-
A hybrid radial basis function-finite difference method for modelling two-dimensional thermo-elasto-plasticity. Part 2, Application to cooling of hot-rolled steel bars on a cooling bedVuga, Gašper ...This paper represents Part 2 of the parallel paper Part 1, where the strong form hybrid RBF-FD method was developed for solving thermo-elasto-plastic problems. It addresses the industrial application ... of this novel meshless method to steel bars cooling on a cooling bed (CB) where the formation of residual stress is of primary interest. The study investigates the impact of the distance between the bars and the distance to the heat shield above the CB on radiative heat fluxes and, consequently, on thermo-mechanical response. The thermal model is solved on bars cross-section with a RBF-FD method where augmented polyharmonic splines are used for the local approximation. View factors, computed with a Monte-Carlo method, are included in radiative heat fluxes. The thermal solution is incrementally applied on a mechanical model that assumes a generalised plane strain state and captures bars bending. The study employs a hybrid RBF-FD method to resolve a nonlinear discontinuous mechanical problem successfully. The simulation of the process shows how different process parameters influence the thermo-mechanical response of the bars.Vir: Engineering analysis with boundary elements. - ISSN 0955-7997 (Vol. 159, Feb. 2024, str. 331-341)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2024Jezik - angleškiCOBISS.SI-ID - 179241219
Avtor
Vuga, Gašper |
Mavrič, Boštjan, 1989- |
Hanoglu, Umut |
Šarler, Božidar
Teme
steel bars |
cooling bed |
thermo-mechanical modelling |
hybrid radial basis function |
generated finite differences |
residual stresses |
jeklene palice |
hladilne klopi |
termo-mehansko modeliranje |
hibridne končne diference |
radialne bazne funkcije |
zaostale napetosti
Avtor | Vuga, Gašper ... |
Naslov | A hybrid radial basis function-finite difference method for modelling two-dimensional thermo-elasto-plasticity. Part 2, Application to cooling of hot-rolled steel bars on a cooling bed |
Datum objave | 2024-02-01 |
COBISS.SI-ID | 179241219 |
Verzija objave v repozitoriju | Založnikova različica |
Licenca objave v repozitoriju | Creative Commons Priznanje avtorstva 4.0 Mednarodna |
Embargo | Takojšnja javna objava |
Projekti, iz katerih je bila financirana objava
Naziv | Akronim | Številka projekta | Financer |
---|---|---|---|
Večfazni sistemi | P2-0162-2022 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
NAPREDNA SIMULACIJA IN OPTIMIZACIJA CELOTNE PROCESNE POTI ZA IZDELAVO VRHUNSKIH JEKEL | L2-3173-2021 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
Razvoj naprednih brezmrežnih metod za modeliranje predelave kovin na visokozmogljivih računalnikih | Z2-2640-2020 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
|
Simulacije vročega valjanja za proizvodnjo jekel vrhunskih kvalitet | L2-2609-2020 |
Javna agencija za znanstvenoraziskovalno in inovacijsko dejavnost Republike Slovenije |
Datoteke, ki spadajo k objavi
Povezava |
---|
https://www.sciencedirect.com/science/article/pii/S0955799723005714 |
https://repozitorij.uni-lj.si/IzpisGradiva.php?id=153392 |
https://dirros.openscience.si/IzpisGradiva.php?id=18278 |
vir: Engineering analysis with boundary elements. - ISSN 0955-7997 (Vol. 159, Feb. 2024, str. 331-341)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Vuga, Gašper | 53510 |
Mavrič, Boštjan, 1989- | 36364 |
Hanoglu, Umut | 30833 |
Šarler, Božidar | 04101 |
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Obvestilo
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Mesto prevzema | Status gradiva | Rezervacija |
---|
Prosimo, počakajte trenutek.