In vitro mass propagation of apple plants plays an important role in the rapid multiplication of genetically uniform, disease-free scions and rootstocks with desired traits. Successful ...micropropagation of apple using axillary shoot cultures is influenced by several factors, the most critical of which is the cytokinin included in the culture medium. The impact of medium composition from single added cytokinins on shoot proliferation of apple scion Húsvéti rozmaring cultured on agar-agar gelled Murashige and Skoog medium fortified with indole butyric acid and gibberellic acid was investigated. The optimum concentration for efficient shoot multiplication differs according to the type of cytokinin. The highest significant multiplication rate (5.40 shoots/explant) was achieved using 2.0 μM thidiazuron while the longest shoots (1.80 cm) were observed on the medium containing benzyladenine at a concentration of 2.0 μM. However, application of either thidiazuron or benzyladenine as cytokinin source in the medium resulted in shoots of low quality, such as stunted and thickened shoots with small leaves. In the case of benzyladenine riboside, the 8 μM concentration was the most effective in increasing the multiplication rate (4.76 shoots/explant) but caused thickened stem development with tiny leaves. In the present study, meta-topolin was shown to be the most effective cytokinin that could be applied to induce sufficient multiplication (3.28 shoots/explant) and high-quality shoots along with shoot lengths of 1.46 cm when it was applied at concentrations of 4 μM. However, kinetin was the least active cytokinin; it practically did not induce the development of new shoots. The superior cytokinin for in vitro axillary shoot development of apple scion Húsvéti rozmaring with high-quality shoots was the meta-topolin, but it may be different depending on the variety/genotype under study.
Natural fibers are an important source for producing polymers, which are highly applicable in their nanoform and could be used in very broad fields such as filtration for water/wastewater treatment, ...biomedicine, food packaging, harvesting, and storage of energy due to their high specific surface area. These natural nanofibers could be mainly produced through plants, animals, and minerals, as well as produced from agricultural wastes. For strengthening these natural fibers, they may reinforce with some substances such as nanomaterials. Natural or biofiber-reinforced bio-composites and nano–bio-composites are considered better than conventional composites. The sustainable application of nanofibers in agricultural sectors is a promising approach and may involve plant protection and its growth through encapsulating many bio-active molecules or agrochemicals (i.e., pesticides, phytohormones, and fertilizers) for smart delivery at the targeted sites. The food industry and processing also are very important applicable fields of nanofibers, particularly food packaging, which may include using nanofibers for active–intelligent food packaging, and food freshness indicators. The removal of pollutants from soil, water, and air is an urgent field for nanofibers due to their high efficiency. Many new approaches or applicable agro-fields for nanofibers are expected in the future, such as using nanofibers as the indicators for CO and NH3. The role of nanofibers in the global fighting against COVID-19 may represent a crucial solution, particularly in producing face masks.
Human health and its improvement are the main target of several studies related to medical, agricultural and industrial sciences. The human health is the primary conclusion of many studies. The ...improving of human health may include supplying the people with enough and safe nutrients against malnutrition to fight against multiple diseases like COVID-19. Biofortification is a process by which the edible plants can be enriched with essential nutrients for human health against malnutrition. After the great success of biofortification approach in the human struggle against malnutrition, a new biotechnological tool in enriching the crops with essential nutrients in the form of nanoparticles to supplement human diet with balanced diet is called nano-biofortification. Nano biofortification can be achieved by applying the nano particles of essential nutrients (e.g., Cu, Fe, Se and Zn) foliar or their nano-fertilizers in soils or waters. Not all essential nutrients for human nutrition can be biofortified in the nano-form using all edible plants but there are several obstacles prevent this approach. These stumbling blocks are increased due to COVID-19 and its problems including the global trade, global breakdown between countries, and global crisis of food production. The main target of this review was to evaluate the nano-biofortification process and its using against malnutrition as a new approach in the era of COVID-19. This review also opens many questions, which are needed to be answered like is nano-biofortification a promising solution against malnutrition? Is COVID-19 will increase the global crisis of malnutrition? What is the best method of applied nano-nutrients to achieve nano-biofortification? What are the challenges of nano-biofortification during and post of the COVID-19?
The field of biotechnology presents us with a great chance to use many organisms, such as mushrooms, to find suitable solutions for issues that include the accumulation of agro-wastes in the ...environment. The green biotechnology of mushrooms (Pleurotus ostreatus L.) includes the myco-remediation of polluted soil and water as well as bio-fermentation. The circular economy approach could be effectively achieved by using oyster mushrooms (Pleurotus ostreatus L.), of which the substrate of their cultivation is considered as a vital source for producing biofertilizers, animal feeds, bioenergy, and bio-remediators. Spent mushroom substrate is also considered a crucial source for many applications, including the production of enzymes (e.g., manganese peroxidase, laccase, and lignin peroxidase) and bioethanol. The sustainable management of agro-industrial wastes (e.g., plant-based foods, animal-based foods, and non-food industries) could reduce, reuse and recycle using oyster mushrooms. This review aims to focus on the biotechnological applications of the oyster mushroom (P. ostreatus L.) concerning the field of the myco-remediation of pollutants and the bio-fermentation of agro-industrial wastes as a sustainable approach to environmental protection. This study can open new windows onto the green synthesis of metal-nanoparticles, such as nano-silver, nano-TiO2 and nano-ZnO. More investigations are needed concerning the new biotechnological approaches.
The health sector is critical to the well-being of any country, but developing countries have several obstacles that prevent them from providing adequate health care. This became an even larger ...concern after the COVID-19 outbreak left millions of people dead worldwide and generated huge amounts of infected or potentially infected wastes. The management and disposal of medical wastes during and post-COVID-19 represent a major challenge in all countries, but this challenge is particularly great for developing countries that do not have robust waste disposal infrastructure. The main problems in developing countries include inefficient treatment procedures, limited capacity of healthcare facilities, and improper waste disposal procedures. The management of medical wastes in most developing countries was primitive prior to the pandemic. The improper treatment and disposal of these wastes in our current situation may further speed COVID-19 spread, creating a serious risk for workers in the medical and sanitation fields, patients, and all of society. Therefore, there is a critical need to discuss emerging challenges in handling, treating, and disposing of medical wastes in developing countries during and after the COVID-19 outbreak. There is a need to determine best disposal techniques given the conditions and limitations under which developing countries operate. Several open questions need to be investigated concerning this global issue, such as to what extent developing countries can control the expected environmental impacts of COVID-19, particularly those related to medical wastes? What are the projected management scenarios for medical wastes under the COVID-19 outbreak? And what are the major environmental risks posed by contaminated wastes related to COVID-19 treatment? Studies directed at the questions above, careful planning, the use of large capacity mobile recycling facilities, and following established guidelines for disposal of medical wastes should reduce risk of COVID-19 spread in developing countries.
Graphical abstract
Selenium and nano-selenium in agroecosystems El-Ramady, Hassan R; Domokos-Szabolcsy, Éva; Abdalla, Neama A ...
Environmental chemistry letters,
12/2014, Letnik:
12, Številka:
4
Journal Article
Recenzirano
Selenium (Se) is an essential health element becoming rare in food as a result of intensive plant production. Indeed, several enzymes contain selenium in the form of the unusual selenocysteine amino ...acid. Selenium was found an essential nutrient in the late 1950s, when selenium was found to replace vitamin E in the diets of rats and chicks for the prevention of vascular, muscular, and hepatic lesions. At that time, selenium was considered solely as a toxic element in the northern Great Plains of the USA, because selenium was associated with the ‘alkali disease’ of grazing livestock. The major source of Se in soils is the weathering of Se-containing rocks. Secondary sources are volcanic activities, dusts such as in the vicinity of coal burning, Se-containing fertilizers, and some waters. Se cycles through the food system; Se is first removed from soils by plants and soil microorganisms, which can take up Se into their proteins and produce volatile forms such as dimethylselenide. Dimethylselenide enters the atmosphere to be brought down with precipitation and airborne particulates. Here, we review Se in agroecosystems. We focus on the production, biological effects, and use of nano-selenium particles.
The production of micropropagated plants in plant-tissue-culture laboratories and nurseries is the most important method for propagation of many economic plants. Micropropagation based on ...tissue-culture technology involves large-scale propagation, as it allows multiplication of a huge number of true-to-type propagules in a very short time and in a very limited space, as well as all year round, regardless of the climate. However, applying plant-tissue-culture techniques for the commercial propagation of plants may face a lot of obstacles or troubles that could result from technical, biological, physiological, and/or genetical reasons, or due to overproduction or the lack of facilities and professional technicians, as shown in the current study. Moreover, several disorders and abnormalities are discussed in the present review. This study aims to show the most serious problems and obstacles of plant micropropagation, and their solutions from both scientific and technical sides. This review, as a first report, includes different challenges in plant micropropagation (i.e., contamination, delay of subculture, burned plantlets, browning, in vitro rooting difficulty, somaclonal variations, hyperhydricity, shoot tip necrosis, albino plantlets, recalcitrance, shoot abnormalities, in vitro habituation) in one paper. Most of these problems are related to scientific and/or technical reasons, and they could be avoided by following the micropropagation protocol suitable for each plant species. The others are dominant in plant-tissue-culture laboratories, in which facilities are often incomplete, or due to poor infrastructure and scarce funds.
Soil salinity is a serious global problem that threatens a high percentage of the global soils. Salinity stress can create ionic, oxidative, and osmotic stress, along with hormonal imbalances, in ...stressful plants. This kind of stress was investigated on agricultural productivity at different levels, starting in vitro (plant tissue culture), through hydroponics, pots, and field conditions. Several approaches were studied for managing salinity stress, including using traditional materials (e.g., gypsum, sulfur), organic amendments (e.g., compost, biochar, chitosan), and applied manufactured or engineered nanomaterials (NMs). Application of nanomaterials for ameliorating salinity stress has gained great attention due to their high efficiency, eco-friendliness, and non-toxicity, especially biological nanomaterials. The application of NMs did not only support growing stressful plants under salinity stress but also increased the yield of crops, provided an economically feasible nutrient management approach, and was environmentally robust for sustainable crop productivity. Nano-management of salinity may involve applying traditional nano-amendments, biological nanomaterials, nano-enabled nutrients, nano-organic amendments, derived smart nanostructures, and nano-tolerant plant cultivars. Producing different plant cultivars that are tolerant to salinity can be achieved using conventional breeding and plantomics technologies. In addition to the large-scale use of nanomaterials, there is an urgent need to address and treat nanotoxicity. This study aims to contribute to this growing area of research by exploring different approaches for nano-management of current practices under salinity stress under field and in vitro conditions. This study also raises many questions regarding the expected interaction between the toxic effects of salinity and NMs under such conditions. This includes whether this interaction acts positively or negatively on the cultivated plants and soil biological activity, or what regulatory ecotoxicity tests and protocols should be used in research.
The agricultural sector is a vital source of human well-being that provides the necessities of daily life. A variety of farming systems are utilized in agriculture, such as a wide range of tillage ...options, no-till, agroforestry, precision farming, organic farming, cover cropping, crop rotations, etc. Each of these farming systems has unique challenges, and nanotechnology has successfully improved on many of them. Agricultural applications of nanotechnology include nanofertilizers, nanopesticides, nanosensors, nanobiotechnology, and nanoremediation. This study focuses on the application of nano-farming technologies to different farming systems. Suggested practices include nano improvement of soil quality, crop nano-protection under biotic stress, nanoremediation of polluted soil and water environments, nanomanagement of agro-wastes, nano-agrochemicals, nano-precision farming, and nanobiotechnology for modern farming. This review also addresses expected problems that may occur due to over application of nanomaterials to farming systems, such as nanopollution and nanotoxicity of agroecosystem compartments. Several dimensions are emphasized in this study, such as green energy, sustainable development, the circular bioeconomy, land biodegradation, pollution, and the one health approach, as essential for the global goals of sustainable development. Nanofarming presents both benefits and obstacles to human life. The exact balance between these benefits and challenges needs more study.
Natural resources including water, energy, and food have an increase in demand due to the global population increases. The sustainable management of these resources is an urgent global issue. These ...resources combined in a very vital nexus are called the water–energy–food (WEF) nexus. The field of nanotechnology offers promising solutions to overcome several problems in the WEF nexus. This review is the first report that focuses on the suggested applications of nanofibers in the WEF sectors. An economic value of nanofibers in WEF sectors was confirmed, which was mainly successfully applied for producing clean water, sustainable energy, and safe food. Biotechnological solutions of nanofibers include various activities in water, energy, and food industries. These activities may include the production of fresh water and wastewater treatment, producing, converting, and storing energy, and different activities in the food sector. Furthermore, microbial applications of nanofibers in the biomedicine sector, and the most important biotechnological approaches, mainly plant tissue culture, are the specific focus of the current study. Applying nanofibers in the field of plant tissue culture is a promising approach because these nanofibers can prevent any microbial contamination under in vitro conditions, but the loss of media by evaporation is the main challenge in this application. The main challenges of nanofiber production and application depend on the type of nanofibers and their application. Different sectors are related to almost all activities in our life; however, enormous open questions still need to be answered, especially the green approach that can be used to solve the accumulative problems in those sectors. The need for research on integrated systems is also urgent in the nexus of WEF under the umbrella of environmental sustainability, global climate change, and the concept of one’s health.