DIKUL - logo
Fakulteta za strojništvo, Ljubljana (FSLJ)
  • Analysis of calcination parameters and the temperature profile in an annular shaft kiln. Part 2: Results of tests
    Senegačnik, Andrej ; Oman, Janez, 1947- ; Širok, Brane
    The article discusses experimental measurements of the vertical temperature profile and kiln gas composition in an annular shaft kiln for lime burning. The results obtained confirm that calcination ... of the limestone in the kiln begins at temperatures between 820 °C and 830 °C. The average heat transfer coefficient from kiln gases to the stones is determined, as well as the calcination distribution within the kiln. Modeling the calcination process in an annular shaft kiln was performed on the basis of the measured temperature profile. The results of this model are in good agreement with those for samples of partially calcinated stones taken from the area of the lower and upper burners.
    Vir: Applied thermal engineering. - ISSN 1359-4311 (Letn. 27, št. 8/9, 2007, str. 1473-1482)
    Vrsta gradiva - članek, sestavni del
    Leto - 2007
    Jezik - angleški
    COBISS.SI-ID - 9748251

    Povezava(-e):

    http://dx.doi.org/10.1016/applthermaleng.2006.09.026

    Dostop do polnega teksta samo za člane



vir: Applied thermal engineering. - ISSN 1359-4311 (Letn. 27, št. 8/9, 2007, str. 1473-1482)

loading ...
loading ...
loading ...

Vnos na polico