At the CERN-ISOLDE facility a variety of radioactive ion beams are available to users of the facility. The number of extractable isotopes estimated from yield database data exceeds 1000 and is still ...increasing. Due to high demand and scarcity of available beam time, precise experiment planning is required. The yield database stores information about radioactive beam yields and the combination of target material and ion source needed to extract a certain beam along with their respective operating conditions. It allows to investigate the feasibility of an experiment and the estimation of required beamtime. With the increasing demand for ever more exotic beams, needs arise to extend the functionality of the database and website not only to provide information about yields determined experimentally, but also to predict yields of isotopes, which can only be measured with sophisticated setups. For the prediction of yields, in-target production and information about release properties of target materials must be known. While the former were estimated in a simulation campaign using FLUKA and ABRABLA codes, the latter is available from measurement data as already stored in the database. We have compiled the information necessary to predict yields, and made available a yield prediction tool as web application. This currently undergoes extensive testing and will be available as powerful tool to the ISOLDE user community.
The under-construction FRIB-EDM3-instrument was designed to study polar radioactive molecules (such as RaF) in transparent cryogenic solids by laser spectroscopy. The instrument is divided into a ...frontend- and a backend section. The frontend accepts an aqueous sample from isotope harvesting and provides a mass-separated molecular ion beam in an ultra-high vacuum environment. In the backend, the ions are guided into alkali-metal vapor and the resulting neutrals are co-deposited in a solid argon matrix to perform laser spectroscopy. This work addresses the frontend of the instrument. The efficient ionization of harvested radioisotopes from aqueous samples is achieved with a spray-ionization method. Subsequently, the molecular ion beam is analyzed by mass-to-charge ratio by a quadrupole mass filter. To verify the feasibility of the approach, numerical simulations with the COMSOL and SIMION packages have been conducted. While the former was applied to study transport in ion funnels, the latter was used to investigate ion beam transmission through the lower pressure sections. Following promising simulation results, a first experimental setup is under construction.
Gas stoppers have been used for a long-standing successful science program at Michigan State University with stopped and rare-isotope beams produced by projectile fragmentation. The National ...Superconducting Cyclotron Laboratory’s Coupled Cyclotron Facility has recently transitioned into the Facility for Rare Isotope Beams (FRIB) laboratory to provide rare isotopes using a high-power superconducting linear accelerator and new production facilities. To allow the science program with stopped and reaccelerated beams to continue during the transition period, a stand-alone capability was added. The Batch Mode Ion Source (BMIS) was built and has been providing beams of long-lived and stable isotopes of a variety of elements for successful user experiments. The BMIS system is described and results from the production of various beams are presented.
A porous pre-sintered hexagonal boron nitride powder compact was recently developed as target for the production of intense 11C beams for Positron Emission Tomography-aided hadron therapy. In a ...previous study, this target has been characterized regarding its operational limitations. In this work, microstructural characterization with respect to the target's grain size, porosity and pore structure, and a dedicated fractional release study from activated targets, i.e. how much 11C is extracted by a short heat treatment, is presented. Corresponding results include an average grain size of approximately 1.7(1) μm, total and open porosity of 40(5) and 21(7)%, respectively, which is mostly composed of pores with sizes ranging from 120 to 470 nm. From the measured release fraction the order of magnitude of carbon's diffusion coefficient D(1500 °C) = 10−15 − 10−14 cm2 s−1 in porous boron nitride, and a 11C extraction efficiency of about 10% at 1500 °C target temperature were estimated.
ISOLDE’s Offline 2 laboratory has been upgraded to facilitate development for the production and study of molecular ion beams. New gas injection systems have been implemented for both molecular ...formation in the ion source and in the radio-frequency quadrupole ion trap used for beam preparation. MagneToF detectors and time-resolved single ion counting data acquisition have been implemented for low intensity beams and studies of laser-atom or laser-molecule interactions. We present a study of the formation and ionization of BaF+ using the upgraded facility.
•ISOLDE’s Offline 2 mass separator facility has been upgraded for studies of molecular ion beams.•High-power laser light interacts with molecules to ionize and dissociate.•Barium and barium fluoride ions are ionized using laser light at 355 nm.
At the CERN-ISOLDE radioactive ion beam facility, thick targets are irradiated using a beam of 1.4-GeV protons. One of ISOLDE’s key features is the large choice of ion source types and target ...materials available, enabling us to select the ideal combination for optimal intensity and purity of the isotopes requested by ISOLDE users. The ever-increasing demands in terms of isotope production yield, beam purity, and overall reliability of the employed systems are driving the continuous development efforts.
Over the past few years, CERN has invested heavily in facilities and infrastructure that facilitate ongoing developments required for ISOLDE. A dedicated offline laboratory (Offline 2) has been recently equipped with high repetition rate nanosecond tunable lasers required for scheme development and developments of specialized laser ion source types such as VADLIS, LIST and PI-LIST. Moreover, it hosts a twin setup of the ISOLDE RFQ cooler and buncher (ISCOOL), which is envisaged to be used for studies of molecular beam creation and breakup, as well as the development of improved RFQ services and operational modes. For material development, particularly for nanostructured materials, the new nano laboratory has just been commissioned and will enable the production and development of nano actinide targets for ISOLDE. In this contribution we describe the infrastructure required for target and ion source developments, highlight recent efforts and experimental results on both target material development and ion source development, and provide an outlook on what to expect in the near future.
The use of radioactive molecules for fundamental physics research is a developing interdisciplinary field limited dominantly by their scarce availability. In this work, radioactive molecular ion ...beams containing actinide nuclei extracted from uranium carbide targets are produced via the Isotope Separation On-Line technique at the CERN-ISOLDE facility. Two methods of molecular beam production are studied: extraction of molecular ion beams from the ion source, and formation of molecular ions from the mass-separated ion beam in a gas-filled radio-frequency quadrupole ion trap. Ion currents of U+, UO1−3+, UC1−3+, UF1−4+, UF1,2O1,2+ are reported. Metastable tantalum and uranium fluoride molecular ions are identified. Formation of UO1−3+, U(OH)1−3+, UC1−3+, UF1,2O1,2+ from mass-separated beams of U+, UF1,2+ with residual gas is observed in the ion trap. The effect of trapping time on molecular formation is presented.
We introduce a novel thick-target concept tailored to the extraction of refractory 4d and 5d transition metal radionuclides of molybdenum, technetium, ruthenium and tungsten for radioactive ion beam ...production. Despite the more than 60-year old history of thick-target ISOL mass-separation facilities like ISOLDE, the extraction of these most refractory elements as radioactive ion beam has so far not been successful. In ordinary thick ISOL targets, their radioisotopes produced in the target are stopped within the condensed target material. Here, we present a concept which overcomes limitations associated with this method. We exploit the recoil momentum of nuclear reaction products for their release from the solid target material. They are thermalized in a carbon monoxide-containing atmosphere, in which volatile carbonyl complexes form readily at ambient temperature and pressure. This compound serves as volatile carrier for transport to the ion source. Excess carbon monoxide is removed by cryogenic gas separation to enable low pressures in the source region, in which the species are ionized and hence made available for radioactive ion beam formation. The setup is operated in batch mode. Initially, we investigate the feasibility of the approach with isotopes of more than 35s half-life. At the cost of reduced efficiency, the concept could also be applied to isotopes with half-lives of at least one to 10s. We report parameter studies of the key processes of the method, which validate this concept and which define the parameters for the setup. This would allow for the first time the extraction of radioactive molybdenum, tungsten and several other transition metals at thick-target ISOL facilities.
The Versatile Arc Discharge and Laser Ion Source (VADLIS) is a recently established ion source for the CERN-ISOLDE radioactive ion beam facility. It offers either electron-impact ionization ...(VADIS-mode) or resonance laser ionization (RILIS-mode). The choice of operating mode depends on the element of interest or the required beam purity. Particle-in-cell simulations using the VSim software show that the ion extraction efficiency of the VADLIS in RILIS-mode can be improved if it is equipped with an insulated extractor plate, to which an optimal voltage can be applied. This enables optimization of the RILIS-mode ion extraction independently of the electron density. Experiments have been performed using a prototype VADLIS with an adjustable extractor plate voltage for the generation of gallium ion beams at the off-line separator as well as magnesium, molybdenum and mercury ion beams at ISOLDE. A factor >2 increase of the VADLIS efficiency in RILIS-mode has been achieved.
.
The production of selenium ion beams has been investigated at the CERN-ISOLDE facility via two different ionization methods. Whilst molecular selenium (SeCO) beams were produced at ISOLDE since the ...early 1990s, recent attempts at reliably reproducing these results have so far been unsuccessful. Here we report on tests of a step-wise resonance laser ionization scheme for atomic selenium using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). For stable selenium an ionization efficiency of 1% was achieved. During the first on-line radioisotope production tests, a yield of
≈
2
.
4
×
10
4
ions/μC was measured for
71
Se
+
, using a ZrO
2
target with an electron impact ion source. In parallel, an approach for extraction of molecular carbonyl selenide (SeCO) beams was tested. The same ion source and target material were used and a maximum yield of
≈
3
.
6
×
10
5
ions/μ C of
71
SeCO
+
was measured.
PDF
