Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Effect of tunneling defects on the joint strength efficiency obtained with FSW = Vpliv tunelskih napak na učinkovitost trdnosti spoja, izdelanega z drsno mešalnim varjenjemBaloš, Sebastian ; Šiđanin, Leposava P.In this paper, an attempt was made to study the effects of various types of tunneling defects in friction stir welding (FSW). Two types of welding tool were used, one with a threaded and the other ... with a polygonal pin. To enable the formation of tunneling defects, the shoulder-to-pin-volume ratio was larger than 1 for both tools, while the ratio of rotation speed to welding speed was optimized as well. Tunneling defects were tested on EN-AW 5052 H32 and H38 alloys, having the thicknesses of 3 mm and 8 mm. It was found that the threaded tool produced a single or double triangular, as well as crack-shaped tunnel. The polygonal tool produced a multiple triangular tunnel (the material flows toward the weld face) with a complex shape or a crack-type tunnel with a complex shape. The most unfavorable tunnel obtained with the polygonal tool was the crack-shaped one, resulting in the 62 % and 46 % joint yield and ultimate tensile-strength efficiency. The corresponding values for the threaded tool were 40 % and 36 %. The hardness efficiencies did not follow the trends of the proof and ultimate tensile strengths due to the prevention of the tunneling during indentation. Another effect on the hardness is the presence of microcracks that may influence the apparent decrease in the hardness in spite of the detected grain-refinement effect in the nugget. These effects influence the hardness distribution in the weld, shifting the maximum hardness value into the thermo-mechanical zone.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 4, jul.-avg. 2014, str. 491-496)Vrsta gradiva - članek, sestavni del ; neleposlovje za odrasleLeto - 2014Jezik - angleškiCOBISS.SI-ID - 1071530
![loading ... loading ...](themes/default/img/ajax-loading.gif)
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 4, jul.-avg. 2014, str. 491-496)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Baloš, Sebastian | ![]() |
Šiđanin, Leposava P. | ![]() |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi