Narodna in univerzitetna knjižnica, Ljubljana (NUK)
-
Minimization of surface defects by increasing the surface temperature during the straightening of a continuously cast slab = Zmanjševanje površinskih napak z zvišanjem temperature površine kontinuirno ulitega slaba med ravnanjemStetina, Jozef ...Surface temperatures of cast slabs on small-radius segments as well as on the unbent areas belong to the parameters that affect the surface quality of continuously cast slabs. Older machines for ... continuous casting were designed with regard to the quantity (the amount of cast slabs) rather than the quality of the production. Therefore, an adaptation of the secondary cooling is required in order to obtain the desired surface temperatures. The modification consists of a dynamic control of the secondary cooling, surface-temperature monitoring by means of a numerical model of the temperature field as well as a prospective replacement of the cooling nozzles. In order to optimize and control the secondary cooling, characteristics of the nozzles, especially the influences of the water-flow rate, air pressure, casting speed, surface temperatures and heat-transfer coefficient under the nozzles have to be known. Moreover, the heat-transfer coefficient can also be influenced by the age of the nozzles. The paper deals with the relationships between these influences and their impacts on the temperature field of a cast slab. The results are presented for the 1530 mm x 250 mm slabs that are cast in Evraz Vítkovice Steel where the main author's dynamic, 3D solidification model is used, in its off-line version, to control the production interface. The results can be used for the preparation of a real casting process.Vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 47, št. 3, maj-jun. 2013, str. 311-316)Vrsta gradiva - članek, sestavni delLeto - 2013Jezik - angleškiCOBISS.SI-ID - 998570
vir: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 47, št. 3, maj-jun. 2013, str. 311-316)
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|---|
Stetina, Jozef | |
Mauder, Tomás | |
Klimes, Lubomir | |
Kavička, František |
Vir: Osebne bibliografije
in: SICRIS
Izberite prevzemno mesto:
Prevzem gradiva po pošti
Naslov za dostavo:
Med podatki člana manjka naslov.
Storitev za pridobivanje naslova trenutno ni dostopna, prosimo, poskusite še enkrat.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrano prevzemno mesto in naslov za dostavo ter dokončali postopek rezervacije.
S klikom na gumb "V redu" boste potrdili zgoraj izbrani naslov za dostavo in dokončali postopek rezervacije.
Obvestilo
Trenutno je storitev za avtomatsko prijavo in rezervacijo nedostopna. Gradivo lahko rezervirate sami na portalu Biblos ali ponovno poskusite tukaj kasneje.
Gesla v Splošnem geslovniku COBISS
Izbira mesta prevzema
Gradivo iz matične enote je brezplačno. Če je gradivo na mesto prevzema dostavljeno iz drugih enot, lahko knjižnica to storitev zaračuna.
Mesto prevzema | Status gradiva | Rezervacija |
---|
Rezervacija v teku
Prosimo, počakajte trenutek.
Rezervacija je uspela.
Rezervacija ni uspela.
Rezervacija...
Članska izkaznica:
Mesto prevzema:
Naročanje gradiva za izposojo v čitalnice
Naročanje kopij člankov
Urnik dostave gradiva z oznako DS v signaturi