Abstract
In the study, a biomimetic platform for anti-inflammatory-based treatment of atherosclerotic plaque was developed. Gliclazide (GL) as an anti-inflammasome agent was encapsulated in PLGA ...nanoparticles (NP), which were coated by monocyte membrane using an extrusion procedure. The size and zeta potential of the nanoghost (NG) changed to 292 and – 10 nm from 189.5 to −34.1 in the core NP. In addition, the actual size of 62.5 nm with a coating layer of 5 nm was measured using TEM. The NG was also showed a sustained release profile with the drug loading content of about 4.7%. Beside to attenuated TNFα, decrease in gene expression levels of NLRP3, MyD88, NOS, IL-1β, IL-18 and caspases 1/3/8/9 in LPS-primed monocytes exposed to NG strongly indicated remarkable inflammation control. After systemic toxicity evaluation and pharmacokinetic analysis of NP and NG, intravenous NG treatment of rabbits with experimentally induced atherosclerosis revealed remarkably less plaque lesions, foam cells, lipid-laden macrophages, and pathological issues in tunica media of aorta sections. Higher expression of CD163 than CD68 in aorta of NG-treated rabbits strongly reveals higher M2/M1 macrophage polarization. The bio/hemocompatible, biomimetic and anti-inflammatory NG can be considered as a potential platform for immunotherapy of particularly atherosclerosis in the field of personalized medicine.
Arginine‐glycine‐aspartic acid (RGD) peptide family is known as the most prominent ligand for extracellular domain of integrin receptors. Specific expression of these receptors in various tissue of ...human body and tight association of their expression profile with various pathophysiological conditions made these receptors a suitable targeting candidate for several disease diagnosis and treatment as well as regeneration of various organs. For these reasons, various forms of RGD‐based integrins ligands have been greatly used in biomedical studies. Here, we summarized the last decade application progress of RGD for cancer theranostics, control of inflammation, thrombosis inhibition and critically discussed the effect of RGD peptides structure and sequence on the efficacy of gene/drug delivery systems in preclinical studies. Furthermore, we will show recent advances in application of RGD functionalized biomaterials for various tissue regenerations including cornea repair, artificial neovascularization and bone tissue regeneration. Finally, we analyzed clinically translatability of RGD peptides, considering examples of integrin ligands in clinical trials. In conclusion, prospects on using RGD peptide for precise drug delivery and biomaterial engineering are well discussed.
Nano-bio interactions are size-dependent. The present study investigates whether core-shell chitosan-alginate particle size governs biological activities as well as protein release profile. A coaxial ...electrospraying was used to fabricate bovine serum albumin (BSA)-loaded core-shell micro/nanoparticles and were fully characterized. The bio/hemocompatibility of the particles was assessed using MTT and hemolytic assays, respectively, followed by the uptake assessment using flow cytometry. Finally, protein absorption was investigated using SDS-PAGE. The SEM size of the microparticles, the hydrodynamic, and the actual sizes of the nanoparticles were 1.2 μm, 90.49 nm, and 50 nm, respectively. Interactions among two polymers and BSA were observed using DSC analysis. BET analysis showed a more surface area for nanoparticles. A sustained release trend of BSA was observed after 14- and 10-day for microparticles and nanoparticles, respectively. Microparticles exhibited excellent hemocompatibility (< 5% hemolysis) and cell viability (at least > 70%) in all concentrations. However, acceptable hemolytic activity and cell viability were observed for nanoparticles in concentrations below 250 μg/mL. Furthermore, nanoparticles showed greater cellular uptake (~ 4 folds) and protein absorption (~ 1.61 folds) than microparticles. Overall, the developed core-shell chitosan-alginate particles in the micro/nanoscale can be promising candidates for biomedical application and regenerative medicine regarding their effects on above mentioned biological activities.
•Thirty-four papers included in this review.•Parameters were investigated on how the LWIs can be more beneficial.•For footwear, barefoot mimicking soles produced the most favourable ...biomechanics.•Insoles work in correcting the position of the knee.•Studies do not show how insoles affects patients’ pain and function.
Knee osteoarthritis is a disease of the joint causing decreased function and pain. Currently, treatments range from medication to surgery, with the use of different insoles and footwear recommended. These methods are effective by either correcting the position of the knee or providing shock absorption. However, there is little understanding of the effective characteristics of these devices.
This paper aims to investigate this question and provide future areas of research to help better define treatment guidelines. Foot orthoses are an example of non-pharmacological conservative treatments mentioned in National Institute for Health and Care Excellence (NICE) guidelines to treat knee osteoarthritis (OA). These include lateral wedge insoles (LWI), developed with the intention of load reduction of the knee. Different footwear has also been shown to affect pain, biomechanical and functional outcomes in knee OA patients.
To address what features of LWIs and footwear make them effective in the treatment of knee OA, scientific databases were used to search for papers on this topic and then selected to be included based on pre-defined criteria. Data were extracted and analysed from these studies to provide a basis for possible areas for future development of these foot orthoses, and research required to improve clinical treatment guidelines. Databases used were PubMed, Scopus and Web of Science.
Thirty-four out of 226 papers were included after application of inclusion and exclusion criteria. Regarding LWIs, the characteristics showing the most beneficial effect on either biomechanical, functional or pain outcomes were customisation, full-length, 5° elevation, shock absorption and arch support. For footwear, barefoot mimicking soles produced the most favourable biomechanics. Results also showed that insoles work in correcting the position of the knee, but it may or may not affect patients’ pain and function.
In the present study, and for the waste valorization, Moringa oleifera seeds-removed ripened pods (SRRP) were used for papersheet production and for the extraction of bioactive compounds. Fibers were ...characterized by SEM-EDX patterns, while the phytoconstituents in ethanol extract was analyzed by HPLC. The inhibition percentage of fungal mycelial growth (IFMG) of the treated Melia azedarach wood with M. oleifera SRRP extract at the concentrations of 10,000, 20,000, and 30,000 µg/mL against the growth of Rhizoctonia solani and Fusarium culmorum was calculated and compared with fluconazole (25 µg). The produced papersheet was treated with the ethanol extract (4000, 2000, and 1000 µg/mL) and assayed for its antibacterial activity against Agrobacterium tumefaciens, Erwinia amylovora, and Pectobacterium atrosepticum by measuring the inhibition zones and minimum inhibitory concentrations (MICs). According to chemical analysis of M. oleifera SRRP, benzene:alcohol extractives, holocellulose, lignin, and ash contents were 7.56, 64.94, 25.66 and 1.53%, respectively, while for the produced unbleached pulp, the screen pulp yield and the Kappa number were 39% and 25, respectively. The produced papersheet showed tensile index, tear index, burst index, and double fold number values of 58.8 N m/g, 3.38 mN m
/g, 3.86 kPa m
/g, and 10.66, respectively. SEM examination showed that the average fiber diameter was 16.39 µm, and the mass average of for elemental composition of C and O by EDX were, 44.21%, and 55.79%, respectively. The main phytoconstituents in the extract (mg/100 g extract) by HPLC were vanillic acid (5053.49), benzoic acid (262.98), naringenin (133.02), chlorogenic acid (66.16), and myricetin (56.27). After 14 days of incubation, M. oleifera SRRP extract-wood treated showed good IFMG against R. solani (36.88%) and F. culmorum (51.66%) compared to fluconazole, where it observed 42.96% and 53.70%, respectively. Moderate to significant antibacterial activity was found, where the minimum inhibitory concentration (MIC) values were 500, 650, and 250 µg/mL against the growth of A. tumefaciens, E. amylovora, and P. atrosepticum respectively, which were lower than the positive control used (Tobramycin 10 µg/disc). In conclusion, M. oleifera SRRP showed promising properties as a raw material for pulp and paper production as well as for the extraction of bioactive compounds.
Africa is the second populous continent, and its population has the fastest growing rate. Some African countries are still plagued by poverty, poor sanitary conditions and limited resources, such as ...clean drinking water, food supply, electricity, and effective waste management systems. Underfunded healthcare systems, poor training and lack of awareness of policies and legislations on handling medical waste have led to increased improper handling of waste within hospitals, healthcare facilities and transportation and storage of medical waste. Some countries, including Ethiopia, Botswana, Nigeria and Algeria, do not have national guidelines in place to adhere to the correct disposal of such wastage. Incineration is often the favoured disposal method due to the rapid diminishment of up to 90% of waste, as well as production of heat for boilers or for energy production. This type of method – if not applying the right technologies – potentially creates hazardous risks of its own, such as harmful emissions and residuals. In this study, the sustainability aspects of medical waste management in Africa were reviewed to present resilient solutions for health and environment protection for the next generation in Africa. The findings of this research introduce policies, possible advices and solutions associated with sustainability and medical waste management that can support decision-makers in developing strategies for the sustainability by using the eco-friendly technologies for efficient medical waste treatment and disposal methods and also can serve as a link between the healthcare system, decision-makers, and stakeholders in developing health policies and programmes.
Diabetic foot ulcers (DFUs) are a serious complication for people with diabetes. They result in increased morbidity and pressures on health system resources. Developments in machine learning (ML) ...offer an opportunity for improved care of individuals at risk of DFUs, to identify and synthesise evidence about the current uses and accuracy of ML in the interventional care and management of DFUs, and, to provide a reference for areas of future research. PubMed, Google Scholar, Web of Science and Scopus were searched using the Preferred Reporting Items for a Systematic Review and Meta-analysis of Diagnostic Test Accuracy Studies (PRISMA-DTA) guidelines for papers involving ML and DFUs. In order to be included, studies needed to mention ML, DFUs, and report relevant outcome measures regarding ML algorithm accuracy. Bias in included studies was assessed using the quality assessment tool for diagnostic accuracy (QUADAS-2). 37 out of 3769 papers were included after applying eligibility criteria. Included papers reported accuracy measures for multiple types of ML algorithms in DFU studies. Whilst varying across the ML algorithm used, all studies reported at least 90% accuracy compared to gold standards using a minimum of one reported ML algorithm for processing or recording data. Applications where ML had positive effects on DFU data analysis and outcomes include image segmentation and classification, raw data analysis and risk assessment. ML offers an effective and accurate solution to guide analysis and procurement of data from interventions which are designed for the care of DFUs in small samples and study conditions. Current research is limited, and, for the development of more applicable ML algorithms, future research should address the following: direct comparison of ML applications with current standards of care, health economic analyses and large scale data collection. There is currently no evidence to confidently suggest that ML methods in DFU diagnosis are ready for implementation and use in healthcare settings.
This study presents a novel approach inspired by the hexagonal honeycomb structure found in nature, leveraging image processing algorithms to precisely define complex geometries in thermal systems. ...Hexagonal phase change material containers and thermally conductive fins were meticulously delineated, mirroring the intricate real-world designs of honeycombs. This innovative methodology not only streamlines setup processes but also enhances our understanding of melting dynamics within enclosures, highlighting the potential benefits of biomimetic design principles in engineering applications. Two distinct honeycomb structures were employed to investigate their impact on the melting process within cavities subject to heating from the left wall, with the remaining walls treated as adiabatic surfaces. The incorporation of a thermally conductive fin system within the enclosure significantly reduced the time required for a complete phase change, emphasizing the profound influence of fin systems on thermal design and performance. This enhancement in heat transfer dynamics makes fin systems advantageous for applications prioritizing precise temperature control and expedited phase change processes. Furthermore, the critical role of the fin system design was emphasized, influencing both the onset and location of the final point of melting. This underscores the importance of tailoring fin systems to specific applications to optimize their performance. Our study highlights the significant impact of the Rayleigh (Ra) number on the melting time in a cavity without fins, revealing a decrease from 6 to 0.4 as the Ra increased from 102 to 105; the introduction of a fin system uniformly reduced the melting time to Ste.Fo = 0.5, indicating fins’ universal effectiveness in optimizing thermal dynamics and expediting the melting process. Moreover, the cavity angle was found to significantly affect the fluid fraction diagram in unfanned cavities but had minimal impact when fins were present, highlighting the stabilizing role of fins in mitigating gravitational effects during melting processes. These insights expand our understanding of cavity geometry and fin interactions in heat transfer, offering potential for enhanced thermal system designs in various engineering applications. Decreasing thermal conductivity (λ) by increasing the fin thickness can halve the melting time, but the accompanying disadvantages include a heavier system and reduced energy storage due to less phase change material, necessitating a careful balance in decision-making.
4D printing technology in medical engineering: a narrative review Sahafnejad-Mohammadi, Iman; Karamimoghadam, Mojtaba; Zolfagharian, Ali ...
Journal of the Brazilian Society of Mechanical Sciences and Engineering,
06/2022, Letnik:
44, Številka:
6
Journal Article
Odprti dostop
The addition of the time dimension to three-dimensional (3D) printing has introduced four-dimensional (4D) printing technology, which has gained considerable attention in different fields such as ...medical, art, and engineering. Nowadays, bioscience has introduced some ideas which can be fulfilled by 4D printing. Blending time with variations caused by the situation has many beneficial aspects such as perceptibility and adaptability. Since 4D printing can create a dynamic structure with stimuli-responsive materials, the applications of smart materials, stimulus, and 3D printing are the effective criteria in 4D printing technology. Smart materials with their flexible properties can reshape, recolor, or change function under the effect of the internal or exterior stimuli. Thus, an attractive prospect in the medical field is the integration of the 4D printing approach along with smart materials. This research aims to show the most recent applications of 4D printing technology and smart materials in medical engineering which can show better prospective of 4D printing applications in the future. Also, it describes smart medical implants, tissue engineering, and bioprinting and how they are being used for the 4D printing approach in medical engineering applications. In this regard, a particular emphasis is dedicated to the latest progress in the innovation and development of stimuli-responsive materials that are activated and respond over time to physical, chemical, and biological stimuli and their exploitation through 3D printing methods to fabrication 4D printing smart parts such as intelligent tissue-engineered scaffolds, smart orthopedic implants, and targeted drug delivery systems. On the other hand, major challenges in this technology are explained along with some suggestions for future works to address existing limitations. It is worth noting that despite significant research that has been carried out into 4D printing, it might be more valuable if some investigation is done into 4D bio-printing applications and how this approach will be developed.
Recently, transcatheter aortic valve replacement (TAVR) has been suggested as a less invasive treatment compared to surgical aortic valve replacement, for patients with severe aortic stenosis. ...Despite the attention, persisting evidence suggests that several procedural complications are more prevalent with the transcatheter approach. Consequently, a systematic review was undertaken to evaluate the application of three-dimensional (3D) printing in preoperative planning for TAVR, as a means of predicting and subsequently, reducing the incidence of adverse events. MEDLINE, Web of Science and Embase were searched to identify studies that utilised patient-specific 3D printed models to predict or mitigate the risk of procedural complications. 13 of 219 papers met the inclusion criteria of this review. The eligible studies have shown that 3D printing has most commonly been used to predict the occurrence and severity of paravalvular regurgitation, with relatively high accuracy. Studies have also explored the usefulness of 3D printed anatomical models in reducing the incidence of coronary artery obstruction, new-onset conduction disturbance and aortic annular rapture. Patient-specific 3D models can be used in pre-procedural planning for challenging cases, to help deliver personalised treatment. However, the application of 3D printing is not recommended for routine clinical practice, due to practicality issues.