Two-dimensional (2D) materials have been studied extensively as monolayers, vertical or lateral heterostructures. To achieve functionalization, monolayers are often patterned using soft lithography ...and selectively decorated with molecules. Here we demonstrate the growth of a family of 2D materials that are intrinsically patterned. We demonstrate that a monolayer of PtSe
can be grown on a Pt substrate in the form of a triangular pattern of alternating 1T and 1H phases. Moreover, we show that, in a monolayer of CuSe grown on a Cu substrate, strain relaxation leads to periodic patterns of triangular nanopores with uniform size. Adsorption of different species at preferred pattern sites is also achieved, demonstrating that these materials can serve as templates for selective self-assembly of molecules or nanoclusters, as well as for the functionalization of the same substrate with two different species.
Despite the importance of immunological memory for protective immunity against viral infection, whether H7N9-specific antibodies and memory T-cell responses remain detectable years after the original ...infection is unknown.
A cross-sectional study was conducted to investigate the immune memory responses of H7N9 patients who contracted the disease and survived during the 2013–2016 epidemics in China. Sustainability of antibodies and T-cell memory to H7N9 virus were examined. Healthy individuals receiving routine medical examinations in a physical examination centre were recruited as control.
A total of 75 survivors were enrolled and classified into four groups based on the time elapsed from illness onset to specimen collection: 3 months (n = 14), 14 months (n = 14), 26 months (n = 28) and 36 months (n = 19). Approximately 36 months after infection, the geometric mean titres of virus-specific antibodies were significantly lower than titres in patients 3 months after infection, but 16 of 19 (84.2%) survivors in the 36-month interval had microneutralization (MN) titres ≥40. Despite the overall declining trend, the percentages of virus-specific cytokine-secreting memory CD4+ and CD8+ T cells remained higher in survivors at nearly all time-points in comparison with control individuals. Linear regression analysis showed that severe disease (mean titre ratio 2.77, 95% CI 1.17–6.49) was associated with higher haemagglutination inhibition (HI) titre and female sex for both HI (1.92, 1.02–3.57) and MN (3.33, 1.26–9.09) antibody, whereas female sex (mean percentage ratio 1.69, 95% CI 1.08–2.63), underlying medical conditions (1.94, 95% CI 1.09–3.46) and lack of antiviral therapy (2.08, 95% CI 1.04–4.17) were predictors for higher T-cell responses.
Survivors of H7N9 virus infection produced long-term antibodies and memory T-cell responses. Our findings warrant further serological investigation in general and high-risk populations and have important implications for vaccine design and development.
Carbon nanotubes-reinforced aluminum matrix (CNTs/Al) composites possess wide application prospects in many fields, and how to achieve a high performance is always a research hot spot. In this study, ...a novel high-performance Al matrix nanocomposite reinforced with short CNTs and in situ Al
4
C
3
nanorods was fabricated by combining ball milling and hot extrusion, and they exhibit excellent comprehensive mechanical properties. The 2 wt% CNTs/Al composite reached a tensile strength of 312 MP and an elongation of 15.8%, showing an 102% strength improvement compared with the pure aluminum prepared by the same process. The remarkable improvement of the mechanical properties originates from the synergistical enhancement of fine-grained strengthening and dispersion strengthening of in situ Al
4
C
3
nanorods and short CNTs.
Activated androgen receptor binds to androgen-responsive elements (AREs) in genome to regulate target gene transcription and, consequently, mediates physiological or tumorigenic processes of the ...prostate. Our aim was to determine whether genetic variants in AREs are associated with clinical outcomes after androgen-deprivation therapy (ADT) in prostate cancer patients.
We systematically investigated 55 common single-nucleotide polymorphisms (SNPs) in the genome-wide insilico-predicted AREs in a cohort of 601 men with advanced prostate cancer treated with ADT. The prognostic significance of these SNPs on disease progression, prostate cancer-specific mortality (PCSM) and all-cause mortality (ACM) after ADT was assessed by Kaplan–Meier analysis and Cox regression model.
In univariate analysis, two, five, and four SNPs were associated with disease progression, PCSM, and ACM, respectively. After adjusting for known prognostic factors, ARRDC3 rs2939244, FLT1 rs9508016, and SKAP1 rs6504145 remained as significant predictors for PCSM and FBXO32 rs7830622 and FLT1 rs9508016 remained as significant predictors for ACM in multivariate analysis. Moreover, strong combined genotype effects on PCSM and ACM were also observed (Ptrend < 0.001).
Our results suggest that SNPs in AREs influence prostate cancer survival and may further advance our understanding of the disease progression.
4D printing has a great potential for the manufacturing of soft robotics and medical devices. The alliance of digital light processing (DLP) 3D printing and novel shape-memory photopolymers allows ...for the fabrication of smart 4D-printed medical devices in high resolution and with tailorable functionalities. However, most of the reported 4D-printed materials are nondegradable, which limits their clinical applications. On the other hand, 4D printing of biodegradable shape-memory elastomers is highly challenging, especially when transition points close to physiological temperature and shape fixation under ambient conditions are required. Here, we report the 4D printing of biodegradable shape-memory elastomers with tailorable transition points covering physiological temperature, by using poly(D,L-lactide-co-trimethylene carbonate) methacrylates at various monomer feed ratios. After the programming step, the high-resolution DLP printed stents preserved their folded shape at room temperature, and showed efficient shape recovery at 37 °C. The materials were cytocompatible and readily degradable under physiological conditions. Furthermore, drug-loaded devices with tuneable release kinetics were realized by DLP-printing with resins containing polymers and levofloxacin or nintedanib. This study offers a new perspective for the development of next-generation 4D-printed medical devices.
Digital light 4D printing of biodegradable drug-eluting elastomeric devices with tailorable thermal response at the physiological temperature and tunable drug release. Display omitted
•Biodegradable shape-memory elastomers were DLP printed.•The materials displayed elasticity below and above their transition temperatures.•4D printed elastomeric stents showed efficient shape recovery at 37 °C.•4D printed drug-loaded devices showed tuneable release kinetics.
. Huang C‐N, Huang S‐P, Pao J‐B, Hour T‐C, Chang T‐Y, Lan Y‐H, Lu T‐L, Lee H‐Z, Juang S‐H, Wu P‐P, Huang C‐Y, Hsieh C‐J, Bao B‐Y (Kaohsiung Medical University Hospital, Kaohsiung; Kaohsiung Medical ...University, Kaohsiung; Taipei City Hospital, Taipei; Kaohsiung Medical University, Kaohsiung; China Medical University, Taichung; National Taiwan University Hospital; Oriental Institute of Technology; National Taiwan University, Taipei; China Medical University Hospital, Taichung, Taiwan). Genetic polymorphisms in oestrogen receptor‐binding sites affect clinical outcomes in patients with prostate cancer receiving androgen‐deprivation therapy. J Intern Med 2012; 271: 499–509.
Background. Accumulating evidence indicates that oestrogens have significant direct effects on normal prostate development and carcinogenesis. The majority of the biological activities of oestrogens are mediated through the oestrogen receptor (ER), which functions as a hormone‐inducible transcription factor to regulate target gene expression by binding to oestrogen response elements (EREs) in the regulatory regions of target genes. Sequence variants in EREs might affect the ER–ERE interaction and subsequent physiological activities. Therefore, we tested whether common single‐nucleotide polymorphisms (SNPs) inside EREs are related to the clinical outcomes of androgen‐deprivation therapy (ADT) in men with prostate cancer.
Methods. We systematically evaluated 49 ERE SNPs predicted using a genome‐wide database in a cohort of 601 men with advanced prostate cancer treated with ADT. The prognostic significance of these SNPs on disease progression, prostate cancer‐specific mortality (PCSM) and all‐cause mortality (ACM) after ADT was assessed using Kaplan–Meier analysis and a Cox regression model.
Results. Based on multiple hypothesis testing, BNC2 rs16934641 was found to be associated with disease progression; in addition, TACC2 rs3763763 was associated with PCSM, and ALPK1 rs2051778 and TACC2 rs3763763 were associated with ACM. These SNPs remained significant in multivariate analyses that included known clinicopathological predictors. Moreover, a combined genotype effect on ACM was observed when ALPK1 rs2051778 and TACC2 rs3763763 were analysed in combination. Patients with a greater number of unfavourable genotypes had a shorter time to ACM during ADT (P for trend <0.001).
Conclusion. The incorporation of ERE SNPs into models with known predictors might improve outcome prediction in patients with prostate cancer receiving ADT.
Background. Seven persons in one family living in eastern China developed fever and thrombocytopenia during May 2007, but the initial investigation failed to identify an infectious etiology. In ...December 2009, a novel bunyavirus (designated severe fever with thrombocytopenia syndrome bunyavirus SFTSV) was identified as the cause of illness in patients with similar clinical manifestations in China. We reexamined this family cluster for SFTSV infection. Methods. We analyzed epidemiological and clinical data for the index patient and 6 secondary patients. We tested stored blood specimens from the 6 secondary patients using real time reverse transcription polymerase chain reaction (RT-PCR), viral culture, genetic sequencing, micro-neutralization assay (MNA), and indirect immunofluorescence assay (IFA). Results. An 80-year-old woman with fever, leucopenia, and thrombocytopenia died on 27 April 2007. Between 3 and 7 May 2007, another 6 patients from her family were admitted to a local county hospital with fever and other similar symptoms. Serum specimens collected in 2007 from these 6 patients were positive for SFTS viral RNA through RT-PCR and for antibody to SFTSV through MNA and IFA. SFTSV was isolated from 1 preserved serum specimen. The only shared characteristic between secondary patients was personal contact with the index patient; none reported exposure to suspected animals or vectors. Conclusions. Clinical and laboratory evidence confirmed that the patients of fever and thrombocytopenia occurring in a family cluster in eastern China in 2007 were caused by a newly recognized bunyavirus, SFTSV. Epidemiological investigation strongly suggests that infection of secondary patients was transmitted to family members by personal contact.
Aims/hypothesis
FTO
harbours the strongest known obesity-susceptibility locus in Europeans. While there is growing evidence for a role for
FTO
in obesity risk in Asians, its association with type 2 ...diabetes, independently of BMI, remains inconsistent. To test whether there is an association of the
FTO
locus with obesity and type 2 diabetes, we conducted a meta-analysis of 32 populations including 96,551 East and South Asians.
Methods
All studies published on the association between
FTO
-rs9939609 (or proxy
r
2
> 0.98) and BMI, obesity or type 2 diabetes in East or South Asians were invited. Each study group analysed their data according to a standardised analysis plan. Association with type 2 diabetes was also adjusted for BMI. Random-effects meta-analyses were performed to pool all effect sizes.
Results
The
FTO
-rs9939609 minor allele increased risk of obesity by 1.25-fold/allele (
p
= 9.0 × 10
−19
), overweight by 1.13-fold/allele (
p
= 1.0 × 10
−11
) and type 2 diabetes by 1.15-fold/allele (
p
= 5.5 × 10
−8
). The association with type 2 diabetes was attenuated after adjustment for BMI (OR 1.10-fold/allele,
p
= 6.6 × 10
−5
). The
FTO
-rs9939609 minor allele increased BMI by 0.26 kg/m
2
per allele (
p
= 2.8 × 10
−17
), WHR by 0.003/allele (
p
= 1.2 × 10
−6
), and body fat percentage by 0.31%/allele (
p
= 0.0005). Associations were similar using dominant models. While the minor allele is less common in East Asians (12–20%) than South Asians (30–33%), the effect of
FTO
variation on obesity-related traits and type 2 diabetes was similar in the two populations.
Conclusions/interpretation
FTO
is associated with increased risk of obesity and type 2 diabetes, with effect sizes similar in East and South Asians and similar to those observed in Europeans. Furthermore,
FTO
is also associated with type 2 diabetes independently of BMI.
We report the properties of a field effect transistor (FET) and a gas sensor based on CuO nanowires. CuO nanowire FETs exhibit p-type behavior. Large-scale p-type CuO nanowire thin-film transistors ...(10(4) devices in a 25 mm(2) area) are fabricated and we effectively demonstrate their enhanced performance. Furthermore, CuO nanowire exhibits high and fast response to CO gas at 200 degrees C, which makes it a promising candidate for a poisonous gas sensing nanodevice.
Spontaneous milk fermentation has a long history in Mongolia, and beneficial microorganisms have been handed down from one generation to the next for use in fermented dairy products. The objective of ...this study was to investigate the diversity of lactic acid bacteria (LAB) communities in fermented yak, mare, goat, and cow milk products by analyzing 189 samples collected from 13 different regions in Mongolia. The LAB counts in these samples varied from 3.41 to 9.03 log cfu/mL. Fermented yak and mare milks had almost identical mean numbers of LAB, which were significantly higher than those in fermented goat milk but slightly lower than those in fermented cow milk. In total, 668 isolates were obtained from these samples using de Man, Rogosa, and Sharpe agar and M17 agar. Each isolate was considered to be presumptive LAB based on gram-positive and catalase-negative properties, and was identified at the species level by 16S rRNA gene sequencing, multiplex PCR assay, and restriction fragment length polymorphism analysis. All isolates from Mongolian dairy products were accurately identified as Enterococcus faecalis (1 strain), Enterococcus durans (3 strains), Lactobacillus brevis (3 strains), Lactobacillus buchneri (2 strains), Lactobacillus casei (16 strains), Lactobacillus delbrueckii ssp. bulgaricus (142 strains), Lactobacillus diolivorans (17 strains), Lactobacillus fermentum (42 strains), Lactobacillus helveticus (183 strains), Lactobacillus kefiri (6 strains), Lactobacillus plantarum ssp. plantarum (7 strains), Lactococcus lactis ssp. lactis (7 strains), Leuconostoc lactis (22 strains), Leuconostoc mesenteroides (21 strains), Streptococcus thermophilus (195 strains), and Weissella cibaria (1 strain). The predominant LAB were Strep. thermophilus and Lb. helveticus, which were isolated from all sampling sites. The results demonstrate that traditional fermented dairy products from different regions of Mongolia have complex compositions of LAB species. Such diversity of LAB provides useful information for further studies of probiotic strain selection and starter culture design, with regard to the industrial production of traditional fermented milk.