DIKUL - logo
Narodna in univerzitetna knjižnica, Ljubljana (NUK)
Naročanje gradiva za izposojo na dom
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi
  • Computer modelling of the residual limb for the development of prosthetic sockets and liners with the cellular structure = Računalniško modeliranje krna za razvoj ležišč in vložkov protez iz celičnih struktur : doctoral disertation = doktorska disertacija
    Plesec, Vasja
    The production of lower limb prostheses continues to rely primarily on manual methods, which are outdated and characterized by labour-intensive processes, lengthy time requirements, high costs, and a ... heavy reliance on the expertise of prosthetists. Achieving a satisfactory fit between the residual limb and socket remains a challenge, often leading to discomfort, pain, and potential wearer tissue damage. However, advancements in computer technology and numerical simulation offer an opportunity to predict stresses and strains experienced by the residual limb during prosthesis usage. This, in turn, aids in the development process by enhancing the design of the prosthetic socket and liner through virtual environments. In this dissertation we developed a generic numerical transtibial model to bridge the gap between clinical practice and numerical simulations. Biomechanically validated, this model generates outcomes applicable to a broader amputee population, facilitating comparative analysis of socket and liner designs and materials under different loading conditions. Furthermore, the dissertation explores the utilization of a 3D-printed socket manufactured through the cost-effective fused filament fabrication process, using polylactic acid filament, aiming to reduce the costs and establish a streamlined production process. The 3D-printed socket was evaluated within the virtual environment using the developed transtibial model. The numerical findings indicate that the 3D-printed socket can effectively withstand the loads encountered during the stages of prosthesis donning, single-leg stance, heel strike, and push-off, thereby presenting a viable alternative to the prevalent composite socket. Additionally, a cellular structure composed of a flexible thermoplastic elastomeric material is proposed as a prosthetic liner to enhance comfort by reducing contact pressure while maintaining the required stability. Numerical results indicate that by manipulating cellular parameters such as unit cell type and relative density of the structure, a customized response can be achieved. This customized response effectively reduces contact pressure for a given scenario without increasing displacement, thereby improving comfort while maintaining stability.
    Vrsta gradiva - disertacija ; neleposlovje za odrasle
    Založništvo in izdelava - Maribor : [V. Plesec], 2023
    Jezik - angleški, slovenski
    COBISS.SI-ID - 172145667

    Povezava(-e):

    Digitalna knjižnica Univerze v Mariboru – DKUM

Rezervirajte gradivo na želenem mestu prevzema.

Mesto prevzema Status gradiva Rezervacija
Časopisna čitalnica
prosto - za čitalnico
Velika čitalnica
prosto - za čitalnico
Signatura – lokacija, inventarna št. ... Status izvoda
GS II 0000750588 glavno skladišče GS II 750588 glavno skladišče prosto - za čitalnico
loading ...
loading ...
loading ...

Vnos na polico