Enhanced polymer gear inspection based on 3D optical metrologyUrbas, Uroš, strojnik ...Accurately manufactured gears require a reliable, holistic, and fast inspection method. Standardised geometrical parameters enable a consistent and regulated inspection of gears; however, current ... inspection methods include only a limited set of measurements for gears at specific locations. Therefore, a method to obtain holistic threedimensional (3D) measurements with an optical inspection was thoroughly investigated. The measurement data were acquired via 3D optical scanning. The data were then processed and evaluated using the developed software. This was first tested on a simulated scan of an ideal shape with different mesh resolutions and subsequently on a simulated scan with synthetic deviations. The method was finally validated by measuring the gears using a coordinate-measuring machine; the results obtained were compared with those obtained using the developed optical method. A good agreement between the methods was observed. The optical method offers a more holistic measurement approach with many important advantages being identified compared with the tactile method.Vir: Engineering - a world of new opportunities : proceedings of the 9th AMES International Conference, Ljubljana, Slovenia, December 15th, 2020 = Inženirstvo - svet novih priložnosti : zbornik 9. Mednarodne konference strojnih inženirjev Slovenije, Ljubljana, 15. december 2020 (Str. 16-17)Vrsta gradiva - prispevek na konferenciLeto - 2021Jezik - angleškiCOBISS.SI-ID - 49145347
Vnos na polico
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Baze podatkov, v katerih je revija indeksirana
|Ime baze podatkov||Področje||Leto|
Izberite prevzemno mesto:
Gesla v Splošnem geslovniku COBISS
Prosimo, počakajte trenutek.