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema: