Context. Information about the spin state of asteroids is important for our understanding of the dynamical processes affecting them. However, spin properties of asteroids are known for only a small ...fraction of the whole population. Aims. To enlarge the sample of asteroids with a known rotation state and basic shape properties, we combined sparse-in-time photometry from the Lowell Observatory Database with flux measurements from NASA’s WISE satellite. Methods. We applied the light curve inversion method to the combined data. The thermal infrared data from WISE were treated as reflected light because the shapes of thermal and visual light curves are similar enough for our purposes. While sparse data cover a wide range of geometries over many years, WISE data typically cover an interval of tens of hours, which is comparable to the typical rotation period of asteroids. The search for best-fitting models was done in the framework of the Asteroids@home distributed computing project. Results. By processing the data for almost 75 000 asteroids, we derived unique shape models for about 900 of them. Some of them were already available in the DAMIT database and served us as a consistency check of our approach. In total, we derived new models for 662 asteroids, which significantly increased the total number of asteroids for which their rotation state and shape are known. For another 789 asteroids, we were able to determine their sidereal rotation period and estimate the ecliptic latitude of the spin axis direction. We studied the distribution of spins in the asteroid population. Apart from updating the statistics for the dependence of the distribution on asteroid size, we revealed a significant discrepancy between the number of prograde and retrograde rotators for asteroids smaller than about 10 km. Conclusions. Combining optical photometry with thermal infrared light curves is an efficient approach to obtaining new physical models of asteroids. The amount of asteroid photometry is continuously growing and joint inversion of data from different surveys could lead to thousands of new models in the near future.
Context. Mars-crossing asteroids (MCs) are a dynamically unstable group between the main belt and the near-Earth populations. Characterising the physical properties of a large sample of MCs can help ...to understand the original sources of many near-Earth asteroids, some of which may produce meteorites on Earth. Aims. Our aim is to provide diameters and albedos of MCs with available WISE/NEOWISE data. Methods. We used the near-Earth asteroid thermal model to find the best-fitting values of equivalent diameter and, whenever possible, the infrared beaming parameter. With the diameter and tabulated asteroid absolute magnitudes we also computed the visible geometric albedos. Results. We determined the diameters and beaming parameters of 404 objects observed during the fully cryogenic phase of the WISE mission, most of which have not been published elsewhere. We also obtained 1572 diameters from data from the 3-Band and posterior non-cryogenic phases using a default value of beaming parameter. The average beaming parameter is 1.2 ± 0.2 for objects smaller than 10 km, which constitute most of our sample. This is higher than the typical value of 1.0 found for the whole main belt and is possibly related to the fact that WISE is able to observe many more small objects at shorter heliocentric distances, i.e. at higher phase angles. We argue that this is a better default value for modelling Mars-crossing asteroids from the WISE/NEOWISE catalogue and discuss the effects of this choice on the diameter and albedo distributions. We find a double-peaked distribution for the visible geometric albedos, which is expected since this population is compositionally diverse and includes objects in the major spectral complexes. However, the distribution of beaming parameters is homogeneous for both low- and high-albedo objects.
•We analyze the WISE thermal infrared data of nine asteroids by means of a thermophysical model (TPM).•We present a novel thermophysical approach – varied shape TPM (VS-TPM).•We consider the ...uncertainties of the shape model and the pole orientation in the TPM.•We show that the uncertainties of the shape model and the pole orientation can be very important.
In the analysis of thermal infrared data of asteroids by means of thermophysical models (TPMs) it is a common practice to neglect the uncertainty of the shape model and the rotational state, which are taken as an input for the model. Here, we present a novel method of investigating the importance of the shape model and the pole orientation uncertainties in the thermophysical modeling – the varied shape TPM (VS-TPM). Our method uses optical photometric data to generate various shape models that map the uncertainty in the shape and the rotational state. The TPM procedure is then run for all these shape models. We apply the implementation of the classical TPM as well as our VS-TPM to the convex shape models of several asteroids together with their thermal infrared data acquired by the NASA’s Wide-field Infrared Survey Explorer (WISE) and compare the results. These show that the uncertainties of the shape model and the pole orientation can be very important (e.g., for the determination of the thermal inertia) and should be considered in the thermophysical analyses. We present thermophysical properties for six asteroids – (624) Hektor, (771) Libera, (1036) Ganymed, (1472) Muonio, (1627) Ivar, and (2606) Odessa.
Context. The near-Earth asteroid (3200) Phaethon is an intriguing object: its perihelion is at only 0.14 au and is associated with the Geminid meteor stream. Aims. We aim to use all available ...disk-integrated optical data to derive a reliable convex shape model of Phaethon. By interpreting the available space- and ground-based thermal infrared data and Spitzer spectra using a thermophysical model, we also aim to further constrain its size, thermal inertia, and visible geometric albedo. Methods. We applied the convex inversion method to the new optical data obtained by six instruments and to previous observations. The convex shape model was then used as input for the thermophysical modeling. We also studied the long-term stability of Phaethon’s orbit and spin axis with a numerical orbital and rotation-state integrator. Results. We present a new convex shape model and rotational state of Phaethon: a sidereal rotation period of 3.603958(2) h and ecliptic coordinates of the preferred pole orientation of (319°, −39°) with a 5° uncertainty. Moreover, we derive its size (D = 5.1 ± 0.2 km), thermal inertia (Γ = 600 ± 200 J m–2 s–1/2 K–1), geometric visible albedo (pV = 0.122 ± 0.008), and estimate the macroscopic surface roughness. We also find that the Sun illumination at the perihelion passage during the past several thousand years is not connected to a specific area on the surface, which implies non-preferential heating.
The AKARI IRC all-sky survey provided more than twenty thousand thermal infrared observations of over five thousand asteroids. Diameters and albedos were obtained by fitting an empirically calibrated ...version of the standard thermal model to these data. After the publication of the flux catalogue in October 2016, our aim here is to present the AKARI IRC all-sky survey data and discuss valuable scientific applications in the field of small body physical properties studies. As an example, we update the catalogue of asteroid diameters and albedos based on AKARI using the near-Earth asteroid thermal model (NEATM). We fit the NEATM to derive asteroid diameters and, whenever possible, infrared beaming parameters. We fit groups of observations taken for the same object at different epochs of the survey separately, so we compute more than one diameter for approximately half of the catalogue. We obtained a total of 8097 diameters and albedos for 5170 asteroids, and we fitted the beaming parameter for almost two thousand of them. When it was not possible to fit the beaming parameter, we used a straight line fit to our sample’s beaming parameter-versus-phase angle plot to set the default value for each fit individually instead of using a single average value. Our diameters agree with stellar-occultation-based diameters well within the accuracy expected for the model. They also match the previous AKARI-based catalogue at phase angles lower than 50°, but we find a systematic deviation at higher phase angles, at which near-Earth and Mars-crossing asteroids were observed. The AKARI IRC All-sky survey is an essential source of information about asteroids, especially the large ones, since, it provides observations at different observation geometries, rotational coverages and aspect angles. For example, by comparing in more detail a few asteroids for which dimensions were derived from occultations, we discuss how the multiple observations per object may already provide three-dimensional information about elongated objects even based on an idealised model like the NEATM. Finally, we enumerate additional expected applications for more complex models, especially in combination with other catalogues.
•We analyze the thermal infrared data acquired by the NASAs Wide-field Infrared Survey Explorer of about 300 asteroids by means of a thermophysical model.•We report thermophysical properties such as ...size, thermal inertia, surface roughness or visible geometric albedo for more than one hundred asteroids.•The thermal inertia increases with decreasing size, but a large range of thermal inertia values is observed within the similar size ranges between D ∼ 10, 100 km.•The thermal inertia values seem to be consistent within several collisional families.
By means of a varied-shape thermophysical model of Hanuš et al. (2015) that takes into account asteroid shape and pole uncertainties, we analyze the thermal infrared data acquired by the NASA’s Wide-field Infrared Survey Explorer of about 300 asteroids with derived convex shape models. We utilize publicly available convex shape models and rotation states as input for the thermophysical modeling. For more than one hundred asteroids, the thermophysical modeling gives us an acceptable fit to the thermal infrared data allowing us to report their thermophysical properties such as size, thermal inertia, surface roughness or visible geometric albedo. This work more than doubles the number of asteroids with determined thermophysical properties, especially the thermal inertia. In the remaining cases, the shape model and pole orientation uncertainties, specific rotation or thermophysical properties, poor thermal infrared data or their coverage prevent the determination of reliable thermophysical properties. Finally, we present the main results of the statistical study of derived thermophysical parameters within the whole population of main-belt asteroids and within few asteroid families. Our sizes based on TPM are, in average, consistent with the radiometric sizes reported by Mainzer et al. (2016). The thermal inertia increases with decreasing size, but a large range of thermal inertia values is observed within the similar size ranges between D ∼ 10–100 km. We derived unexpectedly low thermal inertias ( < 20 J m−2 s−1/2 K−1) for several asteroids with sizes 10 < D < 50 km, indicating a very fine and mature regolith on these small bodies. The thermal inertia values seem to be consistent within several collisional families, however, the statistical sample is in all cases rather small. The fast rotators with rotation period P ≲ 4 h tend to have slightly larger thermal inertia values, so probably do not have a fine regolith on the surface. This could be explained, for example, by the loss of the fine regolith due to the centrifugal force, or by the ineffectiveness of the regolith production(e.g., by the thermal cracking mechanism of Delbo’ et al. 2014).
Context. Determining whether asteroids in cometary orbits (ACOs) are dormant or extinct comets is relevant for understanding the end-states of comets and the sizes of the comet population. Aims. We ...intend to study the value distributions of effective diameter (D), beaming parameter (η), and visible geometric albedo (pV) of ACO populations, which can be derived from NASA’s Wide-field Infrared Explorer (WISE) observations, and we aim to compare these with the same, independently determined properties of the comets. Methods. The near-Earth asteroid thermal model (NEATM) is used with WISE data and the absolute magnitude (H) of the ACOs to compute the D, pV and η. Results. We obtained D and pV for 49 ACOs in Jupiter family cometary orbits (JF-ACOs) and 16 ACOs in Halley-type cometary orbits (Damocloids). We also obtained the infrared beaming parameter η for 45 of them. All but three JF-ACOs (95% of the sample) present a low albedo compatible with a cometary origin. The pV and η distributions of both ACO populations are very similar. For the entire sample of ACOs, the mean geometric albedo is p̅V = 0.05±0.02, (p̅V = 0.05±0.01 and p̅V = 0.05±0.02 for JF-ACOs and for Damocloids, respectively) compatible with a narrow albedo distribution similar to that of the Jupiter family comets (JFCs), with a p̅V ~ 0.04. The mean beaming parameter is η̅ = 1.0±0.2. We find no correlations between D, pV, or η. We also compare the cumulative size distribution (CSD) of ACOs, Centaurs, and JFCs. Although the Centaur sample contains larger objects, the linear parts in their log-log plot of the CSDs presents a similar cumulative exponent (β = 1.85 ± 0.30 and 1.76 ± 0.35, respectively). The CSD for Damocloids presents a much shallower exponent β = 0.89 ± 0.17. Conclusions. The pV- and η-value distributions of ACOs are very similar to those of JF comet (JFCs) nuclei. The ACOs in Tancredi’s list are the best possible candidates to be dormant/inactive comets. The CSD for JF-ACOs is shallower and shifted towards larger diameters with respect to the CSD of active JFCs, which suggests that the mantling process has a size dependency whereby large comets tend to reach an inactive stage faster than small comets. Finally, the population of JF-ACOs is comparable in number with the population of JFCs, although there are more tens-km JF-ACOs than JFCs.
Thermal-infrared measurements of asteroids, satellites, and distant minor bodies are crucial for deriving the objects’ sizes, albedos, and in some cases, also the thermophysical properties of the ...surface material. Depending on the available measurements and auxiliary data, such as visual light curves, spin and shape information, or direct size measurements from occultations or high-resolution imaging techniques, a range of simple to complex thermal models are applied to achieve specific science goals. However, testing these models is often a difficult process and the uncertainties of the derived parameters are not easy to estimate. Here, we make an attempt to verify a widely accepted thermophysical model (TPM) against unique thermal infrared (IR), full-disk, and well-calibrated measurements of the Moon. The data were obtained by the High-resolution InfraRed Sounder (HIRS) instruments on board a fleet of Earth weather satellites that serendipitously scan the surface of the Moon. We found 22 Moon intrusions, taken in 19 channels between 3.75 μm and 15.0 μm, and over a wide phase angle range from −73.1° (waxing Moon) to +73.8° (waning Moon). These measurements include the entire Moon in a single pixel, seen almost simultaneously in all bands. The HIRS filters are narrow and outside the wavelength regime of the Christiansen feature. The similarity between these Moon data and typical asteroid spectral-IR energy distributions allows us to benchmark the TPM concepts and to point out problematic aspects. The TPM predictions match the HIRS measurements within 5% (10% at the shortest wavelengths below 5 μm) when using the Moon’s known properties (size, shape, spin, albedo, thermal inertia, roughness) in combination with a newly established wavelength-dependent hemispherical emissivity. In the 5–7.5 μm and in the 9.5–11 μm ranges, the global emissivity model deviates considerably from the known lunar sample spectra. Our findings will influence radiometric studies of near-Earth and main-belt asteroids in cases where only short-wavelength data (from e.g., NEOWISE, the warm Spitzer mission, or ground-based
M
-band measurements) are available. The new, full-disk IR Moon model will also be used for the calibration of IR instrumentation on interplanetary missions (e.g., for Hayabusa-2) and weather satellites.
Aims. Our aim is to obtain more information about the physical nature of B-type asteroids and extend previous work by studying their physical properties as derived from fitting an asteroid thermal ...model to their NASA’s Wide-field Infrared Survey Explorer (WISE) data. We also examine the Pallas collisional family, a B-type family with a moderately high albedo in contrast to the large majority of B-types. Methods. We applied a combination of the near-Earth asteroid thermal model and a model of the reflected sunlight to WISE asteroid data in order to derive up to four parameters: effective diameter (D), the so-called infrared beaming parameter (η), ratio of infrared to visible albedo (Rp = pIR/pV), and visible geometric albedo (pV). Results. We obtained the effective diameter, geometric visible albedo, infrared-to-visible albedo ratio, and beaming parameter for ≳ 100 B-types asteroids and plotted the value distributions of pV, Rp, and η (p̅V = 0.07 ± 0.03, R̅p = 1.0 ± 0.2, and η̅ = 1.0 ± 0.1). By combining the IR and visible albedos with 2.5 μm reflectances from the literature we obtained the ratio of reflectances at 3.4 and 2.5 μm, from which we found statistically significant indications that the presence of a 3-μm absorption band related to water may be commonplace among the B-types. Finally, the Pallas collisional family members studied (~50 objects) present moderately high values of pV, p̅V = 0.14 ± 0.05, which is significantly higher than the average albedo of B-types. In addition, this family presents the lowest and most homogeneously distributed Rp-values of our whole sample, which shows that this group is clearly different from the other B-types, probably because its members are fragments likely originating from the same region of (2) Pallas, a particularly high-albedo B-type asteroid.
ABSTRACT The so-called "early activity" of comet 67P/Churyumov-Gerasimenko has been observed to originate mostly in parts of the concave region or "neck" between its two lobes. Since activity is ...driven by the sublimation of volatiles, this is a puzzling result because this area is less exposed to the Sun and is therefore expected to be cooler on average. We used a thermophysical model that takes into account thermal inertia, global self-heating, and shadowing, to compute surface temperatures of the comet. We found that, for every rotation in the 2014 August-December period, some parts of the neck region undergo the fastest temperature variations of the comet's surface precisely because they are shadowed by their surrounding terrains. Our work suggests that these fast temperature changes are correlated to the early activity of the comet, and we put forward the hypothesis that erosion related to thermal cracking is operating at a high rate on the neck region due to these rapid temperature variations. This may explain why the neck contains some ice-as opposed to most other parts of the surface-and why it is the main source of the comet's early activity. In a broader context, these results indicate that thermal cracking can operate faster on atmosphereless bodies with significant concavities than implied by currently available estimates.
PDF
